Question 1

A cylinder is an object that can be shown with one view.

Accepted Answer

A) True 
 B)False

Question 2

In first-angle projection ____.

Accepted Answer

A)  the object to be drawn is placed in the upper left quadrant, or the first quadrant 
B)  the object is between the viewer's line of sight and the projection plane 
C)  the views which are shown in multiview are the top, the front, and the left side 
D)  both a and b 
E)  all of the above 
A)  the object to be drawn is placed in the upper left quadrant, or the first quadrant 
B)  the object is between the viewer's line of sight and the projection plane 
C)  the views which are shown in multiview are the top, the front, and the left side 
D)  both a and b 
E)  all of the above

Question 3

Hidden lines are not used in a first-angle projection.

Accepted Answer

A) True 
 B)False

Question 4

Certain casting methods require that inside corners of parts have fillets.

Accepted Answer

A) True 
 B)False

Question 5

The front view of an object should:

Accepted Answer

A)  have the longest dimension 
B)  represent the most natural position of use 
C)  have the fewest hidden features 
D)  be the most stable and natural position 
E)  all of the above 
A)  have the longest dimension 
B)  represent the most natural position of use 
C)  have the fewest hidden features 
D)  be the most stable and natural position 
E)  all of the above

Question 6

An object can be so complex as to warrant using all available views in order to describe it adequately.

Accepted Answer

A) True 
 B)False

Question 7

Hidden lines ____.

Accepted Answer

A)  take precedence over centerline 
B)  should be kept to a minimum in front views 
C)  should not be shown in partial views 
D)  both a and b 
E)  all of the above 
A)  take precedence over centerline 
B)  should be kept to a minimum in front views 
C)  should not be shown in partial views 
D)  both a and b 
E)  all of the above

Question 8

The front view should:

Accepted Answer

A)  Represent the most natural position of use. 
B)  Provide the best shape description or most characteristic contours. 
C)  Have the longest dimension. 
D)  Have the fewest hidden features. 
E)  all of the above 
A)  Represent the most natural position of use. 
B)  Provide the best shape description or most characteristic contours. 
C)  Have the longest dimension. 
D)  Have the fewest hidden features. 
E)  all of the above

Question 9

Orthographic projection ____.

Accepted Answer

A)  is any projection of the features of an object onto an imaginary plane called a plane of projection 
B)  is a projection of the features of an object which is made by lines of sight that are perpendicular to the plane of projection 
C)  is the way in which a circle will be shown in a view as completely round instead of as an ellipse 
D)  both a and b 
E)  all of the above 
A)  is any projection of the features of an object onto an imaginary plane called a plane of projection 
B)  is a projection of the features of an object which is made by lines of sight that are perpendicular to the plane of projection 
C)  is the way in which a circle will be shown in a view as completely round instead of as an ellipse 
D)  both a and b 
E)  all of the above

Question 10

How are the sheets of a multi sheet drawing numbered?

Accepted Answer

Each sheet has the same drawing number o

Question 11

Give three rules of line precedence?

Accepted Answer

Object lines take precedence o

Question 12

When an object has shape and a uniform thickness, more than one view is unnecessary, especially if the view is identified by dimensional shape.

Accepted Answer

A) True 
 B)False

Question 13

Slightly contoured objects can be shown in multiview as having rounded features by ____ to accent the rounded features.

Accepted Answer

A)  using phantom lines 
B)  shading 
C)  using light continuous lines 
D)  both a and b 
E)  none of the above 
A)  using phantom lines 
B)  shading 
C)  using light continuous lines 
D)  both a and b 
E)  none of the above

Question 14

If a centerline, a hidden line, and a visible line all occur at the same space on a multiview print, which line takes precedence?

Accepted Answer

A)  centerline 
B)  hidden line 
C)  visible line 
D)  cutting plane line 
E)  not enough information to assess an answer 
A)  centerline 
B)  hidden line 
C)  visible line 
D)  cutting plane line 
E)  not enough information to assess an answer

Question 15

A multiview drawing can represents the shape of an object using one view.

Accepted Answer

A) True 
 B)False

Question 16

It is important to have contours represented correctly for accurate print reading.

Accepted Answer

A) True 
 B)False

Question 17

A first-angle projection shows only the front view, the right side view, and the top view.

Accepted Answer

A) True 
 B)False

Question 18

The result of a multiview projection is a multiview drawing.

Accepted Answer

A) True 
 B)False

Question 19

Keeping in mind that the intent of a print is to communicate the manufacture of a product easily, which of the following are true?

Accepted Answer

A)  Use enough views to describe the shape of the object accurately and completely. 
B)  Rounds and fillets do not need to be shown in multiviews accurately. 
C)  The accenting of rounded curves should be shown in multiviews with a phantom line so the curves are clearly accented. 
D)  both a and c 
E)  all of the above 
A)  Use enough views to describe the shape of the object accurately and completely. 
B)  Rounds and fillets do not need to be shown in multiviews accurately. 
C)  The accenting of rounded curves should be shown in multiviews with a phantom line so the curves are clearly accented. 
D)  both a and c 
E)  all of the above

Question 20

When a sharp exterior corner has only a slight relief, it is called a ____.

Accepted Answer

A)  fillet 
B)  round 
C)  runout 
D)  break corner 
E)  none of the above 
A)  fillet 
B)  round 
C)  runout 
D)  break corner 
E)  none of the above

A cylinder is an object that can be shown with one view.

In first-angle projection ____.

Hidden lines are not used in a first-angle projection.

Certain casting methods require that inside corners of parts have fillets.

The front view of an object should:

An object can be so complex as to warrant using all available views in order to describe it adequately.

Hidden lines ____.

The front view should:

Orthographic projection ____.

How are the sheets of a multi sheet drawing numbered?

Give three rules of line precedence?

When an object has shape and a uniform thickness, more than one view is unnecessary, especially if the view is identified by dimensional shape.

Slightly contoured objects can be shown in multiview as having rounded features by ____ to accent the rounded features.

If a centerline, a hidden line, and a visible line all occur at the same space on a multiview print, which line takes precedence?

A multiview drawing can represents the shape of an object using one view.

It is important to have contours represented correctly for accurate print reading.

A first-angle projection shows only the front view, the right side view, and the top view.

The result of a multiview projection is a multiview drawing.

Keeping in mind that the intent of a print is to communicate the manufacture of a product easily, which of the following are true?

When a sharp exterior corner has only a slight relief, it is called a ____.

Introduction to Engineering and Manufacturing Technology Print Reading

Communicating with a Sketch

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Auxiliary Views

Manufacturing Materials and Processes

Reading Dimensions

Reading Prints With Fasteners and Springs

Reading Sections, Revolutions, and Conventional Breaks

Reading Geometric Dimensioning and Tolerancing

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Reading Prints of Working Drawings

Welding Processes and Reading Welding Representations

Reading Prints of Pictorial Drawings

Reading Electrical Diagrams and Schematics

Filters

Exam 5: Reading Multiviews

A cylinder is an object that can be shown with one view.

In first-angle projection ____.

Hidden lines are not used in a first-angle projection.

Certain casting methods require that inside corners of parts have fillets.

The front view of an object should:

An object can be so complex as to warrant using all available views in order to describe it adequately.

Hidden lines ____.

The front view should:

Orthographic projection ____.

How are the sheets of a multi sheet drawing numbered?

Give three rules of line precedence?

When an object has shape and a uniform thickness, more than one view is unnecessary, especially if the view is identified by dimensional shape.

Slightly contoured objects can be shown in multiview as having rounded features by ____ to accent the rounded features.

If a centerline, a hidden line, and a visible line all occur at the same space on a multiview print, which line takes precedence?

A multiview drawing can represents the shape of an object using one view.

It is important to have contours represented correctly for accurate print reading.

A first-angle projection shows only the front view, the right side view, and the top view.

The result of a multiview projection is a multiview drawing.

Keeping in mind that the intent of a print is to communicate the manufacture of a product easily, which of the following are true?

When a sharp exterior corner has only a slight relief, it is called a ____.

Introduction to Engineering and Manufacturing Technology Print Reading

Communicating with a Sketch

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Auxiliary Views

Manufacturing Materials and Processes

Reading Dimensions

Reading Prints With Fasteners and Springs

Reading Sections, Revolutions, and Conventional Breaks

Reading Geometric Dimensioning and Tolerancing

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Reading Prints of Working Drawings

Welding Processes and Reading Welding Representations

Reading Prints of Pictorial Drawings

Reading Electrical Diagrams and Schematics

Filters