Question 1

Briefly describe the Compatible Module selection for electronic keying.

Accepted Answer

A compatible module must have the same part number, manufacturer, and major revision. The minor revision must be equal to or greater than the value entered into the revision box.

Question 2

The electronic keying setting that is typically used by project developers in the early stages of a project when the specific modules have not been installed is ____________________.

Accepted Answer

Disable Keying

Question 3

Which personnel are typically responsible for the manual process of I/O configuration in ControlLogix systems?

Accepted Answer

I/O configuration in ControlLogix systems is a manual process completed by a programmer or maintenance or electrical individual when adding to or modifying the current system hardware.

Question 4

When entering settings on the Fault/Program screen for a new module, Fault mode is defined as when the controller experiences a major nonrecoverable fault.

Accepted Answer

A) True 
 B)False

Question 5

The module name is not part of the I/O points tags associated with the module's input points.

Accepted Answer

A) True 
 B)False

Question 6

The Program Mode setting for each output point can be set to On, Off, or Hold. How does each setting work when the controller goes into Program mode?

Accepted Answer

When the controller goes into Program mo

Question 7

Inhibit Module should not be checked during startups and debugging.

Accepted Answer

A) True 
 B)False

Question 8

If the module is faulted, a hexadecimal error code and explanation displays in the Module Fault box. Additional information can be found by clicking the ____________________ button.

Accepted Answer

The answer of If the module is faulted, a hexadecimal...

Question 9

In the Fault/Program Action screen, Connection mode is defined as when the controller goes into Program mode or Remote Test mode, or experiences a major recoverable fault or a communications failure.

Accepted Answer

A) True 
 B)False

Question 10

When selecting a module to configure, what are the three tab selections available in the Select Module window?

Accepted Answer

There are three ways to select a module

Question 11

The CompactLogix members of the ControlLogix family include the 1768 and the 1769 CompactLogix platforms. Both platforms use the same ____________________ modules.

Accepted Answer

The answer of The CompactLogix members of the ControlLogix family...

Question 12

When a new I/O module is added to an existing RSLogix 5000 project, the module must be ____________________ before its I/O tags are available for programming.

Accepted Answer

The answer of When a new I/O module is added...

Question 13

When configuring an analog output module and Use Fault Value is selected, the value entered in this parameter will be output.

Accepted Answer

A) True 
 B)False

Question 14

Briefly describe why problems are likely to occur if a module with a higher version and keying is disabled.

Accepted Answer

If one were to replace a module that was

Question 15

If communications with the controller fail, outputs from the controller are ignored, and the selected Fault mode is used. The Fault mode default setting is ____________________.

Accepted Answer

The answer of If communications with the controller fail, outputs...

Exam 7: Compactlogix I-O Configuration

Briefly describe the Compatible Module selection for electronic keying.

The electronic keying setting that is typically used by project developers in the early stages of a project when the specific modules have not been installed is ____________________.

Which personnel are typically responsible for the manual process of I/O configuration in ControlLogix systems?

When entering settings on the Fault/Program screen for a new module, Fault mode is defined as when the controller experiences a major nonrecoverable fault.

The module name is not part of the I/O points tags associated with the module's input points.

The Program Mode setting for each output point can be set to On, Off, or Hold. How does each setting work when the controller goes into Program mode?

Inhibit Module should not be checked during startups and debugging.

If the module is faulted, a hexadecimal error code and explanation displays in the Module Fault box. Additional information can be found by clicking the ____________________ button.

In the Fault/Program Action screen, Connection mode is defined as when the controller goes into Program mode or Remote Test mode, or experiences a major recoverable fault or a communications failure.

When selecting a module to configure, what are the three tab selections available in the Select Module window?

The CompactLogix members of the ControlLogix family include the 1768 and the 1769 CompactLogix platforms. Both platforms use the same ____________________ modules.

When a new I/O module is added to an existing RSLogix 5000 project, the module must be ____________________ before its I/O tags are available for programming.

When configuring an analog output module and Use Fault Value is selected, the value entered in this parameter will be output.

Briefly describe why problems are likely to occur if a module with a higher version and keying is disabled.

If communications with the controller fail, outputs from the controller are ignored, and the selected Fault mode is used. The Fault mode default setting is ____________________.

Introduction to Control Logix Hardware

Introduction to Rs Logix 5000 Software

Number Systems

Rs Logix 5000 Project Organization

Understanding Control Logix I-O Addressing

Modular Controllogix Digital and Analog I-O Configuration

Communicating Between Your Personal Computer and Your Plc

Creating and Monitoring Rs Logix 5000 Tags

Introduction to Logic

The Basic Relay Instructions

Controllogix Timer Instructions

Adding Ladder Rung Documentation

Control Logix Counter Instructions

Comparison Instructions

Data-Handling Instructions

Introduction to the Get System Values Gsv and Set Systems Values Ssv Instructions

Introduction to the Rs Logix 5000 Function Block Programming Language

Configuring a Serial Driver Using Rs Linx

Configuring the Keyspan by Tripp Lite, High-Speed Usb to Serial Adapter Model Usa-19hs

Configuring an Rslinx Serial Driver Using a Rockwell Automation 9300-Usbs Usb to Serial Adapter

Installing and Configuring a Usb Driver for 1756-L7 Series Controllers

Determining and Modifying a Personal Computers Ip Address

Configuring 1756 Control Logix Modular Ethernet Hardware

Configuring the Ethernet Ip Address for a Compact Logix 1769-L23e, 1769-L32e, or 1769-L35e

Configuring a 1756-Enet Ethernet Driver Using Rs Linx

Configuring Ethernet-Ip Drivers Using Rs Linx Software

Configuring a Compact Logix 1769-L23e, 1769-L32e, or 1769-L35e Ethernet-Ip Driver Using Rslinx

Configuring a Usb Driver for a 1756-En2t Ethernet Communications Module

Filters