Question 1

A method for translating customer requirements into functional design is known as ________.

Accepted Answer

Quality Function Dep

Question 2

A manufacturer of detergent enhances their product offering by introducing new scents of their product.This is an example of which kind of R&D?

Accepted Answer

A) Technological push 
B) New product innovation 
C) Market pull 
D) Discontinuous design 
A) Technological push 
B) New product innovation 
C) Market pull 
D) Discontinuous design

Question 3

U-shaped production lines that are more efficient for low-volume production as compared to a job shop are known as flexible manufacturing systems.

Accepted Answer

A) True 
 B)False

Question 4

Which option should be chosen if the expected demand is 5,000 units per month?

Accepted Answer

A) New manufacturing plant 
B) Subcontracting 
C) Either of the two options 
D) None of the two options 
A) New manufacturing plant 
B) Subcontracting 
C) Either of the two options 
D) None of the two options

Question 5

Use the information below to answer the following question(s).
A production line operates for 450 minutes per day.Desired production volume is 80 units per day.Total task time to make the product is 56 minutes.
-What is the minimum number of workstations required?

Accepted Answer

A) 5 
B) 8 
C) 10 
D) 12 
A) 5 
B) 8 
C) 10 
D) 12

Question 6

Quality Function Deployment is

Accepted Answer

A) a method for translating customer requirements into functional design. 
B) also known as voice of the customer. 
C) also called house of quality. 
D) All of the above 
A) a method for translating customer requirements into functional design. 
B) also known as voice of the customer. 
C) also called house of quality. 
D) All of the above

Question 7

A production manager wants to design an assembly line that will turn out 800 widgets per day.There will be eight working hours in each day.What is the optimum cycle time?

Accepted Answer

A) 36 seconds 
B) 60 seconds 
C) 6 seconds 
D) 3.6 seconds 
A) 36 seconds 
B) 60 seconds 
C) 6 seconds 
D) 3.6 seconds

Question 8

Use the information below to answer the following question(s).
A production line operates for 450 minutes per day.Desired production volume is 80 units per day.Total task time to make the product is 56 minutes.
-What is the balance delay?

Accepted Answer

A) 88.88% 
B) 0.44% 
C) 66.67% 
D) 33.33% 
A) 88.88% 
B) 0.44% 
C) 66.67% 
D) 33.33%

Question 9

A schematic picture of a process using symbols is called a ________.

Accepted Answer

The answer of A schematic picture of a process using...

Question 10

In Muther's grid the Symbol "I" represents

Accepted Answer

A) Absolutely necessary. 
B) Important. 
C) Unimportant. 
D) Undesirable. 
A) Absolutely necessary. 
B) Important. 
C) Unimportant. 
D) Undesirable.

Question 11

The "uptime" or proportion of time that a product or system functions properly is called ________.

Accepted Answer

The answer of The "uptime" or proportion of time that...

Question 12

The model used in designing functional layouts where movement is minimized is called the ________.

Accepted Answer

The answer of The model used in designing functional layouts...

Question 13

Applied research is practical exploration that often has a profit motive.

Accepted Answer

A) True 
 B)False

Question 14

A manufacturer of light bulbs tests their products in a very rigorous manner to achieve 5000 hours of life,which is much higher than the industry standard.This is an example of

Accepted Answer

A) Design for Reuse. 
B) Design for Reliability. 
C) Design for Manufacture. 
D) Design for Maintainability. 
A) Design for Reuse. 
B) Design for Reliability. 
C) Design for Manufacture. 
D) Design for Maintainability.

Question 15

Layouts in which the product is stationary and equipment or machines are brought to the product is known as a ________.

Accepted Answer

fixed-posi

Question 16

A manufacturer of video game consoles introduces a new product in the market with new eye tracking sensor technology.This is an example of which kind of R&D?

Accepted Answer

A) Technological push 
B) Muther's technology 
C) Market pull 
D) Continuous design 
A) Technological push 
B) Muther's technology 
C) Market pull 
D) Continuous design

Question 17

The type of processing system which is used for highly standardized products is

Accepted Answer

A) continuous flow. 
B) job shop. 
C) batch. 
D) project. 
A) continuous flow. 
B) job shop. 
C) batch. 
D) project.

Question 18

Quality Function Deployment (QFD)is also known as house of quality.

Accepted Answer

A) True 
 B)False

Question 19

In Muther's grid the Symbol "X" represents

Accepted Answer

A) Absolutely necessary. 
B) Important. 
C) Unimportant. 
D) Undesirable. 
A) Absolutely necessary. 
B) Important. 
C) Unimportant. 
D) Undesirable.

Question 20

The process of designing products that are complete changes from existing products is called continuous design.

Accepted Answer

A) True 
 B)False

A method for translating customer requirements into functional design is known as ________.

A manufacturer of detergent enhances their product offering by introducing new scents of their product.This is an example of which kind of R&D?

U-shaped production lines that are more efficient for low-volume production as compared to a job shop are known as flexible manufacturing systems.

Which option should be chosen if the expected demand is 5,000 units per month?

Use the information below to answer the following question(s). A production line operates for 450 minutes per day.Desired production volume is 80 units per day.Total task time to make the product is 56 minutes. -What is the minimum number of workstations required?

Quality Function Deployment is

A production manager wants to design an assembly line that will turn out 800 widgets per day.There will be eight working hours in each day.What is the optimum cycle time?

Use the information below to answer the following question(s). A production line operates for 450 minutes per day.Desired production volume is 80 units per day.Total task time to make the product is 56 minutes. -What is the balance delay?

A schematic picture of a process using symbols is called a ________.

In Muther's grid the Symbol "I" represents

The "uptime" or proportion of time that a product or system functions properly is called ________.

The model used in designing functional layouts where movement is minimized is called the ________.

Applied research is practical exploration that often has a profit motive.

A manufacturer of light bulbs tests their products in a very rigorous manner to achieve 5000 hours of life,which is much higher than the industry standard.This is an example of

Layouts in which the product is stationary and equipment or machines are brought to the product is known as a ________.

A manufacturer of video game consoles introduces a new product in the market with new eye tracking sensor technology.This is an example of which kind of R&D?

The type of processing system which is used for highly standardized products is

Quality Function Deployment (QFD)is also known as house of quality.

In Muther's grid the Symbol "X" represents

The process of designing products that are complete changes from existing products is called continuous design.

Introduction to Supply Chain and Operations Management

Supply Chain and Operations Strategy

Service Design

Customer Relationship Management

Strategic Sourcing

Supplier Management

Demand Management and Forecasting

Inventory Management Fundamentals and Independent Demand

Sales and Operations Planning and Enterprise Resource Planning

Logistics

Project Management

Supply Chain Quality Management

Statistical Process Control

New Section

Filters

Exam 3: Product and Process Design and Mapping

A method for translating customer requirements into functional design is known as ________.

A manufacturer of detergent enhances their product offering by introducing new scents of their product.This is an example of which kind of R&D?

U-shaped production lines that are more efficient for low-volume production as compared to a job shop are known as flexible manufacturing systems.

Which option should be chosen if the expected demand is 5,000 units per month?

Use the information below to answer the following question(s). A production line operates for 450 minutes per day.Desired production volume is 80 units per day.Total task time to make the product is 56 minutes. -What is the minimum number of workstations required?

Quality Function Deployment is

A production manager wants to design an assembly line that will turn out 800 widgets per day.There will be eight working hours in each day.What is the optimum cycle time?

Use the information below to answer the following question(s). A production line operates for 450 minutes per day.Desired production volume is 80 units per day.Total task time to make the product is 56 minutes. -What is the balance delay?

A schematic picture of a process using symbols is called a ________.

In Muther's grid the Symbol "I" represents

The "uptime" or proportion of time that a product or system functions properly is called ________.

The model used in designing functional layouts where movement is minimized is called the ________.

Applied research is practical exploration that often has a profit motive.

A manufacturer of light bulbs tests their products in a very rigorous manner to achieve 5000 hours of life,which is much higher than the industry standard.This is an example of

Layouts in which the product is stationary and equipment or machines are brought to the product is known as a ________.

A manufacturer of video game consoles introduces a new product in the market with new eye tracking sensor technology.This is an example of which kind of R&D?

The type of processing system which is used for highly standardized products is

Quality Function Deployment (QFD)is also known as house of quality.

In Muther's grid the Symbol "X" represents

The process of designing products that are complete changes from existing products is called continuous design.

Introduction to Supply Chain and Operations Management

Supply Chain and Operations Strategy

Service Design

Customer Relationship Management

Strategic Sourcing

Supplier Management

Demand Management and Forecasting

Inventory Management Fundamentals and Independent Demand

Sales and Operations Planning and Enterprise Resource Planning

Logistics

Project Management

Supply Chain Quality Management

Statistical Process Control

New Section

Filters