Question 1

The uniformity of symbols within a print is not critical to the final layout.

Accepted Answer

A) True 
 B)False

Question 2

What are the two parts to a schematic layout?

Accepted Answer

A)  symbols and units 
B)  arrangement and notation 
C)  labeling and symbols 
D)  notation and labeling 
E)  none of the above 
A)  symbols and units 
B)  arrangement and notation 
C)  labeling and symbols 
D)  notation and labeling 
E)  none of the above

Question 3

Electrical circuits provide the path for electrical flow from the source of electricity through system components and connections and back to the source.

Accepted Answer

A) True 
 B)False

Question 4

A(n) ____ is an electronic circuit that has been fabricated with extremely small components as an inseparable assembly known as a(n) ____.

Accepted Answer

A)  amplifier; input signal 
B)  integrated circuit; capacitor 
C)  printed circuit board; chip 
D)  integrated circuit; chip 
E)  none of the above 
A)  amplifier; input signal 
B)  integrated circuit; capacitor 
C)  printed circuit board; chip 
D)  integrated circuit; chip 
E)  none of the above

Question 5

MATCHING
Match the type of diagram with its description.
-Associated with multiconductor systems

Accepted Answer

A) pictorial 
B) schematic 
C) block 
D) wiring 
E) schematic wiring
F)highway wiring
G)wireless
H)cable 
A) pictorial 
B) schematic 
C) block 
D) wiring 
E) schematic wiring
F)highway wiring
G)wireless
H)cable

Question 6

MATCHING
Match the type of diagram with its description.
-Shows all of the interconnections of the system components

Accepted Answer

A) pictorial 
B) schematic 
C) block 
D) wiring 
E) schematic wiring
F)highway wiring
G)wireless
H)cable 
A) pictorial 
B) schematic 
C) block 
D) wiring 
E) schematic wiring
F)highway wiring
G)wireless
H)cable

Question 7

An arrow through (or to) a symbol changes the component from a variable value device to a fixed value device.

Accepted Answer

A) True 
 B)False

Question 8

Define electronics.

Accepted Answer

Electronics is the control of

Question 9

What are the abbreviations of a transistor, a plug, a diode, a resistor, and an inductor (make sure they are in the order given)?

Accepted Answer

A)  T, P, D, R, I 
B)  R, P, I, S, L 
C)  Q, P, D, R, I 
D)  Q, L, I, R, D 
E)  none of the above 
A)  T, P, D, R, I 
B)  R, P, I, S, L 
C)  Q, P, D, R, I 
D)  Q, L, I, R, D 
E)  none of the above

Question 10

Leadless plastic and ceramic IC chip housings are new products used in electronic circuits that have been brought into use by the advent of ____.

Accepted Answer

A)  the additive process of printed circuit preparation 
B)  PCB's 
C)  surface mount technology 
D)  electrolyses process 
E)  none of the above 
A)  the additive process of printed circuit preparation 
B)  PCB's 
C)  surface mount technology 
D)  electrolyses process 
E)  none of the above

Question 11

MATCHING
Match the type of diagram with its description.
-Symbols exhibit a minimum of detail of the component and generally no connections at individual terminals

Accepted Answer

A) pictorial 
B) schematic 
C) block 
D) wiring 
E) schematic wiring
F)highway wiring
G)wireless
H)cable 
A) pictorial 
B) schematic 
C) block 
D) wiring 
E) schematic wiring
F)highway wiring
G)wireless
H)cable

Question 12

MATCHING
Match the type of diagram with its description.
-The complete circuit is drawn showing the electrical current path and the components of the circuit and the connection terminals are shown in their proper location

Accepted Answer

A) pictorial 
B) schematic 
C) block 
D) wiring 
E) schematic wiring
F)highway wiring
G)wireless
H)cable 
A) pictorial 
B) schematic 
C) block 
D) wiring 
E) schematic wiring
F)highway wiring
G)wireless
H)cable

Question 13

AC refers to what?

Accepted Answer

The answer of AC refers to what?...

Question 14

If A = 3 times 10 to the power of negative 6, and B = 2 times 10 to the power of 5, what is the product of A times B?

Accepted Answer

A)  6 times 10 to the power of negative 1 
B)  6 times 10 to the power of 1 
C)  6 times 10 to the power of 11 
D)  6 times 10 to the power of 30 
E)  none of the above 
A)  6 times 10 to the power of negative 1 
B)  6 times 10 to the power of 1 
C)  6 times 10 to the power of 11 
D)  6 times 10 to the power of 30 
E)  none of the above

Question 15

Diodes and transistors are types of ____.

Accepted Answer

A)  capacitors 
B)  conductors 
C)  semiconductors 
D)  coils 
E)  none of the above 
A)  capacitors 
B)  conductors 
C)  semiconductors 
D)  coils 
E)  none of the above

Question 16

________________, also known as ___________________, are drawn to scale with dimensions and include a parts list that is coordinated with the drawing by identification balloons.

Accepted Answer

Cable asse

Question 17

A ____________________ is an aluminum or copper plate or tubing that carries the electrical current.

Accepted Answer

The answer of A ____________________ is an aluminum or copper...

Question 18

According to ASME, there should be no variation to electrical symbols or electronic symbols because of the possibility for misinterpretation.

Accepted Answer

A) True 
 B)False

Question 19

A ____ is a simplified or condensed representation of a point to point interconnecting wiring diagram that can be used when it becomes difficult to draw individual connect lines because of diagram complexity or when it is not necessary to show all of the wires between terminal blocks.

Accepted Answer

A)  One line diagram 
B)  wiring diagram 
C)  highway diagram 
D)  schematic diagram 
E)  none of the above 
A)  One line diagram 
B)  wiring diagram 
C)  highway diagram 
D)  schematic diagram 
E)  none of the above

Question 20

The only drilled holes that are required when using surface mounted devices are the ones for chassis mounting or feed through between layers.

Accepted Answer

A) True 
 B)False

The uniformity of symbols within a print is not critical to the final layout.

What are the two parts to a schematic layout?

Electrical circuits provide the path for electrical flow from the source of electricity through system components and connections and back to the source.

A(n) is an electronic circuit that has been fabricated with extremely small components as an inseparable assembly known as a(n) .

MATCHING Match the type of diagram with its description. -Associated with multiconductor systems

MATCHING Match the type of diagram with its description. -Shows all of the interconnections of the system components

An arrow through (or to) a symbol changes the component from a variable value device to a fixed value device.

Define electronics.

What are the abbreviations of a transistor, a plug, a diode, a resistor, and an inductor (make sure they are in the order given)?

Leadless plastic and ceramic IC chip housings are new products used in electronic circuits that have been brought into use by the advent of ____.

MATCHING Match the type of diagram with its description. -Symbols exhibit a minimum of detail of the component and generally no connections at individual terminals

MATCHING Match the type of diagram with its description. -The complete circuit is drawn showing the electrical current path and the components of the circuit and the connection terminals are shown in their proper location

AC refers to what?

If A = 3 times 10 to the power of negative 6, and B = 2 times 10 to the power of 5, what is the product of A times B?

Diodes and transistors are types of ____.

, also known as ___, are drawn to scale with dimensions and include a parts list that is coordinated with the drawing by identification balloons.

A ____________________ is an aluminum or copper plate or tubing that carries the electrical current.

According to ASME, there should be no variation to electrical symbols or electronic symbols because of the possibility for misinterpretation.

A ____ is a simplified or condensed representation of a point to point interconnecting wiring diagram that can be used when it becomes difficult to draw individual connect lines because of diagram complexity or when it is not necessary to show all of the wires between terminal blocks.

The only drilled holes that are required when using surface mounted devices are the ones for chassis mounting or feed through between layers.

Introduction to Engineering and Manufacturing Technology Print Reading

Communicating with a Sketch

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Multiviews

Reading Auxiliary Views

Manufacturing Materials and Processes

Reading Dimensions

Reading Prints With Fasteners and Springs

Reading Sections, Revolutions, and Conventional Breaks

Reading Geometric Dimensioning and Tolerancing

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Reading Prints of Working Drawings

Welding Processes and Reading Welding Representations

Reading Prints of Pictorial Drawings

Filters

Exam 17: Reading Electrical Diagrams and Schematics

The uniformity of symbols within a print is not critical to the final layout.

What are the two parts to a schematic layout?

Electrical circuits provide the path for electrical flow from the source of electricity through system components and connections and back to the source.

A(n) ____ is an electronic circuit that has been fabricated with extremely small components as an inseparable assembly known as a(n) ____.

MATCHING Match the type of diagram with its description. -Associated with multiconductor systems

MATCHING Match the type of diagram with its description. -Shows all of the interconnections of the system components

An arrow through (or to) a symbol changes the component from a variable value device to a fixed value device.

Define electronics.

What are the abbreviations of a transistor, a plug, a diode, a resistor, and an inductor (make sure they are in the order given)?

Leadless plastic and ceramic IC chip housings are new products used in electronic circuits that have been brought into use by the advent of ____.

MATCHING Match the type of diagram with its description. -Symbols exhibit a minimum of detail of the component and generally no connections at individual terminals

MATCHING Match the type of diagram with its description. -The complete circuit is drawn showing the electrical current path and the components of the circuit and the connection terminals are shown in their proper location

AC refers to what?

If A = 3 times 10 to the power of negative 6, and B = 2 times 10 to the power of 5, what is the product of A times B?

Diodes and transistors are types of ____.

________________, also known as ___________________, are drawn to scale with dimensions and include a parts list that is coordinated with the drawing by identification balloons.

A ____________________ is an aluminum or copper plate or tubing that carries the electrical current.

According to ASME, there should be no variation to electrical symbols or electronic symbols because of the possibility for misinterpretation.

A ____ is a simplified or condensed representation of a point to point interconnecting wiring diagram that can be used when it becomes difficult to draw individual connect lines because of diagram complexity or when it is not necessary to show all of the wires between terminal blocks.

The only drilled holes that are required when using surface mounted devices are the ones for chassis mounting or feed through between layers.

Introduction to Engineering and Manufacturing Technology Print Reading

Communicating with a Sketch

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Multiviews

Reading Auxiliary Views

Manufacturing Materials and Processes

Reading Dimensions

Reading Prints With Fasteners and Springs

Reading Sections, Revolutions, and Conventional Breaks

Reading Geometric Dimensioning and Tolerancing

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Reading Prints of Working Drawings

Welding Processes and Reading Welding Representations

Reading Prints of Pictorial Drawings

Filters

A(n) is an electronic circuit that has been fabricated with extremely small components as an inseparable assembly known as a(n) .

, also known as ___, are drawn to scale with dimensions and include a parts list that is coordinated with the drawing by identification balloons.