Question 1

Coaxial means that one or more features have similar axes.

Accepted Answer

A) True 
 B)False

Question 2

____ is the theoretically exact location of the axis or center plane of the feature.

Accepted Answer

A)  Exact position 
B)  True position 
C)  Center position 
D)  Specified position 
E)  Axis position 
A)  Exact position 
B)  True position 
C)  Center position 
D)  Specified position 
E)  Axis position

Question 3

The primary, secondary, and tertiary datum planes are equally important.

Accepted Answer

A) True 
 B)False

Question 4

The datums shown in alphabetical order that appear in the feature control frame are not chosen for in any particular reason.

Accepted Answer

A) True 
 B)False

Question 5

The form of a feature is controlled by the location tolerance limits.

Accepted Answer

A) True 
 B)False

Question 6

An ___________________________ tolerance splits the tolerance zone on each side of true profile, but the distance on each side is not equal.

Accepted Answer

unequally

Question 7

How is a screw thread used as a datum axis unless otherwise specified, and what do you specify if you do not want the implied definition?

Accepted Answer

When a screw thread is used as a datum a

Question 8

The type(s) of profile is (are) ____.

Accepted Answer

A)  profile of a line 
B)  profile of an arc 
C)  profile of a surface 
D)  profile of a circle 
E)  both a and c 
A)  profile of a line 
B)  profile of an arc 
C)  profile of a surface 
D)  profile of a circle 
E)  both a and c

Question 9

Which one of the following describes the left to right order of a feature control frame?

Accepted Answer

A)  tolerance zone descriptor, geometric characteristic, geometric characteristic tolerance, primary datum reference 
B)  geometric characteristic tolerance, geometric characteristic, tolerance zone descriptor, datum reference 
C)  geometric characteristic symbol, tolerance zone descriptor, geometric characteristic tolerance, datum reference 
D)  geometric characteristic symbol, material condition symbol, geometric characteristic tolerance, tolerance zone descriptor, multiple datum reference 
E)  none of the above 
A)  tolerance zone descriptor, geometric characteristic, geometric characteristic tolerance, primary datum reference 
B)  geometric characteristic tolerance, geometric characteristic, tolerance zone descriptor, datum reference 
C)  geometric characteristic symbol, tolerance zone descriptor, geometric characteristic tolerance, datum reference 
D)  geometric characteristic symbol, material condition symbol, geometric characteristic tolerance, tolerance zone descriptor, multiple datum reference 
E)  none of the above

Question 10

Identify the primary standard published by the American Society of Mechanical Engineers (ASME) that establishes uniform practices for stating and interpreting dimensioning, tolerancing, and related requirements for use on engineering drawings and related documents.

Accepted Answer

ASME Y14.5-2009 titl

Question 11

When the axis of the hole at an extreme angle inside the positional tolerance zone. This is referred to as _________________________.

Accepted Answer

extreme at

Question 12

Coplanar surfaces are three or more surfaces that are in the same plane.

Accepted Answer

A) True 
 B)False

Question 13

When locating holes using positional tolerancing, the location dimensions must be _________.

Accepted Answer

The answer of When locating holes using positional tolerancing, the...

Question 14

When the axis of the hole at the extreme side of the positional tolerance zone. This is referred to as _________________________.

Accepted Answer

extreme po

Question 15

A basic dimension is any size or location dimension that is used to identify the theoretically exact ____ of a feature or datum target.

Accepted Answer

A)  size 
B)  profile 
C)  location 
D)  orientation 
E)  all of the above 
A)  size 
B)  profile 
C)  location 
D)  orientation 
E)  all of the above

Question 16

Describe how and why zero geometric tolerance is specified at MMC.

Accepted Answer

Zero geometric tolerance at MMC can be a

Question 17

________________ dimensioning combines angular dimensions with other dimensions to locate features from planes, centerlines, or center planes.

Accepted Answer

The answer of ________________ dimensioning combines angular dimensions with other...

Question 18

The parallelism geometric characteristic symbol consists of two vertical parallel lines.

Accepted Answer

A) True 
 B)False

Question 19

The three plane dimensioning system used for datum referencing is called ____.

Accepted Answer

A)  a partial surface datum 
B)  a coplanar surface datum 
C)  a datum axis 
D)  feature control frame 
E)  none of the above 
A)  a partial surface datum 
B)  a coplanar surface datum 
C)  a datum axis 
D)  feature control frame 
E)  none of the above

Question 20

When the word "BOUNDARY" is placed below each feature control frame, it means that slotted holes are positioned by the extent of their boundaries.

Accepted Answer

A) True 
 B)False

Coaxial means that one or more features have similar axes.

____ is the theoretically exact location of the axis or center plane of the feature.

The primary, secondary, and tertiary datum planes are equally important.

The datums shown in alphabetical order that appear in the feature control frame are not chosen for in any particular reason.

The form of a feature is controlled by the location tolerance limits.

An ___________________________ tolerance splits the tolerance zone on each side of true profile, but the distance on each side is not equal.

How is a screw thread used as a datum axis unless otherwise specified, and what do you specify if you do not want the implied definition?

The type(s) of profile is (are) ____.

Which one of the following describes the left to right order of a feature control frame?

Identify the primary standard published by the American Society of Mechanical Engineers (ASME) that establishes uniform practices for stating and interpreting dimensioning, tolerancing, and related requirements for use on engineering drawings and related documents.

When the axis of the hole at an extreme angle inside the positional tolerance zone. This is referred to as _________________________.

Coplanar surfaces are three or more surfaces that are in the same plane.

When locating holes using positional tolerancing, the location dimensions must be _________.

When the axis of the hole at the extreme side of the positional tolerance zone. This is referred to as _________________________.

A basic dimension is any size or location dimension that is used to identify the theoretically exact ____ of a feature or datum target.

Describe how and why zero geometric tolerance is specified at MMC.

________________ dimensioning combines angular dimensions with other dimensions to locate features from planes, centerlines, or center planes.

The parallelism geometric characteristic symbol consists of two vertical parallel lines.

The three plane dimensioning system used for datum referencing is called ____.

When the word "BOUNDARY" is placed below each feature control frame, it means that slotted holes are positioned by the extent of their boundaries.

Introduction to Engineering and Manufacturing Technology Print Reading

Communicating with a Sketch

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Multiviews

Reading Auxiliary Views

Manufacturing Materials and Processes

Reading Dimensions

Reading Prints With Fasteners and Springs

Reading Sections, Revolutions, and Conventional Breaks

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Reading Prints of Working Drawings

Welding Processes and Reading Welding Representations

Reading Prints of Pictorial Drawings

Reading Electrical Diagrams and Schematics

Filters

Exam 11: Reading Geometric Dimensioning and Tolerancing

Coaxial means that one or more features have similar axes.

____ is the theoretically exact location of the axis or center plane of the feature.

The primary, secondary, and tertiary datum planes are equally important.

The datums shown in alphabetical order that appear in the feature control frame are not chosen for in any particular reason.

The form of a feature is controlled by the location tolerance limits.

An ___________________________ tolerance splits the tolerance zone on each side of true profile, but the distance on each side is not equal.

How is a screw thread used as a datum axis unless otherwise specified, and what do you specify if you do not want the implied definition?

The type(s) of profile is (are) ____.

Which one of the following describes the left to right order of a feature control frame?

Identify the primary standard published by the American Society of Mechanical Engineers (ASME) that establishes uniform practices for stating and interpreting dimensioning, tolerancing, and related requirements for use on engineering drawings and related documents.

When the axis of the hole at an extreme angle inside the positional tolerance zone. This is referred to as _________________________.

Coplanar surfaces are three or more surfaces that are in the same plane.

When locating holes using positional tolerancing, the location dimensions must be _________.

When the axis of the hole at the extreme side of the positional tolerance zone. This is referred to as _________________________.

A basic dimension is any size or location dimension that is used to identify the theoretically exact ____ of a feature or datum target.

Describe how and why zero geometric tolerance is specified at MMC.

________________ dimensioning combines angular dimensions with other dimensions to locate features from planes, centerlines, or center planes.

The parallelism geometric characteristic symbol consists of two vertical parallel lines.

The three plane dimensioning system used for datum referencing is called ____.

When the word "BOUNDARY" is placed below each feature control frame, it means that slotted holes are positioned by the extent of their boundaries.

Introduction to Engineering and Manufacturing Technology Print Reading

Communicating with a Sketch

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Multiviews

Reading Auxiliary Views

Manufacturing Materials and Processes

Reading Dimensions

Reading Prints With Fasteners and Springs

Reading Sections, Revolutions, and Conventional Breaks

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Reading Prints of Working Drawings

Welding Processes and Reading Welding Representations

Reading Prints of Pictorial Drawings

Reading Electrical Diagrams and Schematics

Filters