Question 1

In the Configure Drivers window, the word "running" listed twice for a configured driver verifies communication with the target device.

Accepted Answer

A) True 
 B)False  False

Question 2

In regard to communication problems, what actions can be taken if the 1756-ENET Ethernet module is currently unrecognized?

Accepted Answer

If the 1756-ENET Ethernet module is currently unrecognized:
1. Verify that the personal computer and the Ethernet module have compatible IP addresses.
2. Make sure the RSLinx driver is correctly configured. The driver may need to be deleted and reconfigured.

Question 3

When configuring a 1756-ENET Ethernet driver using RSLinx, enter the IP address of the 1756-ENET module in the Configure Driver window; do not enter the IP address of the personal computer.

Accepted Answer

A) True 
 B)False  True

Question 4

In the Add New RSLinx Classic Driver window, the best option is to accept the default driver name.

Accepted Answer

A) True 
 B)False

Question 5

What steps can be taken if the word "running" is not listed twice for a configured 1756-ENET Ethernet driver in the Configure Drivers window?

Accepted Answer

If something other than Running is being

Question 6

To configure a driver for the 1756-ENET or to manually configure the newer modules, select the ____________________ driver in the Configure Drivers window.

Accepted Answer

The answer of To configure a driver for the 1756-ENET...

Question 7

After a driver has been configured, open the ____________________ window to verify communication has been established with the target device.

Accepted Answer

The answer of After a driver has been configured, open...

Question 8

When configuring a 1756-ENET Ethernet driver using RSLinx, select a dummy modem cable to connect the module and the personal computer.

Accepted Answer

A) True 
 B)False

Question 9

The 1756-ENET Ethernet driver must be configured prior to configuring the personal computer with which communication is desired.

Accepted Answer

A) True 
 B)False

Question 10

In the Configure Drivers window, the driver that can only be used to configure modules newer than the 1756-ENET is the ____________________ driver.

Accepted Answer

The answer of In the Configure Drivers window, the driver...

In the Configure Drivers window, the word "running" listed twice for a configured driver verifies communication with the target device.

In regard to communication problems, what actions can be taken if the 1756-ENET Ethernet module is currently unrecognized?

When configuring a 1756-ENET Ethernet driver using RSLinx, enter the IP address of the 1756-ENET module in the Configure Driver window; do not enter the IP address of the personal computer.

In the Add New RSLinx Classic Driver window, the best option is to accept the default driver name.

What steps can be taken if the word "running" is not listed twice for a configured 1756-ENET Ethernet driver in the Configure Drivers window?

To configure a driver for the 1756-ENET or to manually configure the newer modules, select the ____________________ driver in the Configure Drivers window.

After a driver has been configured, open the ____________________ window to verify communication has been established with the target device.

When configuring a 1756-ENET Ethernet driver using RSLinx, select a dummy modem cable to connect the module and the personal computer.

The 1756-ENET Ethernet driver must be configured prior to configuring the personal computer with which communication is desired.

In the Configure Drivers window, the driver that can only be used to configure modules newer than the 1756-ENET is the ____________________ driver.

Introduction to Control Logix Hardware

Introduction to Rs Logix 5000 Software

Number Systems

Rs Logix 5000 Project Organization

Understanding Control Logix I-O Addressing

Modular Controllogix Digital and Analog I-O Configuration

Compactlogix I-O Configuration

Communicating Between Your Personal Computer and Your Plc

Creating and Monitoring Rs Logix 5000 Tags

Introduction to Logic

The Basic Relay Instructions

Controllogix Timer Instructions

Adding Ladder Rung Documentation

Control Logix Counter Instructions

Comparison Instructions

Data-Handling Instructions

Introduction to the Get System Values Gsv and Set Systems Values Ssv Instructions

Introduction to the Rs Logix 5000 Function Block Programming Language

Configuring a Serial Driver Using Rs Linx

Configuring the Keyspan by Tripp Lite, High-Speed Usb to Serial Adapter Model Usa-19hs

Configuring an Rslinx Serial Driver Using a Rockwell Automation 9300-Usbs Usb to Serial Adapter

Installing and Configuring a Usb Driver for 1756-L7 Series Controllers

Determining and Modifying a Personal Computers Ip Address

Configuring 1756 Control Logix Modular Ethernet Hardware

Configuring the Ethernet Ip Address for a Compact Logix 1769-L23e, 1769-L32e, or 1769-L35e

Configuring Ethernet-Ip Drivers Using Rs Linx Software

Configuring a Compact Logix 1769-L23e, 1769-L32e, or 1769-L35e Ethernet-Ip Driver Using Rslinx

Configuring a Usb Driver for a 1756-En2t Ethernet Communications Module

Filters

Exam 26: Configuring a 1756-Enet Ethernet Driver Using Rs Linx

In the Configure Drivers window, the word "running" listed twice for a configured driver verifies communication with the target device.

In regard to communication problems, what actions can be taken if the 1756-ENET Ethernet module is currently unrecognized?

When configuring a 1756-ENET Ethernet driver using RSLinx, enter the IP address of the 1756-ENET module in the Configure Driver window; do not enter the IP address of the personal computer.

In the Add New RSLinx Classic Driver window, the best option is to accept the default driver name.

What steps can be taken if the word "running" is not listed twice for a configured 1756-ENET Ethernet driver in the Configure Drivers window?

To configure a driver for the 1756-ENET or to manually configure the newer modules, select the ____________________ driver in the Configure Drivers window.

After a driver has been configured, open the ____________________ window to verify communication has been established with the target device.

When configuring a 1756-ENET Ethernet driver using RSLinx, select a dummy modem cable to connect the module and the personal computer.

The 1756-ENET Ethernet driver must be configured prior to configuring the personal computer with which communication is desired.

In the Configure Drivers window, the driver that can only be used to configure modules newer than the 1756-ENET is the ____________________ driver.

Introduction to Control Logix Hardware

Introduction to Rs Logix 5000 Software

Number Systems

Rs Logix 5000 Project Organization

Understanding Control Logix I-O Addressing

Modular Controllogix Digital and Analog I-O Configuration

Compactlogix I-O Configuration

Communicating Between Your Personal Computer and Your Plc

Creating and Monitoring Rs Logix 5000 Tags

Introduction to Logic

The Basic Relay Instructions

Controllogix Timer Instructions

Adding Ladder Rung Documentation

Control Logix Counter Instructions

Comparison Instructions

Data-Handling Instructions

Introduction to the Get System Values Gsv and Set Systems Values Ssv Instructions

Introduction to the Rs Logix 5000 Function Block Programming Language

Configuring a Serial Driver Using Rs Linx

Configuring the Keyspan by Tripp Lite, High-Speed Usb to Serial Adapter Model Usa-19hs

Configuring an Rslinx Serial Driver Using a Rockwell Automation 9300-Usbs Usb to Serial Adapter

Installing and Configuring a Usb Driver for 1756-L7 Series Controllers

Determining and Modifying a Personal Computers Ip Address

Configuring 1756 Control Logix Modular Ethernet Hardware

Configuring the Ethernet Ip Address for a Compact Logix 1769-L23e, 1769-L32e, or 1769-L35e

Configuring Ethernet-Ip Drivers Using Rs Linx Software

Configuring a Compact Logix 1769-L23e, 1769-L32e, or 1769-L35e Ethernet-Ip Driver Using Rslinx

Configuring a Usb Driver for a 1756-En2t Ethernet Communications Module

Filters