Question 1

Distinguish between a major fault and a minor fault.

Accepted Answer

A major fault places the controller in fault mode. The controller stops and real-world outputs are put in their fault mode or program state mode, depending on the type of fault, as defined in the module's I/O configuration. A minor fault only sets a bit, and the controller continues to run.

Question 2

The number of Instance Name selections depends upon the specific class name selected when programming the instruction.

Accepted Answer

A) True 
 B)False  True

Question 3

To research the GSV instruction and the LASTSCANTIME attribute, use the RSLogix 5000 ____________________ screens

Accepted Answer

help

Question 4

When programming, the GSV instruction can be selected from the I/O tab on the ____________________ toolbar.

Accepted Answer

The answer of When programming, the GSV instruction can be...

Question 5

If the attribute being programmed for the GSV or SSV instruction pertains to the specific task, program, or routine in which the instruction is programmed, the word CURRENT can be selected as the Instance Name.

Accepted Answer

A) True 
 B)False

Question 6

The specific information that is sent to or received from the controller is called the ____________________.

Accepted Answer

The answer of The specific information that is sent to...

Question 7

The available GSV and SSV objects are related to software revision and hardware firmware level.

Accepted Answer

A) True 
 B)False

Question 8

A Get System Value, or GSV, instruction is programmed to get the desired information from the Rockwell Automation PLC 5 controller.

Accepted Answer

A) True 
 B)False

Question 9

If dissimilar data types are to be stored together as a block or structure, a(n) ____________________ should be created.

Accepted Answer

user-defined data type
user de

Question 10

List two possible causes of an instruction execution problem (type 4 fault).

Accepted Answer

An instruction execu

Question 11

When a fault is declared, ControlLogix provides two tags of information for fault identification: the fault type and fault code.

Accepted Answer

A) True 
 B)False

Question 12

When an SSV instruction is programmed, the source of the information to be sent to the controller is created by the programmer to match the size and layout as described in the instruction ____________________.

Accepted Answer

The answer of When an SSV instruction is programmed, the...

Question 13

List the three source or destination data types used with the GSV and SSV instructions.

Accepted Answer

One of the parameters to program for a G

Question 14

What is the data type requirement for arrays?

Accepted Answer

All data grouped tog

Question 15

When using the GSV instruction, what occurs if the size of the source and destination do not match?

Accepted Answer

If the size of the source and

Exam 17: Introduction to the Get System Values Gsv and Set Systems Values Ssv Instructions

Distinguish between a major fault and a minor fault.

The number of Instance Name selections depends upon the specific class name selected when programming the instruction.

To research the GSV instruction and the LASTSCANTIME attribute, use the RSLogix 5000 ____________________ screens

When programming, the GSV instruction can be selected from the I/O tab on the ____________________ toolbar.

If the attribute being programmed for the GSV or SSV instruction pertains to the specific task, program, or routine in which the instruction is programmed, the word CURRENT can be selected as the Instance Name.

The specific information that is sent to or received from the controller is called the ____________________.

The available GSV and SSV objects are related to software revision and hardware firmware level.

A Get System Value, or GSV, instruction is programmed to get the desired information from the Rockwell Automation PLC 5 controller.

If dissimilar data types are to be stored together as a block or structure, a(n) ____________________ should be created.

List two possible causes of an instruction execution problem (type 4 fault).

When a fault is declared, ControlLogix provides two tags of information for fault identification: the fault type and fault code.

When an SSV instruction is programmed, the source of the information to be sent to the controller is created by the programmer to match the size and layout as described in the instruction ____________________.

List the three source or destination data types used with the GSV and SSV instructions.

What is the data type requirement for arrays?

When using the GSV instruction, what occurs if the size of the source and destination do not match?

Introduction to Control Logix Hardware

Introduction to Rs Logix 5000 Software

Number Systems

Rs Logix 5000 Project Organization

Understanding Control Logix I-O Addressing

Modular Controllogix Digital and Analog I-O Configuration

Compactlogix I-O Configuration

Communicating Between Your Personal Computer and Your Plc

Creating and Monitoring Rs Logix 5000 Tags

Introduction to Logic

The Basic Relay Instructions

Controllogix Timer Instructions

Adding Ladder Rung Documentation

Control Logix Counter Instructions

Comparison Instructions

Data-Handling Instructions

Introduction to the Rs Logix 5000 Function Block Programming Language

Configuring a Serial Driver Using Rs Linx

Configuring the Keyspan by Tripp Lite, High-Speed Usb to Serial Adapter Model Usa-19hs

Configuring an Rslinx Serial Driver Using a Rockwell Automation 9300-Usbs Usb to Serial Adapter

Installing and Configuring a Usb Driver for 1756-L7 Series Controllers

Determining and Modifying a Personal Computers Ip Address

Configuring 1756 Control Logix Modular Ethernet Hardware

Configuring the Ethernet Ip Address for a Compact Logix 1769-L23e, 1769-L32e, or 1769-L35e

Configuring a 1756-Enet Ethernet Driver Using Rs Linx

Configuring Ethernet-Ip Drivers Using Rs Linx Software

Configuring a Compact Logix 1769-L23e, 1769-L32e, or 1769-L35e Ethernet-Ip Driver Using Rslinx

Configuring a Usb Driver for a 1756-En2t Ethernet Communications Module

Filters