Question 1

Manually configuring a driver using the Ethernet devices driver can be used to display only the desired Ethernet/IP devices in RSWho.

Accepted Answer

A) True 
 B)False  True

Question 2

After a driver has been configured, open the ____________________ window to verify communication has been established with the target device.

Accepted Answer

RSWho

Question 3

Suppose a yellow question mark and text stating unrecognized device are displayed in the RSWho window. Briefly describe the problem and how it can likely be resolved.

Accepted Answer

In most situations where the question mark is displayed, RSLinx has identified a device on the network at the address displayed; however, RSLinx does not know (recognize) the device. Most likely the problem here is that the firmware of the Ethernet communications module is newer than the current revision of RSLinx software can recognize. Updating RSLinx to the latest software version typically takes care of the problem. Also check for proper configuration.

Question 4

An RSLinx driver can be deleted at any time and reconfigured to resolve problems with the driver.

Accepted Answer

A) True 
 B)False

Question 5

In the Configure Drivers window, the word "running" listed twice for a configured driver verifies communication with the target device.

Accepted Answer

A) True 
 B)False

Question 6

In the Configure Drivers window, the driver that can only be used to configure modules such as 1756-ENBT, EN2T, EN2F, or newer modules is the ____________________ driver.

Accepted Answer

The answer of In the Configure Drivers window, the driver...

Question 7

When configuring a driver for a ControlLogix Ethernet module, suppose the personal computer IP address is not available as a selection as an Ethernet interface. What are two checks that can be performed?

Accepted Answer

If your personal computer's IP address i

Question 8

What steps can be taken if the word "running" is not listed twice for a configured Ethernet driver in the Configure Drivers window?

Accepted Answer

If something other than Running is being

Question 9

If desired, the default driver name provided by RSLinx during configuration can be changed in the RSWho window.

Accepted Answer

A) True 
 B)False

Question 10

The 1756-ENBT Ethernet driver must be configured prior to configuring the personal computer with which communication is desired.

Accepted Answer

A) True 
 B)False

Question 11

One feature of the newer Ethernet/IP driver is that RSLinx browses the local subnet, automatically finds devices with compatible IP addresses, and then finishes configuring the driver for you.

Accepted Answer

A) True 
 B)False

Question 12

If communication was lost between your computer and the Ethernet communications module after the driver has been successfully configured, an X will display on top of the module's icon.

Accepted Answer

A) True 
 B)False

Question 13

In the event of a failed attempt to configure a driver for an Ethernet module, what is a simple error that may have occurred?

Accepted Answer

A failed attempt to configure the driver

Question 14

The older ____________________ driver can be used to configure most Ethernet modules; however, it is typically used for the 1756-ENET module.

Accepted Answer

The answer of The older ____________________ driver can be used...

Question 15

When configuring a 1756-ENBT Ethernet driver using RSLinx, select an Ethernet crossover cable to connect the module and the personal computer.

Accepted Answer

A) True 
 B)False

Exam 27: Configuring Ethernet-Ip Drivers Using Rs Linx Software

Manually configuring a driver using the Ethernet devices driver can be used to display only the desired Ethernet/IP devices in RSWho.

After a driver has been configured, open the ____________________ window to verify communication has been established with the target device.

Suppose a yellow question mark and text stating unrecognized device are displayed in the RSWho window. Briefly describe the problem and how it can likely be resolved.

An RSLinx driver can be deleted at any time and reconfigured to resolve problems with the driver.

In the Configure Drivers window, the word "running" listed twice for a configured driver verifies communication with the target device.

In the Configure Drivers window, the driver that can only be used to configure modules such as 1756-ENBT, EN2T, EN2F, or newer modules is the ____________________ driver.

When configuring a driver for a ControlLogix Ethernet module, suppose the personal computer IP address is not available as a selection as an Ethernet interface. What are two checks that can be performed?

What steps can be taken if the word "running" is not listed twice for a configured Ethernet driver in the Configure Drivers window?

If desired, the default driver name provided by RSLinx during configuration can be changed in the RSWho window.

The 1756-ENBT Ethernet driver must be configured prior to configuring the personal computer with which communication is desired.

One feature of the newer Ethernet/IP driver is that RSLinx browses the local subnet, automatically finds devices with compatible IP addresses, and then finishes configuring the driver for you.

If communication was lost between your computer and the Ethernet communications module after the driver has been successfully configured, an X will display on top of the module's icon.

In the event of a failed attempt to configure a driver for an Ethernet module, what is a simple error that may have occurred?

The older ____________________ driver can be used to configure most Ethernet modules; however, it is typically used for the 1756-ENET module.

When configuring a 1756-ENBT Ethernet driver using RSLinx, select an Ethernet crossover cable to connect the module and the personal computer.

Introduction to Control Logix Hardware

Introduction to Rs Logix 5000 Software

Number Systems

Rs Logix 5000 Project Organization

Understanding Control Logix I-O Addressing

Modular Controllogix Digital and Analog I-O Configuration

Compactlogix I-O Configuration

Communicating Between Your Personal Computer and Your Plc

Creating and Monitoring Rs Logix 5000 Tags

Introduction to Logic

The Basic Relay Instructions

Controllogix Timer Instructions

Adding Ladder Rung Documentation

Control Logix Counter Instructions

Comparison Instructions

Data-Handling Instructions

Introduction to the Get System Values Gsv and Set Systems Values Ssv Instructions

Introduction to the Rs Logix 5000 Function Block Programming Language

Configuring a Serial Driver Using Rs Linx

Configuring the Keyspan by Tripp Lite, High-Speed Usb to Serial Adapter Model Usa-19hs

Configuring an Rslinx Serial Driver Using a Rockwell Automation 9300-Usbs Usb to Serial Adapter

Installing and Configuring a Usb Driver for 1756-L7 Series Controllers

Determining and Modifying a Personal Computers Ip Address

Configuring 1756 Control Logix Modular Ethernet Hardware

Configuring the Ethernet Ip Address for a Compact Logix 1769-L23e, 1769-L32e, or 1769-L35e

Configuring a 1756-Enet Ethernet Driver Using Rs Linx

Configuring a Compact Logix 1769-L23e, 1769-L32e, or 1769-L35e Ethernet-Ip Driver Using Rslinx

Configuring a Usb Driver for a 1756-En2t Ethernet Communications Module

Filters