Question 1

Common initial bilevel positive airway pressure settings are IPAP from ____ cm H2O and EPAP from ____ cm H2O.

Accepted Answer

A)  2 to 6; 1 to 2 
B)  4 to 8; 2 to 3 
C)  6 to 10; 3 to 4 
D)  8 to 12; 4 to 5 
A)  2 to 6; 1 to 2 
B)  4 to 8; 2 to 3 
C)  6 to 10; 3 to 4 
D)  8 to 12; 4 to 5

Question 2

A higher IPAP level will result in a larger _______________ and minute ventilation.

Accepted Answer

The answer of A higher IPAP level will result in...

Question 3

The ____ is the most common interface used in NPPV for obstructive sleep apnea.

Accepted Answer

A)  nasal mask 
B)  oro-nasal mask 
C)  nasal pillows 
D)  full-face mask 
A)  nasal mask 
B)  oro-nasal mask 
C)  nasal pillows 
D)  full-face mask

Question 4

Describe the full-face mask interface.

Accepted Answer

Full-face mask covers almost the entire

Question 5

Conservative therapies for the treatment of OSA, such as weight loss and patient positioning, have been successful.

Accepted Answer

A) True 
 B)False

Question 6

A bilevel positive airway pressure setting of 8 and 4 means that the EPAP is 8 cm H2O and the IPAP is 4 cm H2O.

Accepted Answer

A) True 
 B)False

Question 7

When positive airway pressure is used to treat or relieve OSA the initial CPAP is started at 4 cm H2O, and titrated to a desired endpoint.

Accepted Answer

A) True 
 B)False

Question 8

Two indications for bilevel PAP are acute respiratory failure and ____.

Accepted Answer

A)  apnea 
B)  acute hypercapnic exacerbations of COPD 
C)  progressive hypoventilation 
D)  facial trauma 
A)  apnea 
B)  acute hypercapnic exacerbations of COPD 
C)  progressive hypoventilation 
D)  facial trauma

Question 9

Which of the following is a disadvantage of the nasal mask?

Accepted Answer

A)  asphyxiation in power or gas outage 
B)  alarm and monitor may be necessary 
C)  gas leaks 
D)  regurgitation and aspiration 
A)  asphyxiation in power or gas outage 
B)  alarm and monitor may be necessary 
C)  gas leaks 
D)  regurgitation and aspiration

Common initial bilevel positive airway pressure settings are IPAP from cm H₂O and EPAP from cm H₂O.

A higher IPAP level will result in a larger _______________ and minute ventilation.

The ____ is the most common interface used in NPPV for obstructive sleep apnea.

Describe the full-face mask interface.

Conservative therapies for the treatment of OSA, such as weight loss and patient positioning, have been successful.

A bilevel positive airway pressure setting of 8 and 4 means that the EPAP is 8 cm H₂O and the IPAP is 4 cm H₂O.

When positive airway pressure is used to treat or relieve OSA the initial CPAP is started at 4 cm H₂O, and titrated to a desired endpoint.

Two indications for bilevel PAP are acute respiratory failure and ____.

Which of the following is a disadvantage of the nasal mask?

Principles of Mechanical Ventilation

Effects of Positive Pressure Ventilation

Classification of Mechanical Ventilators

Operating Modes of Mechanical Ventilation

Special Airways for Ventilation

Airway Management in Mechanical Ventilation

Initiation of Mechanical Ventilation

Monitoring in Mechanical Ventilation

Hemodynamic Monitoring

Ventilator Waveform Analysis

Management of Mechanical Ventilation

Pharmacotherapy for Mechanical Ventilation

Procedures Related to Mechanical Ventilation

Critical Care Issues in Mechanical Ventilation

Weaning From Mechanical Ventilation

Neonatal Mechanical Ventilation

Mechanical Ventilation in Non-Traditional Settings

Filters

Exam 7: Noninvasive Positive Pressure Ventilation

Common initial bilevel positive airway pressure settings are IPAP from ____ cm H2O and EPAP from ____ cm H2O.

A higher IPAP level will result in a larger _______________ and minute ventilation.

The ____ is the most common interface used in NPPV for obstructive sleep apnea.

Describe the full-face mask interface.

Conservative therapies for the treatment of OSA, such as weight loss and patient positioning, have been successful.

A bilevel positive airway pressure setting of 8 and 4 means that the EPAP is 8 cm H2O and the IPAP is 4 cm H2O.

When positive airway pressure is used to treat or relieve OSA the initial CPAP is started at 4 cm H2O, and titrated to a desired endpoint.

Two indications for bilevel PAP are acute respiratory failure and ____.

Which of the following is a disadvantage of the nasal mask?

Principles of Mechanical Ventilation

Effects of Positive Pressure Ventilation

Classification of Mechanical Ventilators

Operating Modes of Mechanical Ventilation

Special Airways for Ventilation

Airway Management in Mechanical Ventilation

Initiation of Mechanical Ventilation

Monitoring in Mechanical Ventilation

Hemodynamic Monitoring

Ventilator Waveform Analysis

Management of Mechanical Ventilation

Pharmacotherapy for Mechanical Ventilation

Procedures Related to Mechanical Ventilation

Critical Care Issues in Mechanical Ventilation

Weaning From Mechanical Ventilation

Neonatal Mechanical Ventilation

Mechanical Ventilation in Non-Traditional Settings

Filters

Common initial bilevel positive airway pressure settings are IPAP from cm H₂O and EPAP from cm H₂O.

A bilevel positive airway pressure setting of 8 and 4 means that the EPAP is 8 cm H₂O and the IPAP is 4 cm H₂O.

When positive airway pressure is used to treat or relieve OSA the initial CPAP is started at 4 cm H₂O, and titrated to a desired endpoint.