Question 1

The type of weld is associated with the weld shape and/or they type of groove to which the weld is applied.

Accepted Answer

A) True 
 B)False

Question 2

The components of a welding symbol, the reference line, the leader, and the tail, must always be used.

Accepted Answer

A) True 
 B)False

Question 3

A welding symbol has a circle on the reference line with its center at the intersection of the reference line and leader line. Another circle has its center at the middle of the reference line. Next to this circle is the notation "40". A vertical line starts at the center of the first circle and is drawn upwards, and a small filled in equilateral triangle is attached to the top with one side on the vertical line. What does this welding symbol signify?

Accepted Answer

A)  A weld is to be made all around. The kind of weld is not specified. The weld will have a minimum shear strength of 40 pounds per linear inch of weld. 
B)  40 spot welds are to be made all around in the field. 
C)  40 welds are to be made all around. The weld will have a minimum shear strength of 40 pounds per linear inch of weld. 
D)  A weld is to be made all around in the field. The weld will have a minimum shear strength of 40 pounds per linear inch of weld. 
E)  None of the above. This is an incorrect symbol. 
A)  A weld is to be made all around. The kind of weld is not specified. The weld will have a minimum shear strength of 40 pounds per linear inch of weld. 
B)  40 spot welds are to be made all around in the field. 
C)  40 welds are to be made all around. The weld will have a minimum shear strength of 40 pounds per linear inch of weld. 
D)  A weld is to be made all around in the field. The weld will have a minimum shear strength of 40 pounds per linear inch of weld. 
E)  None of the above. This is an incorrect symbol.

Question 4

Intermittent welds that have a pitch of 3 have 3 inches in between welds.

Accepted Answer

A) True 
 B)False

Question 5

Associated with ____ applications are soldering, brazing, and braze welding.

Accepted Answer

A)  shielded metal arc welding process 
B)  gas metal arc welding process 
C)  oxyfuel welding process 
D)  gas tungsten arc welding process 
E)  none of the above 
A)  shielded metal arc welding process 
B)  gas metal arc welding process 
C)  oxyfuel welding process 
D)  gas tungsten arc welding process 
E)  none of the above

Question 6

Gas tungsten welding is sometimes called?

Accepted Answer

TIG or Hel

Question 7

A welding symbol consists of a flange weld with three numbers associated with it. The first number is 1/8, the second number is 3/8, and they are connected by a "+". The third number, 3/32 is shown below the first two numbers. What does this symbol mean?

Accepted Answer

A)  The radius of the weld is 3/8", the distance to the weld surface from the end of the fillet is 1/8", and the depth of penetration of the weld is 3/32". 
B)  The radius of the weld is 3/32", the distance to the weld surface from the end of the fillet is 3/8", and the depth of penetration of the weld is 1/8". 
C)  The radius of the weld is 1/8", the distance to the weld surface from the end of the fillet is 3/32", and the depth of penetration of the weld is 3/8". 
D)  The radius of the weld is 1/8", the distance to the weld surface from the end of the fillet is 3/8", and the depth of penetration of the weld is 3/32". 
E)  None of the above. This is an incorrect symbol. 
A)  The radius of the weld is 3/8", the distance to the weld surface from the end of the fillet is 1/8", and the depth of penetration of the weld is 3/32". 
B)  The radius of the weld is 3/32", the distance to the weld surface from the end of the fillet is 3/8", and the depth of penetration of the weld is 1/8". 
C)  The radius of the weld is 1/8", the distance to the weld surface from the end of the fillet is 3/32", and the depth of penetration of the weld is 3/8". 
D)  The radius of the weld is 1/8", the distance to the weld surface from the end of the fillet is 3/8", and the depth of penetration of the weld is 3/32". 
E)  None of the above. This is an incorrect symbol.

Question 8

A J groove weld is to be made at a joint on the arrow side. The weld is to undergo a nondestructive radiographic test and the angle at which the test is to be made is 25° from vertical. Which of the following describes how this welding symbol will look?

Accepted Answer

A)  The reference line has the symbol for a J groove weld under it. The notation "RT" is on the top of the reference line. A special symbol in the shape of an asterisk is shown at an angle of 25° vertical from the weld, and the angle is marked. 
B)  The reference line has the notation "RT" under it along with the symbol for a J groove weld. A special symbol in the shape of an asterisk is shown at an angle of 25° vertical from the weld, and the angle is marked. 
C)  Two parallel reference lines are used and they are both connected to the leader line. The lower reference line has the notation "RT" under it, and the upper reference line has the symbol for a J groove weld under it. A special symbol in the shape of an asterisk is shown at an angle of 25° vertical from the weld, and the angle is marked. 
D)  Two parallel reference lines are used and they are both connected to the leader line. The upper reference line has the notation "RT" under it, and the lower reference line has the symbol for a J groove weld under it. A special symbol in the shape of an asterisk is shown at an angle of 25° vertical from the weld, and the angle is marked. 
E)  none of the above 
A)  The reference line has the symbol for a J groove weld under it. The notation "RT" is on the top of the reference line. A special symbol in the shape of an asterisk is shown at an angle of 25° vertical from the weld, and the angle is marked. 
B)  The reference line has the notation "RT" under it along with the symbol for a J groove weld. A special symbol in the shape of an asterisk is shown at an angle of 25° vertical from the weld, and the angle is marked. 
C)  Two parallel reference lines are used and they are both connected to the leader line. The lower reference line has the notation "RT" under it, and the upper reference line has the symbol for a J groove weld under it. A special symbol in the shape of an asterisk is shown at an angle of 25° vertical from the weld, and the angle is marked. 
D)  Two parallel reference lines are used and they are both connected to the leader line. The upper reference line has the notation "RT" under it, and the lower reference line has the symbol for a J groove weld under it. A special symbol in the shape of an asterisk is shown at an angle of 25° vertical from the weld, and the angle is marked. 
E)  none of the above

Question 9

Unless otherwise specified, a weld ___________________________________ the thickness of the parts at the joint.

Accepted Answer

The answer of Unless otherwise specified, a weld ___________________________________ the...

Question 10

The letter designating a flush contour weld is placed above the flush contour symbol for another side application, or below the flush contour symbol for an arrow side application.

Accepted Answer

A) True 
 B)False

Question 11

The most traditionally used welding method is the shielded metal arc welding process.

Accepted Answer

A) True 
 B)False

Question 12

If the weld is to be deposited on the arrow side of the joint, the proper weld symbol is placed above the reference line.

Accepted Answer

A) True 
 B)False

Question 13

Gas tungsten arc welding is generally limited to thin materials, high integrity joints, or small parts.

Accepted Answer

A) True 
 B)False

Question 14

Name the American Welding Society (AWS) standard for welding drafting practices developed in accordance with rules of the American National Standards Institute (ANSI), and published by the American Welding Society.

Accepted Answer

AWS A2.4, Standard S

Question 15

Describe the metric welding symbol practices such as those used in the British Standard.

Accepted Answer

Metric welding symbol practices such as

Question 16

Compression, bending, torsion, and shear are examples of the types of ____ used on welds.

Accepted Answer

A)  welding processes 
B)  weld strength designations 
C)  destructive tests 
D)  strengthening of joints 
E)  none of the above 
A)  welding processes 
B)  weld strength designations 
C)  destructive tests 
D)  strengthening of joints 
E)  none of the above

Question 17

Weld symbol indicates the type of weld and is part of the welding symbol.

Accepted Answer

A) True 
 B)False

Question 18

____ are made in holes in a piece of metal that is lapped over another piece of metal.

Accepted Answer

A)  Field welds 
B)  U groove welds 
C)  Plug welds 
D)  Flush contour welds 
E)  none of the above 
A)  Field welds 
B)  U groove welds 
C)  Plug welds 
D)  Flush contour welds 
E)  none of the above

Question 19

High quality welds can be made rapidly with excellent uniformity on a wide variety of metals and thicknesses when using the ____ welding process.

Accepted Answer

A)  soldering 
B)  shielded metal arc 
C)  gas tungsten arc 
D)  stick electrode 
E)  both b and d 
A)  soldering 
B)  shielded metal arc 
C)  gas tungsten arc 
D)  stick electrode 
E)  both b and d

Question 20

A weld is always ____________________ unless the welding symbol specifies a weld length and pitch.

Accepted Answer

The answer of A weld is always ____________________ unless the...

The type of weld is associated with the weld shape and/or they type of groove to which the weld is applied.

The components of a welding symbol, the reference line, the leader, and the tail, must always be used.

Intermittent welds that have a pitch of 3 have 3 inches in between welds.

Associated with ____ applications are soldering, brazing, and braze welding.

Gas tungsten welding is sometimes called?

A welding symbol consists of a flange weld with three numbers associated with it. The first number is 1/8, the second number is 3/8, and they are connected by a "+". The third number, 3/32 is shown below the first two numbers. What does this symbol mean?

A J groove weld is to be made at a joint on the arrow side. The weld is to undergo a nondestructive radiographic test and the angle at which the test is to be made is 25° from vertical. Which of the following describes how this welding symbol will look?

Unless otherwise specified, a weld ___________________________________ the thickness of the parts at the joint.

The letter designating a flush contour weld is placed above the flush contour symbol for another side application, or below the flush contour symbol for an arrow side application.

The most traditionally used welding method is the shielded metal arc welding process.

If the weld is to be deposited on the arrow side of the joint, the proper weld symbol is placed above the reference line.

Gas tungsten arc welding is generally limited to thin materials, high integrity joints, or small parts.

Name the American Welding Society (AWS) standard for welding drafting practices developed in accordance with rules of the American National Standards Institute (ANSI), and published by the American Welding Society.

Describe the metric welding symbol practices such as those used in the British Standard.

Compression, bending, torsion, and shear are examples of the types of ____ used on welds.

Weld symbol indicates the type of weld and is part of the welding symbol.

____ are made in holes in a piece of metal that is lapped over another piece of metal.

High quality welds can be made rapidly with excellent uniformity on a wide variety of metals and thicknesses when using the ____ welding process.

A weld is always ____________________ unless the welding symbol specifies a weld length and pitch.

Introduction to Engineering and Manufacturing Technology Print Reading

Communicating with a Sketch

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Multiviews

Reading Auxiliary Views

Manufacturing Materials and Processes

Reading Dimensions

Reading Prints With Fasteners and Springs

Reading Sections, Revolutions, and Conventional Breaks

Reading Geometric Dimensioning and Tolerancing

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Reading Prints of Working Drawings

Reading Prints of Pictorial Drawings

Reading Electrical Diagrams and Schematics

Filters

Exam 15: Welding Processes and Reading Welding Representations

The type of weld is associated with the weld shape and/or they type of groove to which the weld is applied.

The components of a welding symbol, the reference line, the leader, and the tail, must always be used.

Intermittent welds that have a pitch of 3 have 3 inches in between welds.

Associated with ____ applications are soldering, brazing, and braze welding.

Gas tungsten welding is sometimes called?

A welding symbol consists of a flange weld with three numbers associated with it. The first number is 1/8, the second number is 3/8, and they are connected by a "+". The third number, 3/32 is shown below the first two numbers. What does this symbol mean?

A J groove weld is to be made at a joint on the arrow side. The weld is to undergo a nondestructive radiographic test and the angle at which the test is to be made is 25° from vertical. Which of the following describes how this welding symbol will look?

Unless otherwise specified, a weld ___________________________________ the thickness of the parts at the joint.

The letter designating a flush contour weld is placed above the flush contour symbol for another side application, or below the flush contour symbol for an arrow side application.

The most traditionally used welding method is the shielded metal arc welding process.

If the weld is to be deposited on the arrow side of the joint, the proper weld symbol is placed above the reference line.

Gas tungsten arc welding is generally limited to thin materials, high integrity joints, or small parts.

Name the American Welding Society (AWS) standard for welding drafting practices developed in accordance with rules of the American National Standards Institute (ANSI), and published by the American Welding Society.

Describe the metric welding symbol practices such as those used in the British Standard.

Compression, bending, torsion, and shear are examples of the types of ____ used on welds.

Weld symbol indicates the type of weld and is part of the welding symbol.

____ are made in holes in a piece of metal that is lapped over another piece of metal.

High quality welds can be made rapidly with excellent uniformity on a wide variety of metals and thicknesses when using the ____ welding process.

A weld is always ____________________ unless the welding symbol specifies a weld length and pitch.

Introduction to Engineering and Manufacturing Technology Print Reading

Communicating with a Sketch

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Multiviews

Reading Auxiliary Views

Manufacturing Materials and Processes

Reading Dimensions

Reading Prints With Fasteners and Springs

Reading Sections, Revolutions, and Conventional Breaks

Reading Geometric Dimensioning and Tolerancing

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Reading Prints of Working Drawings

Reading Prints of Pictorial Drawings

Reading Electrical Diagrams and Schematics

Filters