Question 1

Discuss what you should do while you are in BIOS set up in order to make sure the setting are set to default while installing a motherboard.

Accepted Answer

Check the time and date.
Check the floppy drive type if you have one.
Make sure abbreviated POST is disabled.While you're installing a motherboard,you generally want it to do as many tests as possible.After you know the system is working,you can choose to abbreviate POST.
Set the boot order to the hard drive,and then a CD,if you will be booting the OS from the hard drive.
Make sure "autodetect hard disk" is set so that the system automatically looks for drives.
Leave everything else at their defaults unless you know that particular settings should be otherwise.
Save and exit.

Question 2

The slower end of the hub in the Intel i800 chipsets,called the ____,contains the I/O controller hub.

Accepted Answer

A) North Bridge 
B) North Gate 
C) South Hub 
D) South Bridge 
A) North Bridge 
B) North Gate 
C) South Hub 
D) South Bridge D

Question 3

The CMOS battery on the motherboard is considered a(n)____________________ replaceable unit.

Accepted Answer

field

Question 4

List and describe the four kinds of cargo that the embedded wires on the bottom of the motherboard carry.

Accepted Answer

Electrical power.Chips on the motherboar

Question 5

The ____ have a lever that is used to lift the processor up and out of the socket.

Accepted Answer

A) minimal insertion force sockets 
B) zero insertion force sockets 
C) zero effort sockets 
D) zero tolerance sockets 
A) minimal insertion force sockets 
B) zero insertion force sockets 
C) zero effort sockets 
D) zero tolerance sockets

Question 6

The motherboard configuration stored in BIOS setup needs to be changed when a new floppy drive is installed.

Accepted Answer

A) True 
 B)False

Question 7

Today's PCs have four or five buses,each with different speeds,access methods,and protocols.

Accepted Answer

A) True 
 B)False

Question 8

Match each term with the correct statement below.
-Key(s)to press during the boot process to access the Dell computers using Phoenix BIOS

Accepted Answer

A) LGA775 or Socket T 
B) F2 or F1 
C) LGA1366 or Socket B 
D) Socket 423 
E) boot sequence
F)Socket 478
G)Del
H)LGA771 or Socket J
I)Ctrl+Alt+Enter 
A) LGA775 or Socket T 
B) F2 or F1 
C) LGA1366 or Socket B 
D) Socket 423 
E) boot sequence
F)Socket 478
G)Del
H)LGA771 or Socket J
I)Ctrl+Alt+Enter

Question 9

Generally when shopping for a motherboard for a gaming system,you'd need to pay attention to form factor,processor sockets,chipsets,buses and number of bus slots,and other connectors,slots,and ports.

Accepted Answer

A) True 
 B)False

Question 10

Match each term with the correct statement below.
-Key(s)to press during the boot process to access the Newer Phoenix BIOS

Accepted Answer

A) LGA775 or Socket T 
B) F2 or F1 
C) LGA1366 or Socket B 
D) Socket 423 
E) boot sequence
F)Socket 478
G)Del
H)LGA771 or Socket J
I)Ctrl+Alt+Enter 
A) LGA775 or Socket T 
B) F2 or F1 
C) LGA1366 or Socket B 
D) Socket 423 
E) boot sequence
F)Socket 478
G)Del
H)LGA771 or Socket J
I)Ctrl+Alt+Enter

Question 11

At the beginning of the boot drive (usually drive C)is the OS ____ record.

Accepted Answer

A) loop 
B) boot 
C) strap 
D) master 
A) loop 
B) boot 
C) strap 
D) master

Question 12

Match each term with the correct statement below.
-Has 771 pins that touch pads on the processor

Accepted Answer

A) LGA775 or Socket T 
B) F2 or F1 
C) LGA1366 or Socket B 
D) Socket 423 
E) boot sequence
F)Socket 478
G)Del
H)LGA771 or Socket J
I)Ctrl+Alt+Enter 
A) LGA775 or Socket T 
B) F2 or F1 
C) LGA1366 or Socket B 
D) Socket 423 
E) boot sequence
F)Socket 478
G)Del
H)LGA771 or Socket J
I)Ctrl+Alt+Enter

Question 13

Discuss the value desktops.

Accepted Answer

The 910GL,845E,845G,and 865G chipsets su

Question 14

Access to a computer can be controlled using a ____ password.

Accepted Answer

A) generic 
B) general 
C) startup 
D) recover 
A) generic 
B) general 
C) startup 
D) recover

Question 15

A(n)____________________ is a command to the processor to wait for slower devices to catch up.

Accepted Answer

The answer of A(n)____________________ is a command to the processor...

Question 16

Match each term with the correct statement below.
-Key(s)to press during the boot process to access the AMI BIOS

Accepted Answer

A) LGA775 or Socket T 
B) F2 or F1 
C) LGA1366 or Socket B 
D) Socket 423 
E) boot sequence
F)Socket 478
G)Del
H)LGA771 or Socket J
I)Ctrl+Alt+Enter 
A) LGA775 or Socket T 
B) F2 or F1 
C) LGA1366 or Socket B 
D) Socket 423 
E) boot sequence
F)Socket 478
G)Del
H)LGA771 or Socket J
I)Ctrl+Alt+Enter

Question 17

The fast end of hub in the Intel i800 series chipsets,which contains the graphics and memory controller,connects to the system bus and is called the hub's ____.

Accepted Answer

A) North Bridge 
B) South Bridge 
C) Middle Bridge 
D) North Gate 
A) North Bridge 
B) South Bridge 
C) Middle Bridge 
D) North Gate

Question 18

Discuss the mainstream desktop chipsets.

Accepted Answer

The P45,P43,P35,G45,and G31 chipsets sup

Question 19

Earlier Pentiums used a ____ socket,with pins aligned in uniform rows around the socket.

Accepted Answer

A) ball grid array 
B) differential grid array 
C) pin socket array 
D) pin grid array 
A) ball grid array 
B) differential grid array 
C) pin socket array 
D) pin grid array

Question 20

Match each term with the correct statement below.
-Has a 39 x 39 SPGA grid

Accepted Answer

A) LGA775 or Socket T 
B) F2 or F1 
C) LGA1366 or Socket B 
D) Socket 423 
E) boot sequence
F)Socket 478
G)Del
H)LGA771 or Socket J
I)Ctrl+Alt+Enter 
A) LGA775 or Socket T 
B) F2 or F1 
C) LGA1366 or Socket B 
D) Socket 423 
E) boot sequence
F)Socket 478
G)Del
H)LGA771 or Socket J
I)Ctrl+Alt+Enter

Exam 5: All About Motherboards

Discuss what you should do while you are in BIOS set up in order to make sure the setting are set to default while installing a motherboard.

The slower end of the hub in the Intel i800 chipsets,called the ____,contains the I/O controller hub.

The CMOS battery on the motherboard is considered a(n)____________________ replaceable unit.

List and describe the four kinds of cargo that the embedded wires on the bottom of the motherboard carry.

The ____ have a lever that is used to lift the processor up and out of the socket.

The motherboard configuration stored in BIOS setup needs to be changed when a new floppy drive is installed.

Today's PCs have four or five buses,each with different speeds,access methods,and protocols.

Match each term with the correct statement below. -Key(s)to press during the boot process to access the Dell computers using Phoenix BIOS

Generally when shopping for a motherboard for a gaming system,you'd need to pay attention to form factor,processor sockets,chipsets,buses and number of bus slots,and other connectors,slots,and ports.

Match each term with the correct statement below. -Key(s)to press during the boot process to access the Newer Phoenix BIOS

At the beginning of the boot drive (usually drive C)is the OS ____ record.

Match each term with the correct statement below. -Has 771 pins that touch pads on the processor

Discuss the value desktops.

Access to a computer can be controlled using a ____ password.

A(n)____________________ is a command to the processor to wait for slower devices to catch up.

Match each term with the correct statement below. -Key(s)to press during the boot process to access the AMI BIOS

The fast end of hub in the Intel i800 series chipsets,which contains the graphics and memory controller,connects to the system bus and is called the hub's ____.

Discuss the mainstream desktop chipsets.

Earlier Pentiums used a ____ socket,with pins aligned in uniform rows around the socket.

Match each term with the correct statement below. -Has a 39 x 39 SPGA grid

Introducing Hardware

Introducing Operating Systems

Working With People in a Technical World

Form Factors, power Supplies, and Working Inside a Computer

Supporting Processors

Upgrading Memory

Supporting Hard Drives

Installing and Supporting Io Devices

Multimedia Devices and Mass Storage

PC Maintenance and Troubleshooting Strategies

Installing Windows

Maintaining Windows

Optimizing Windows

Tools for Solving Windows Problems

Fixing Windows Problems

Networking Essentials

Networking Practices

Security Essentials

Security Practices

Supporting Notebooks

Supporting Printers

Filters