Exam 10: Rotational Kinematics and Energy

arrow
  • Select Tags
search iconSearch Question
flashcardsStudy Flashcards
  • Select Tags

When a fan is turned off,its angular speed decreases from 10 rad/s to 6.3 rad/s in 5.0 s.What is the magnitude of the average angular acceleration of the fan?

(Multiple Choice)
4.9/5
(35)

A hoop with a mass of 2.75 kg is rolling without slipping along a horizontal surface with a speed of 4.5 m/s when it starts down a ramp that makes an angle of 25° below the horizontal.What is the rotational kinetic energy of the hoop after it has rolled 3.0 m down as measured along the surface of the ramp?

(Multiple Choice)
4.8/5
(34)

A pulley has an initial angular speed of 12.5 rad/s and a constant angular acceleration of 3.41 rad/s2.Through what angle does the pulley turn in 5.26 s?

(Multiple Choice)
4.9/5
(36)

A wheel accelerates from rest to A wheel accelerates from rest to   At a uniform rate of   Through what angle (in radians)did the wheel turn while accelerating? At a uniform rate of A wheel accelerates from rest to   At a uniform rate of   Through what angle (in radians)did the wheel turn while accelerating? Through what angle (in radians)did the wheel turn while accelerating?

(Multiple Choice)
4.9/5
(35)

At a certain instant,a compact disc is rotating at 210 rpm.What is its angular speed in rad/s?

(Multiple Choice)
4.9/5
(39)

An electrical motor spins at a constant An electrical motor spins at a constant   If the rotor radius is   What is the linear acceleration of the edge of the rotor? If the rotor radius is An electrical motor spins at a constant   If the rotor radius is   What is the linear acceleration of the edge of the rotor? What is the linear acceleration of the edge of the rotor?

(Multiple Choice)
4.9/5
(35)

A chicken is running in a circular path with an angular speed of 1.52 rad/s.How long does it take the chicken to complete one revolution?

(Multiple Choice)
4.7/5
(33)

What is the angular speed,in rad/s,of a flywheel turning at 813.0 rpm?

(Multiple Choice)
4.9/5
(42)

An old 78 rpm record rotates through an angle of 320° as it slows down uniformly from 78.0 rpm to 22.8 rpm.What is the magnitude of the angular acceleration of the record?

(Multiple Choice)
4.8/5
(36)

A solid uniform sphere of mass 120 kg and radius 1.7 m starts from rest and rolls without slipping down an inclined plane of vertical height 5.3 m.What is the angular speed of the sphere at the bottom of the inclined plane?

(Multiple Choice)
4.8/5
(30)

A potter's wheel has the shape of a solid uniform disk of mass A potter's wheel has the shape of a solid uniform disk of mass   And radius 0.65 m.It spins about an axis perpendicular to the disk at its center.A small 2.1 kg lump of very dense clay is dropped onto the wheel at a distance 0.41 m from the axis.What is the moment of inertia of the system about the axis of spin? And radius 0.65 m.It spins about an axis perpendicular to the disk at its center.A small 2.1 kg lump of very dense clay is dropped onto the wheel at a distance 0.41 m from the axis.What is the moment of inertia of the system about the axis of spin?

(Multiple Choice)
4.9/5
(41)

Two uniform solid balls,one of radius R and mass M,the other of radius 2R and mass 8M,roll down a high incline.They start together from rest at the top of the incline.Which one will reach the bottom of the incline first?

(Multiple Choice)
4.9/5
(44)

While spinning down from 500 rpm to rest,a flywheel does While spinning down from 500 rpm to rest,a flywheel does   Of work.This flywheel is in the shape of a solid uniform disk of radius 1.2 m.What is the mass of this flywheel? Of work.This flywheel is in the shape of a solid uniform disk of radius 1.2 m.What is the mass of this flywheel?

(Multiple Choice)
4.7/5
(39)

A child is riding a merry-go-round that has an instantaneous angular speed of 1.25 rad/s and an angular acceleration of 0.745 rad/s2.The child is standing 4.65 m from the center of the merry-go-round.What is the magnitude of the linear acceleration of the child?

(Multiple Choice)
5.0/5
(41)

To drive a typical car at 40 mph on a level road for one hour requires about 3.2 × 107 J of energy.Suppose we tried to store this much energy in a spinning,solid,uniform,cylindrical flywheel.A large flywheel cannot be spun too fast or it will fracture.If we used a flywheel of diameter 1.2 m and mass 400 kg,what angular speed would be required to store 3.2 × 107 J?

(Multiple Choice)
4.7/5
(44)

A rolling wheel of diameter of 68 cm slows down uniformly from 8.4 m/s to rest over a distance of 115 m.What is the magnitude of its angular acceleration if there was no slipping?

(Multiple Choice)
4.8/5
(40)

An Atwood machine consists of a mass of 3.5 kg connected by a light string to a mass of 6.0 kg over a frictionless pulley with a moment of inertia of 0.0352 kg ∙ m2 and a radius of 12.5 cm.If the system is released from rest,what is the speed of the masses after they have moved through 1.25 m if the string does not slip on the pulley?

(Multiple Choice)
4.7/5
(43)

A string is wound tightly around a fixed pulley having a radius of 5.0 cm.As the string is pulled,the pulley rotates without any slipping of the string.What is the angular speed of the pulley when the string is moving at 5.0 m/s?

(Multiple Choice)
4.9/5
(38)

A small uniform disk and a small uniform sphere are released simultaneously at the top of a high inclined plane,and they roll down without slipping.Which one will reach the bottom first?

(Multiple Choice)
4.8/5
(41)

A machinist turns on the power on to a grinding wheel at time t = 0 s.The wheel accelerates uniformly from rest for 10 s and reaches the operating angular speed of A machinist turns on the power on to a grinding wheel at time t = 0 s.The wheel accelerates uniformly from rest for 10 s and reaches the operating angular speed of   The wheel is run at that angular velocity for 40 s and then power is shut off.The wheel slows down uniformly at   Until the wheel stops.For how long a time after the power is shut off does it take the wheel to stop? The wheel is run at that angular velocity for 40 s and then power is shut off.The wheel slows down uniformly at A machinist turns on the power on to a grinding wheel at time t = 0 s.The wheel accelerates uniformly from rest for 10 s and reaches the operating angular speed of   The wheel is run at that angular velocity for 40 s and then power is shut off.The wheel slows down uniformly at   Until the wheel stops.For how long a time after the power is shut off does it take the wheel to stop? Until the wheel stops.For how long a time after the power is shut off does it take the wheel to stop?

(Multiple Choice)
4.8/5
(35)
Showing 21 - 40 of 60
close modal

Filters

  • Essay(0)
  • Multiple Choice(0)
  • Short Answer(0)
  • True False(0)
  • Matching(0)