Question 1

A master production schedule shows the following information:   Using a lot-for-lot rule, what is the MSP quantity for week 4?

Accepted Answer

A) 500 
B) 400 
C) 450 
D) 50 
A) 500 
B) 400 
C) 450 
D) 50

Question 2

A master production schedule shows the following information:   Based on the information in the MPS, what is the amount that is available to promise in week 4?

Accepted Answer

A) 1,200 
B) 700 
C) 500 
D) 1,500 
A) 1,200 
B) 700 
C) 500 
D) 1,500

Question 3

The following table shows capacity requirements data for making table tops.   Which of the following is TRUE?

Accepted Answer

A) Overtime is needed in day 1. 
B) Capacity exactly meets demand in day 5. 
C) All of the excess demand in days 4 and 5 can be shifted to day 3. 
D) New machines are needed. 
A) Overtime is needed in day 1. 
B) Capacity exactly meets demand in day 5. 
C) All of the excess demand in days 4 and 5 can be shifted to day 3. 
D) New machines are needed.

Question 4

The entire time period covered by the MPS is the:

Accepted Answer

A) Time bucket. 
B) Cumulative lead time. 
C) Planning horizon. 
D) Production schedule. 
A) Time bucket. 
B) Cumulative lead time. 
C) Planning horizon. 
D) Production schedule.

Question 5

A master production schedule shows the following information:   What is the available to promise for period 2?

Accepted Answer

A) 0. 
B) -20. 
C) 20. 
D) None of these. 
A) 0. 
B) -20. 
C) 20. 
D) None of these.

Question 6

The longest lead time path in the BOM is the:

Accepted Answer

A) Time bucket. 
B) Planning horizon. 
C) Time window. 
D) Cumulative lead time. 
A) Time bucket. 
B) Planning horizon. 
C) Time window. 
D) Cumulative lead time.

Question 7

Which of the following is NOT an input into the MRP?

Accepted Answer

A) Bill of materials 
B) Inventory records file 
C) Master production schedule 
D) Planned order release 
A) Bill of materials 
B) Inventory records file 
C) Master production schedule 
D) Planned order release

Question 8

The positioning and replenishment of finished goods inventories at the retail level can be determined using:

Accepted Answer

A) MRP. 
B) CRP. 
C) DRP. 
D) RFID. 
A) MRP. 
B) CRP. 
C) DRP. 
D) RFID.

Question 9

Which of the following is NOT an input to an MRP system?

Accepted Answer

A) Order releases. 
B) Actual orders. 
C) Inventory receipts. 
D) Bill of materials. 
A) Order releases. 
B) Actual orders. 
C) Inventory receipts. 
D) Bill of materials.

Question 10

If the planning horizon is 12 weeks, the cumulative lead time must be:

Accepted Answer

A) Greater than 12 weeks. 
B) Exactly equal to 12 weeks. 
C) Greater than 6 weeks. 
D) Less than or equal to 12 weeks. 
A) Greater than 12 weeks. 
B) Exactly equal to 12 weeks. 
C) Greater than 6 weeks. 
D) Less than or equal to 12 weeks.

Question 11

Benefits of ERP systems include all of the following EXCEPT:

Accepted Answer

A) Easy implementation. 
B) Fewer data entry errors. 
C) More informed business decisions. 
D) Improved customer service. 
A) Easy implementation. 
B) Fewer data entry errors. 
C) More informed business decisions. 
D) Improved customer service.

Question 12

Advanced planning and scheduling systems:

Accepted Answer

A) Use a simpler logic than the logic used in MRP. 
B) Consolidate all business planning systems and data throughout an organization. 
C) Integrate materials and capacity planning into one system. 
D) All of these. 
A) Use a simpler logic than the logic used in MRP. 
B) Consolidate all business planning systems and data throughout an organization. 
C) Integrate materials and capacity planning into one system. 
D) All of these.

Question 13

A company has decided to outsource the production of key components for its main product to suppliers.What affect will this have on the product's bill of materials?

Accepted Answer

A) None. 
B) The bill of materials will be wider. 
C) The bill of materials will be deeper. 
D) The bill of materials will be flatter. 
A) None. 
B) The bill of materials will be wider. 
C) The bill of materials will be deeper. 
D) The bill of materials will be flatter.

Question 14

An MRP Schedule is as follows.What are the net requirements in Week 2?

Accepted Answer

A) 0. 
B) 20 units. 
C) 30 units. 
D) 50 units. 
A) 0. 
B) 20 units. 
C) 30 units. 
D) 50 units.

Question 15

A master production schedule shows the beginning inventory is 50 units, the forecast is 200 units and actual customer orders are 220 units.What is the quantity that is available to promise in period 1?

Accepted Answer

A) 50 
B) 150 
C) 170 
D) 0 
A) 50 
B) 150 
C) 170 
D) 0

Question 16

End item A is made by assembling 2 of part B and 3 of part C.Part C is made from 2 of component D and 2 of component E.Component D is considered to be a:

Accepted Answer

A) Level 0. 
B) Level 1 input. 
C) Level 2 input. 
D) Level 3 input. 
A) Level 0. 
B) Level 1 input. 
C) Level 2 input. 
D) Level 3 input.

Question 17

Which of the following is NOT included in the information about the inventory records file for an item?

Accepted Answer

A) Safety stock 
B) Preferred order quantity 
C) Net requirements 
D) Lead time 
A) Safety stock 
B) Preferred order quantity 
C) Net requirements 
D) Lead time

Question 18

An end item A is made by assembling 4 of component B and 1 of component C.Component B is made from 2 of part D and 4 of part E.Within the bill of materials, component B is considered to be

Accepted Answer

A) Level 0. 
B) Level 1. 
C) Level 2. 
A) Level 0. 
B) Level 1. 
C) Level 2.

Question 19

Using the BOM, if 2 units of A are needed, how many used of K will be required? Assume that there is no on-hand inventory of any items.

Accepted Answer

A) 16 
B) 34 
C) 52 
D) 104 
A) 16 
B) 34 
C) 52 
D) 104

Question 20

A detailed description of an "end item" along with a list of all of its raw materials, parts, and subassemblies is shown in a:

Accepted Answer

A) MPS 
B) Planning horizon. 
C) BOM. 
D) DRP. 
A) MPS 
B) Planning horizon. 
C) BOM. 
D) DRP.

A master production schedule shows the following information: Using a lot-for-lot rule, what is the MSP quantity for week 4?

A master production schedule shows the following information: Based on the information in the MPS, what is the amount that is available to promise in week 4?

The following table shows capacity requirements data for making table tops. Which of the following is TRUE?

The entire time period covered by the MPS is the:

A master production schedule shows the following information: What is the available to promise for period 2?

The longest lead time path in the BOM is the:

Which of the following is NOT an input into the MRP?

The positioning and replenishment of finished goods inventories at the retail level can be determined using:

Which of the following is NOT an input to an MRP system?

If the planning horizon is 12 weeks, the cumulative lead time must be:

Benefits of ERP systems include all of the following EXCEPT:

Advanced planning and scheduling systems:

A company has decided to outsource the production of key components for its main product to suppliers.What affect will this have on the product's bill of materials?

An MRP Schedule is as follows.What are the net requirements in Week 2?

A master production schedule shows the beginning inventory is 50 units, the forecast is 200 units and actual customer orders are 220 units.What is the quantity that is available to promise in period 1?

End item A is made by assembling 2 of part B and 3 of part C.Part C is made from 2 of component D and 2 of component E.Component D is considered to be a:

Which of the following is NOT included in the information about the inventory records file for an item?

An end item A is made by assembling 4 of component B and 1 of component C.Component B is made from 2 of part D and 4 of part E.Within the bill of materials, component B is considered to be

Using the BOM, if 2 units of A are needed, how many used of K will be required? Assume that there is no on-hand inventory of any items.

A detailed description of an "end item" along with a list of all of its raw materials, parts, and subassemblies is shown in a:

Introduction to Managing Operations Across the Supply Chain

Operations and Supply Chain Strategy

Managing Processes and Capacity

Product Process Innovation

Manufacturing and Service Process Structures

Managing Quality

Managing Inventories

Lean Systems

Customer Service Management

Sourcing and Supply Management

Logistics Management

Demand Planning: Forecasting and Demand Management

Materials and Resource Requirements Planning

Project Management

Sustainable Operations Management preparing for the Future

Process Mapping and Analysis

Quality Improvement Tools

Advanced Methods for Project Scheduling

Filters

Exam 13: Sales and Operations Planning

A master production schedule shows the following information: Using a lot-for-lot rule, what is the MSP quantity for week 4?

A master production schedule shows the following information: Based on the information in the MPS, what is the amount that is available to promise in week 4?

The following table shows capacity requirements data for making table tops. Which of the following is TRUE?

The entire time period covered by the MPS is the:

A master production schedule shows the following information: What is the available to promise for period 2?

The longest lead time path in the BOM is the:

Which of the following is NOT an input into the MRP?

The positioning and replenishment of finished goods inventories at the retail level can be determined using:

Which of the following is NOT an input to an MRP system?

If the planning horizon is 12 weeks, the cumulative lead time must be:

Benefits of ERP systems include all of the following EXCEPT:

Advanced planning and scheduling systems:

A company has decided to outsource the production of key components for its main product to suppliers.What affect will this have on the product's bill of materials?

An MRP Schedule is as follows.What are the net requirements in Week 2?

A master production schedule shows the beginning inventory is 50 units, the forecast is 200 units and actual customer orders are 220 units.What is the quantity that is available to promise in period 1?

End item A is made by assembling 2 of part B and 3 of part C.Part C is made from 2 of component D and 2 of component E.Component D is considered to be a:

Which of the following is NOT included in the information about the inventory records file for an item?

An end item A is made by assembling 4 of component B and 1 of component C.Component B is made from 2 of part D and 4 of part E.Within the bill of materials, component B is considered to be

Using the BOM, if 2 units of A are needed, how many used of K will be required? Assume that there is no on-hand inventory of any items.

A detailed description of an "end item" along with a list of all of its raw materials, parts, and subassemblies is shown in a:

Introduction to Managing Operations Across the Supply Chain

Operations and Supply Chain Strategy

Managing Processes and Capacity

Product Process Innovation

Manufacturing and Service Process Structures

Managing Quality

Managing Inventories

Lean Systems

Customer Service Management

Sourcing and Supply Management

Logistics Management

Demand Planning: Forecasting and Demand Management

Materials and Resource Requirements Planning

Project Management

Sustainable Operations Management preparing for the Future

Process Mapping and Analysis

Quality Improvement Tools

Advanced Methods for Project Scheduling

Filters