Question 1

Crystalline solids .

Accepted Answer

A)  are usually very soft 
B)  exist only at high temperatures 
C)  exist only at very low temperatures 
D)  have their particles arranged randomly 
E)  have highly ordered structures 
A)  are usually very soft 
B)  exist only at high temperatures 
C)  exist only at very low temperatures 
D)  have their particles arranged randomly 
E)  have highly ordered structures

Question 2

The intermolecular force(s) responsible for the fact that CH4 has the lowest boiling point in the set CH4, SiH4, GeH4, SnH4 is/are .

Accepted Answer

A)  mainly hydrogen bonding but also dipole- dipole interactions 
B)  dipole- dipole interactions 
C)  London dispersion forces 
D)  mainly London- dispersion forces but also dipole- dipole interactions 
E)  hydrogen bonding 
A)  mainly hydrogen bonding but also dipole- dipole interactions 
B)  dipole- dipole interactions 
C)  London dispersion forces 
D)  mainly London- dispersion forces but also dipole- dipole interactions 
E)  hydrogen bonding

Question 3

London Dispersion Forces tend to in strength with increasing molecular weight.

Accepted Answer

The answer of London Dispersion Forces tend to in strength...

Question 4

CsCl crystallizes in a unit cell that contains the Cs+ ion at the center of a cube that has a Cl- at each corner. Each unit cell contains Cs+ ions and Cl- , ions, respectively.

Accepted Answer

A)  1 and 8 
B)  2 and 1 
C)  1 and 1 
D)  2 and 4 
E)  2 and 2 
A)  1 and 8 
B)  2 and 1 
C)  1 and 1 
D)  2 and 4 
E)  2 and 2

Question 5

The heating curve shown was generated by measuring the heat flow and temperature for a solid as it was heated. The slope of the segment corresponds to the heat capacity of the liquid of the substance.

Accepted Answer

A)  AB 
B)  BC 
C)  CD 
D)  DE 
E)  EF 
A)  AB 
B)  BC 
C)  CD 
D)  DE 
E)  EF

Question 6

Of the following, is the most volatile.

Accepted Answer

A)  CCl4  
B)  CF4  
C)  CBr4  
D)  CH4  
E)  C6H14 
A)  CCl4  
B)  CF4  
C)  CBr4  
D)  CH4  
E)  C6H14

Question 7

A gas is _ and assumes of its container whereas a liquid is and assumes of its container.

Accepted Answer

A)  compressible, the shape, not compressible, the volume and shape 
B)  condensed, the volume and shape, condensed, the volume and shape 
C)  compressible, the volume and shape, compressible, the volume 
D)  condensed, the shape, compressible, the volume and shape 
E)  compressible, the volume and shape, not compressible, the shape of a portion 
A)  compressible, the shape, not compressible, the volume and shape 
B)  condensed, the volume and shape, condensed, the volume and shape 
C)  compressible, the volume and shape, compressible, the volume 
D)  condensed, the shape, compressible, the volume and shape 
E)  compressible, the volume and shape, not compressible, the shape of a portion

Question 8

The normal boiling point of the substance with the phase diagram shown above is _ °C.

Accepted Answer

A)  10 
B)  20 
C)  30 
D)  40 
E)  50 
A)  10 
B)  20 
C)  30 
D)  40 
E)  50

Question 9

When the phase diagram for a substance has a solid- liquid phase boundary line that has a negative slope (leans to the left), the substance .

Accepted Answer

A)  can go from solid to liquid, within a small temperature range, via the application of pressure 
B)  cannot be liquefied above its triple point 
C)  sublimes rather than melts under ordinary conditions 
D)  cannot go from solid to liquid by application of pressure at any temperature 
E)  melts rather than sublimes under ordinary conditions 
A)  can go from solid to liquid, within a small temperature range, via the application of pressure 
B)  cannot be liquefied above its triple point 
C)  sublimes rather than melts under ordinary conditions 
D)  cannot go from solid to liquid by application of pressure at any temperature 
E)  melts rather than sublimes under ordinary conditions

Question 10

Heat of sublimation can be approximated by adding together and .

Accepted Answer

A)  heat of freezing (solidification), heat of condensation 
B)  heat of fusion, heat of condensation 
C)  heat of freezing (solidification), heat of vaporization 
D)  heat of fusion, heat of vaporization 
E)  heat of deposition, heat of vaporization 
A)  heat of freezing (solidification), heat of condensation 
B)  heat of fusion, heat of condensation 
C)  heat of freezing (solidification), heat of vaporization 
D)  heat of fusion, heat of vaporization 
E)  heat of deposition, heat of vaporization

Question 11

On the phase diagram below, segment corresponds to the conditions of temperature and pressure under which the solid and the gas of the substance are in equilibrium.

Accepted Answer

A)  AB 
B)  BC 
C)  AC 
D)  CD 
E)  AD 
A)  AB 
B)  BC 
C)  AC 
D)  CD 
E)  AD

Question 12

An ionic solid, NaCl (s), dissolves in water because of the .

Accepted Answer

A)  relatively low melting point 
B)  strong coulombic interactions between oppositely charged ions 
C)  1:
1 ratio of ions in the unit cell 
D)  simple face- centered cubic unit cell type it forms 
E)  relatively low lattice energy due to small charges of Na+ and Cl- ions 
A)  relatively low melting point 
B)  strong coulombic interactions between oppositely charged ions 
C)  1:
1 ratio of ions in the unit cell 
D)  simple face- centered cubic unit cell type it forms 
E)  relatively low lattice energy due to small charges of Na+ and Cl- ions

Question 13

Which statements about viscosity are true?
(i) Viscosity increases as temperature decreases.
(ii) Viscosity increases as molecular weight increases.
(iii) Viscosity increases as intermolecular forces increase.

Accepted Answer

A)  (i) only 
B)  (i) and (iii) 
C)  (ii) and (iii) 
D)  none 
E)  all 
A)  (i) only 
B)  (i) and (iii) 
C)  (ii) and (iii) 
D)  none 
E)  all

Question 14

Which one of the following substances will have hydrogen bonding as one of its intermolecular forces?

Accepted Answer

A) 
  
B)    
C) 
  
D)    
E) 
  
A) 
  
B)    
C) 
  
D)    
E)

Question 15

The scattering of light waves upon passing through a narrow slit is called .

Accepted Answer

A)  grating 
B)  diffusion 
C)  incidence 
D)  adhesion 
E)  diffraction 
A)  grating 
B)  diffusion 
C)  incidence 
D)  adhesion 
E)  diffraction

Question 16

The predominant intermolecular force in CaBr2 is _ .

Accepted Answer

A)  dipole- dipole forces 
B)  London- dispersion forces 
C)  ion- dipole forces 
D)  hydrogen bonding 
E)  ionic bonding 
A)  dipole- dipole forces 
B)  London- dispersion forces 
C)  ion- dipole forces 
D)  hydrogen bonding 
E)  ionic bonding

Question 17

The heating curve shown was generated by measuring the heat flow and temperature of a solid as it was heated. The heat flow into the sample in the segment will yield the value of the O Hvap of this substance.

Accepted Answer

A)  AB 
B)  BC 
C)  CD 
D)  DE 
E)  EF 
A)  AB 
B)  BC 
C)  CD 
D)  DE 
E)  EF

Question 18

In general, intramolecular forces determine the properties of a substance and intermolecular forces determine its properties.

Accepted Answer

The answer of In general, intramolecular forces determine the properties...

Question 19

Based on the figure above, the boiling point of diethyl ether under an external pressure of 1.32 atm is °C.

Accepted Answer

A)  20 
B)  0 
C)  10 
D)  30 
E)  40 
A)  20 
B)  0 
C)  10 
D)  30 
E)  40

Question 20

Volatility and vapor pressure are .

Accepted Answer

A)  both independent of temperature 
B)  not related 
C)  the same thing 
D)  inversely proportional to one another 
E)  directly proportional to one another 
A)  both independent of temperature 
B)  not related 
C)  the same thing 
D)  inversely proportional to one another 
E)  directly proportional to one another

Exam 11: Intermolecular Forces, Liquids, and Solids

Crystalline solids .

The intermolecular force(s) responsible for the fact that CH4 has the lowest boiling point in the set CH4, SiH4, GeH4, SnH4 is/are .

London Dispersion Forces tend to in strength with increasing molecular weight.

CsCl crystallizes in a unit cell that contains the Cs+ ion at the center of a cube that has a Cl- at each corner. Each unit cell contains Cs+ ions and Cl- , ions, respectively.

The heating curve shown was generated by measuring the heat flow and temperature for a solid as it was heated. The slope of the segment corresponds to the heat capacity of the liquid of the substance.

Of the following, is the most volatile.

A gas is _ and assumes of its container whereas a liquid is and assumes of its container.

The normal boiling point of the substance with the phase diagram shown above is _ °C.

When the phase diagram for a substance has a solid- liquid phase boundary line that has a negative slope (leans to the left), the substance .

Heat of sublimation can be approximated by adding together and .

On the phase diagram below, segment corresponds to the conditions of temperature and pressure under which the solid and the gas of the substance are in equilibrium.

An ionic solid, NaCl (s), dissolves in water because of the .

Which statements about viscosity are true? (i) Viscosity increases as temperature decreases. (ii) Viscosity increases as molecular weight increases. (iii) Viscosity increases as intermolecular forces increase.

Which one of the following substances will have hydrogen bonding as one of its intermolecular forces?

The scattering of light waves upon passing through a narrow slit is called .

The predominant intermolecular force in CaBr2 is _ .

The heating curve shown was generated by measuring the heat flow and temperature of a solid as it was heated. The heat flow into the sample in the segment will yield the value of the O Hvap of this substance.

In general, intramolecular forces determine the properties of a substance and intermolecular forces determine its properties.

Based on the figure above, the boiling point of diethyl ether under an external pressure of 1.32 atm is °C.

Volatility and vapor pressure are .

Introduction: Matter and Measurement

Atoms, Molecules, and Ions

Stoichiometry: Calculations With Chemical Formulas and Equations

Aqueous Reactions and Solution Stoichiometry

Electronic Structure of Atoms

Periodic Properties of the Elements

Basic Concepts of Chemical Bonding

Gases

Modern Materials

Properties of Solutions

Chemical Kinetics

Chemical Equilibrium

Acid-Base Equilibria

Additional Aspects of Equilibria

Chemistry of the Environment

Chemical Thermodynamics

Electrochemistry

Nuclear Chemistry

Chemistry of the Nonmetals

Metals and Metallurgy

Chemistry of Coordination Compounds

The Chemistry of Life: Organic and Biological Chemistry

Filters

The intermolecular force(s) responsible for the fact that CH₄has the lowest boiling point in the set CH₄, SiH₄, GeH₄, SnH₄is/are .

CsCl crystallizes in a unit cell that contains the Cs⁺ion at the center of a cube that has a Cl^-at each corner. Each unit cell contains Cs⁺ions and Cl^-, ions, respectively.

The predominant intermolecular force in CaBr₂is _ .

The heating curve shown was generated by measuring the heat flow and temperature of a solid as it was heated. The heat flow into the sample in the segment will yield the value of the O H_vapof this substance.