Exam 14: Statistical Applications in Quality Management

TABLE 14-7 A supplier of silicone sheets for producers of computer chips wants to evaluate her manufacturing process. She takes samples of size 5 from each day's output and counts the number of blemishes on each silicone sheet. The results from 20 days of such evaluations are presented below. She also decides that the upper specification limit is 10 blemishes. -Referring to Table 14-7, an chart is to be used for the number of blemishes. One way to obtain the control limits is to take the grand mean and add and subtract the product of A₂ times the mean of the sample ranges. For this data set, the value of A₂ is ________.

________ causes of variation are correctable without modifying the system.

TABLE 14-2 A political pollster randomly selects a sample of 100 voters each day for 8 successive days and asks how many will vote for the incumbent. The pollster wishes to construct a p chart to see if the percentage favoring the incumbent candidate is too erratic. -Referring to Table 14-2, what is the numerical value of the lower control limit for the p chart?

TABLE 14-9 The manufacturer of canned food constructed control charts and analyzed several quality characteristics. One characteristic of interest is the weight of the filled cans. The lower specification limit for weight is 2.95 pounds. The table below provides the range and mean of the weights of five cans tested every fifteen minutes during a day's production. -Referring to Table 14-9, an R chart is to be constructed for the weight. The lower control limit for this data set is ________.

TABLE 14-7 A supplier of silicone sheets for producers of computer chips wants to evaluate her manufacturing process. She takes samples of size 5 from each day's output and counts the number of blemishes on each silicone sheet. The results from 20 days of such evaluations are presented below. She also decides that the upper specification limit is 10 blemishes. -Referring to Table 14-7, an R chart is to be constructed for the number of blemishes. The lower control limit for this data set is ________.

TABLE 14-8 Recently, a university switched to a new type of computer-based registration. The registrar is concerned with the amount of time students are spending on the computer registering under the new system. She decides to randomly select 8 students on each of the 12 days of the registration and determine the time each spends on the computer registering. The range, mean, and standard deviation of the times required to register are in the table that follows. -Developing operational definitions for each critical-to-quality characteristic involves which part of the DMAIC process?

TABLE 14-9 The manufacturer of canned food constructed control charts and analyzed several quality characteristics. One characteristic of interest is the weight of the filled cans. The lower specification limit for weight is 2.95 pounds. The table below provides the range and mean of the weights of five cans tested every fifteen minutes during a day's production. -Referring to Table 14-9, an R chart is to be constructed for the weight. The center line of this R chart is located at ________.

TABLE 14-8 Recently, a university switched to a new type of computer-based registration. The registrar is concerned with the amount of time students are spending on the computer registering under the new system. She decides to randomly select 8 students on each of the 12 days of the registration and determine the time each spends on the computer registering. The range, mean, and standard deviation of the times required to register are in the table that follows. -Referring to Table 14-8, based on the chart, it appears that the process is in control.

TABLE 14-9 The manufacturer of canned food constructed control charts and analyzed several quality characteristics. One characteristic of interest is the weight of the filled cans. The lower specification limit for weight is 2.95 pounds. The table below provides the range and mean of the weights of five cans tested every fifteen minutes during a day's production. -The Shewhart-Deming cycle plays an important role in which of the following Deming's 14 points for management?

TABLE 14-9 The manufacturer of canned food constructed control charts and analyzed several quality characteristics. One characteristic of interest is the weight of the filled cans. The lower specification limit for weight is 2.95 pounds. The table below provides the range and mean of the weights of five cans tested every fifteen minutes during a day's production. -Referring to Table 14-9, an R chart is to be constructed for the weight. The upper control limit for this data set is ________.

TABLE 14-7 A supplier of silicone sheets for producers of computer chips wants to evaluate her manufacturing process. She takes samples of size 5 from each day's output and counts the number of blemishes on each silicone sheet. The results from 20 days of such evaluations are presented below. She also decides that the upper specification limit is 10 blemishes. -Referring to Table 14-7, an R chart is to be constructed for the number of blemishes. One way to create the upper control limit involves multiplying the mean of the sample ranges by D₄. For this data set, the value of D₄ is ________.

TABLE 14-5 A manufacturer of computer disks took samples of 240 disks on 15 consecutive days. The number of disks with bad sectors was determined for each of these samples. The results are in the table that follows. -Referring to Table 14-5, construct a p control chart for these data.

TABLE 14-4 A factory supervisor is concerned that the time it takes workers to complete an important production task (measured in seconds) is too erratic and adversely affects expected profits. The supervisor proceeds by randomly sampling 5 individuals per hour for a period of 10 hours. The sample mean and range for each hour are listed below. She also decides that lower and upper specification limit for the critical-to-quality variable should be 10 and 30 seconds, respectively. -Referring to Table 14-4, suppose the supervisor constructs an R chart to see if the variability in collection times is in control. This R chart is characterized by which of the following?

TABLE 14-4 A factory supervisor is concerned that the time it takes workers to complete an important production task (measured in seconds) is too erratic and adversely affects expected profits. The supervisor proceeds by randomly sampling 5 individuals per hour for a period of 10 hours. The sample mean and range for each hour are listed below. She also decides that lower and upper specification limit for the critical-to-quality variable should be 10 and 30 seconds, respectively. -Referring to Table 14-4, suppose the supervisor constructs an R chart to see if the variability in collection times is in control. What is the center line of this R chart?

TABLE 14-7 A supplier of silicone sheets for producers of computer chips wants to evaluate her manufacturing process. She takes samples of size 5 from each day's output and counts the number of blemishes on each silicone sheet. The results from 20 days of such evaluations are presented below. She also decides that the upper specification limit is 10 blemishes. -Referring to Table 14-7, an chart is to be used for the number of blemishes. The lower control limit for this data set is ________, while the upper control limit is ________.

TABLE 14-9 The manufacturer of canned food constructed control charts and analyzed several quality characteristics. One characteristic of interest is the weight of the filled cans. The lower specification limit for weight is 2.95 pounds. The table below provides the range and mean of the weights of five cans tested every fifteen minutes during a day's production. -Referring to Table 14-9, an chart is to be used for the weight. The lower control limit for this data set is ________, while the upper control limit is ________.

Once the control limits are set for a control chart, one attempts to

TABLE 14-8 Recently, a university switched to a new type of computer-based registration. The registrar is concerned with the amount of time students are spending on the computer registering under the new system. She decides to randomly select 8 students on each of the 12 days of the registration and determine the time each spends on the computer registering. The range, mean, and standard deviation of the times required to register are in the table that follows. -Referring to Table 14-8, construct an R chart for the time required to register.

TABLE 14- 1 A local newspaper has 10 delivery boys who each deliver the morning paper to 50 customers every day. The owner decides to record the number of papers delivered on time for a 10-day period for one of the delivery boys and construct a p chart to see whether the percentage is too erratic. Number of Papers -Referring to Table 14-1, what is the numerical value of the lower control limit for the p chart?

TABLE 14-8 Recently, a university switched to a new type of computer-based registration. The registrar is concerned with the amount of time students are spending on the computer registering under the new system. She decides to randomly select 8 students on each of the 12 days of the registration and determine the time each spends on the computer registering. The range, mean, and standard deviation of the times required to register are in the table that follows. -Which of the following is not part of the DMAIC process in Six Sigma management?