Question 1

An alternate removed section ____.

Accepted Answer

A)  needs to be properly labeled with the cutting plane label 
B)  should be shown at the same scale as the part from which it came 
C)  can be rotated around its own centerline and shown on the centerline outside the part 
D)  both a and c 
E)  none of the above 
A)  needs to be properly labeled with the cutting plane label 
B)  should be shown at the same scale as the part from which it came 
C)  can be rotated around its own centerline and shown on the centerline outside the part 
D)  both a and c 
E)  none of the above

Question 2

A _______________ can be shown when a feature has a constant shape throughout the length that cannot be shown in an external view, and the types of feature shapes that are common with are extrusions, spokes, beams, and arms.

Accepted Answer

The answer of A _______________ can be shown when a...

Question 3

A revolved section ____.

Accepted Answer

A)  has a cutting plane line placed through the object to show where the section is taken 
B)  can be drawn to a larger scale so close detail can be more clearly identified 
C)  should be labeled to correspond with the cutting plane line 
D)  all of the above 
E)  none of the above 
A)  has a cutting plane line placed through the object to show where the section is taken 
B)  can be drawn to a larger scale so close detail can be more clearly identified 
C)  should be labeled to correspond with the cutting plane line 
D)  all of the above 
E)  none of the above

Question 4

Removed sections are generally placed in direct alignment with the cutting plane line.

Accepted Answer

A) True 
 B)False

Question 5

A cutting plane line staggers completely through an object at 90° angles. The section on the drawing is a(n) ____.

Accepted Answer

A)  full section 
B)  half section 
C)  aligned section 
D)  removed section 
E)  none of the above 
A)  full section 
B)  half section 
C)  aligned section 
D)  removed section 
E)  none of the above

Question 6

Multiple removed sections are generally arranged on the sheet in alphabetical order from left to right and top to bottom.

Accepted Answer

A) True 
 B)False

Question 7

____________________ or _________________________ are used to describe in interior portions of an object that are otherwise difficult to visualize.

Accepted Answer

Sections, sectional

Question 8

Hidden features are dimensioned when they are exposed by using a sectional view.

Accepted Answer

A) True 
 B)False

Question 9

The sectional view normally projects from the view that has the cutting plane just like multiview projection.

Accepted Answer

A) True 
 B)False

Question 10

The American Society of Mechanical Engineers document that governs sectioning techniques is ____.

Accepted Answer

A)  ASME Y14.5 titled Multi and Sectional View Drawings. 
B)  ASME Y14.3 titled Sectional View Drawings. 
C)  ASME Y14.3 titled Multi View Drawings. 
D)  ASME Y14.3 titled Multi and Sectional View Drawings. 
E)  none of the above 
A)  ASME Y14.5 titled Multi and Sectional View Drawings. 
B)  ASME Y14.3 titled Sectional View Drawings. 
C)  ASME Y14.3 titled Multi View Drawings. 
D)  ASME Y14.3 titled Multi and Sectional View Drawings. 
E)  none of the above

Question 11

Bronze and cast iron materials look the same in section.

Accepted Answer

A) True 
 B)False

Question 12

The American Society of Mechanical Engineers document that governs sectioning techniques is ASME Y14.3 titled Multi and Sectional View Drawings.

Accepted Answer

A) True 
 B)False

Question 13

These can be used when a long object of constant shape throughout its length requires shortening.

Accepted Answer

A)  Conventional breaks 
B)  Conventional revolution 
C)  Broken out section 
D)  Removed section 
E)  none of the above 
A)  Conventional breaks 
B)  Conventional revolution 
C)  Broken out section 
D)  Removed section 
E)  none of the above

Question 14

Half sections can be used when a symmetrical object requires sectioning.

Accepted Answer

A) True 
 B)False

Question 15

An alternate practice for providing removed and sectional views.

Accepted Answer

A)  Alternate method 
B)  Rotated method 
C)  Arrow method 
D)  Removed method 
E)  none of the above 
A)  Alternate method 
B)  Rotated method 
C)  Arrow method 
D)  Removed method 
E)  none of the above

Question 16

Section lines are thick.

Accepted Answer

A) True 
 B)False

Question 17

The ________ cutting-plane line staggers to pass through offset features of an object, and normally the change in direction of the cutting-plane line is less than 90°.

Accepted Answer

The answer of The ________ cutting-plane line staggers to pass...

Question 18

Hidden lines in multiple removed sections are omitted for clarity.

Accepted Answer

A) True 
 B)False

Question 19

Multiple removed sections are generally arranged on the sheet in ________________ from left to right and top to bottom.

Accepted Answer

The answer of Multiple removed sections are generally arranged on...

Question 20

_____________ can be shown when a long object of constant shape throughout its length requires shortening to fit on a sheet or for creating a partial view.

Accepted Answer

The answer of _____________ can be shown when a long...

An alternate removed section ____.

A _______________ can be shown when a feature has a constant shape throughout the length that cannot be shown in an external view, and the types of feature shapes that are common with are extrusions, spokes, beams, and arms.

A revolved section ____.

Removed sections are generally placed in direct alignment with the cutting plane line.

A cutting plane line staggers completely through an object at 90° angles. The section on the drawing is a(n) ____.

Multiple removed sections are generally arranged on the sheet in alphabetical order from left to right and top to bottom.

or _____ are used to describe in interior portions of an object that are otherwise difficult to visualize.

Hidden features are dimensioned when they are exposed by using a sectional view.

The sectional view normally projects from the view that has the cutting plane just like multiview projection.

The American Society of Mechanical Engineers document that governs sectioning techniques is ____.

Bronze and cast iron materials look the same in section.

The American Society of Mechanical Engineers document that governs sectioning techniques is ASME Y14.3 titled Multi and Sectional View Drawings.

These can be used when a long object of constant shape throughout its length requires shortening.

Half sections can be used when a symmetrical object requires sectioning.

An alternate practice for providing removed and sectional views.

Section lines are thick.

The ________ cutting-plane line staggers to pass through offset features of an object, and normally the change in direction of the cutting-plane line is less than 90°.

Hidden lines in multiple removed sections are omitted for clarity.

Multiple removed sections are generally arranged on the sheet in ________________ from left to right and top to bottom.

_____________ can be shown when a long object of constant shape throughout its length requires shortening to fit on a sheet or for creating a partial view.

Introduction to Engineering and Manufacturing Technology Print Reading

Communicating with a Sketch

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Multiviews

Reading Auxiliary Views

Manufacturing Materials and Processes

Reading Dimensions

Reading Prints With Fasteners and Springs

Reading Geometric Dimensioning and Tolerancing

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Reading Prints of Working Drawings

Welding Processes and Reading Welding Representations

Reading Prints of Pictorial Drawings

Reading Electrical Diagrams and Schematics

Filters

Exam 10: Reading Sections, Revolutions, and Conventional Breaks

An alternate removed section ____.

A _______________ can be shown when a feature has a constant shape throughout the length that cannot be shown in an external view, and the types of feature shapes that are common with are extrusions, spokes, beams, and arms.

A revolved section ____.

Removed sections are generally placed in direct alignment with the cutting plane line.

A cutting plane line staggers completely through an object at 90° angles. The section on the drawing is a(n) ____.

Multiple removed sections are generally arranged on the sheet in alphabetical order from left to right and top to bottom.

____________________ or _________________________ are used to describe in interior portions of an object that are otherwise difficult to visualize.

Hidden features are dimensioned when they are exposed by using a sectional view.

The sectional view normally projects from the view that has the cutting plane just like multiview projection.

The American Society of Mechanical Engineers document that governs sectioning techniques is ____.

Bronze and cast iron materials look the same in section.

The American Society of Mechanical Engineers document that governs sectioning techniques is ASME Y14.3 titled Multi and Sectional View Drawings.

These can be used when a long object of constant shape throughout its length requires shortening.

Half sections can be used when a symmetrical object requires sectioning.

An alternate practice for providing removed and sectional views.

Section lines are thick.

The ________ cutting-plane line staggers to pass through offset features of an object, and normally the change in direction of the cutting-plane line is less than 90°.

Hidden lines in multiple removed sections are omitted for clarity.

Multiple removed sections are generally arranged on the sheet in ________________ from left to right and top to bottom.

_____________ can be shown when a long object of constant shape throughout its length requires shortening to fit on a sheet or for creating a partial view.

Introduction to Engineering and Manufacturing Technology Print Reading

Communicating with a Sketch

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Multiviews

Reading Auxiliary Views

Manufacturing Materials and Processes

Reading Dimensions

Reading Prints With Fasteners and Springs

Reading Geometric Dimensioning and Tolerancing

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Reading Prints of Working Drawings

Welding Processes and Reading Welding Representations

Reading Prints of Pictorial Drawings

Reading Electrical Diagrams and Schematics

Filters

or _____ are used to describe in interior portions of an object that are otherwise difficult to visualize.