Question 1

What are four general options for setting up ownership in the I/O configuration?

Accepted Answer

The options for setting up ownership in the I/O configuration include:
1. This controller has the module in its I/O configuration. This controller is the owner.
2. This controller has the module in its I/O configuration. This controller is not the owner and has a listen only connection.
3. This controller has the module in its I/O configuration, and the module is inhibited in the I/O configuration.
4. This controller does not have the module in the I/O configuration.

Question 2

Using RSLogix 5000 software, why is configuring I/O modules a manual process rather than having a "read I/O configuration feature" as found in RSLogix 500 software?

Accepted Answer

Because there are many options when configuring I/O modules, the process is manual so as to provide programming individuals the opportunity to configure their systems to their exact specifications.

Question 3

When beginning the I/O configuration process, what are three methods for selecting the module in the Select Module window?

Accepted Answer

First, you can select the module type from the By Category tab.
Second, you can select the By Vendor tab to select by manufacturer.
The third option is to select the module using the Favorites tab.

Question 4

In an error code,e.g., 16#0106, the 16# signifies that the radix of the error code is octal.

Accepted Answer

A) True 
 B)False

Question 5

The conversion of the analog incoming signal to the initial value stored in the module is called the ____________________ data.

Accepted Answer

The answer of The conversion of the analog incoming signal...

Question 6

In setting up a module's properties, the time period entry for output information to be sent from the output tags to this output module is known as the ____________________.

Accepted Answer

requested packet int

Question 7

Briefly explain what occurs when a project is downloaded into the controller and the controller is put into Run mode.

Accepted Answer

When a project is downloaded into the co

Question 8

____________________ output modules have the ability to determine the actual state of the output point when the point is commanded to be on.

Accepted Answer

The answer of ____________________ output modules have the ability to...

Question 9

An output module may have multiple owners, whereas an input module can only have one owner.

Accepted Answer

A) True 
 B)False

Question 10

When selecting electronic keying, a user needs to determine how closely matched a module replacement must be to the original part number, manufacturer, and major and minor revision. What are the three choices?

Accepted Answer

There are three choi

Question 11

Latch diagnostics can be cleared directly using a ladder logic clear instruction.

Accepted Answer

A) True 
 B)False

Question 12

When an integer format is selected, scaling of the outputs is not configurable in the I/O configuration.

Accepted Answer

A) True 
 B)False

Question 13

The ____________________ controller holds the I/O configuration for each module it owns.

Accepted Answer

The answer of The ____________________ controller holds the I/O configuration...

Question 14

Until the modules are configured, no I/O tags are available in the monitor or edit tags views of the controller scoped tags collection.

Accepted Answer

A) True 
 B)False

Question 15

Inhibiting a module is typically used during startups or ____________________.

Accepted Answer

The answer of Inhibiting a module is typically used during...

Exam 6: Modular Controllogix Digital and Analog I-O Configuration

What are four general options for setting up ownership in the I/O configuration?

Using RSLogix 5000 software, why is configuring I/O modules a manual process rather than having a "read I/O configuration feature" as found in RSLogix 500 software?

When beginning the I/O configuration process, what are three methods for selecting the module in the Select Module window?

In an error code,e.g., 16#0106, the 16# signifies that the radix of the error code is octal.

The conversion of the analog incoming signal to the initial value stored in the module is called the ____________________ data.

In setting up a module's properties, the time period entry for output information to be sent from the output tags to this output module is known as the ____________________.

Briefly explain what occurs when a project is downloaded into the controller and the controller is put into Run mode.

____________________ output modules have the ability to determine the actual state of the output point when the point is commanded to be on.

An output module may have multiple owners, whereas an input module can only have one owner.

When selecting electronic keying, a user needs to determine how closely matched a module replacement must be to the original part number, manufacturer, and major and minor revision. What are the three choices?

Latch diagnostics can be cleared directly using a ladder logic clear instruction.

When an integer format is selected, scaling of the outputs is not configurable in the I/O configuration.

The ____________________ controller holds the I/O configuration for each module it owns.

Until the modules are configured, no I/O tags are available in the monitor or edit tags views of the controller scoped tags collection.

Inhibiting a module is typically used during startups or ____________________.

Introduction to Control Logix Hardware

Introduction to Rs Logix 5000 Software

Number Systems

Rs Logix 5000 Project Organization

Understanding Control Logix I-O Addressing

Compactlogix I-O Configuration

Communicating Between Your Personal Computer and Your Plc

Creating and Monitoring Rs Logix 5000 Tags

Introduction to Logic

The Basic Relay Instructions

Controllogix Timer Instructions

Adding Ladder Rung Documentation

Control Logix Counter Instructions

Comparison Instructions

Data-Handling Instructions

Introduction to the Get System Values Gsv and Set Systems Values Ssv Instructions

Introduction to the Rs Logix 5000 Function Block Programming Language

Configuring a Serial Driver Using Rs Linx

Configuring the Keyspan by Tripp Lite, High-Speed Usb to Serial Adapter Model Usa-19hs

Configuring an Rslinx Serial Driver Using a Rockwell Automation 9300-Usbs Usb to Serial Adapter

Installing and Configuring a Usb Driver for 1756-L7 Series Controllers

Determining and Modifying a Personal Computers Ip Address

Configuring 1756 Control Logix Modular Ethernet Hardware

Configuring the Ethernet Ip Address for a Compact Logix 1769-L23e, 1769-L32e, or 1769-L35e

Configuring a 1756-Enet Ethernet Driver Using Rs Linx

Configuring Ethernet-Ip Drivers Using Rs Linx Software

Configuring a Compact Logix 1769-L23e, 1769-L32e, or 1769-L35e Ethernet-Ip Driver Using Rslinx

Configuring a Usb Driver for a 1756-En2t Ethernet Communications Module

Filters