Question 1

Which command displays information about the carrier network, cell site, and available service?

Accepted Answer

A)  show cellular unit network 
B)  show cellular unit radio 
C)  show cellular unit hardware 
D)  show cellular unit profile 
A)  show cellular unit network 
B)  show cellular unit radio 
C)  show cellular unit hardware 
D)  show cellular unit profile

Question 2

Which Xmodem option is used to enhance error checking of an image that is copied to flash memory?

Accepted Answer

A)  -e 
B)  -r 
C)  -c 
D)  -x 
A)  -e 
B)  -r 
C)  -c 
D)  -x

Question 3

When you deploy Cisco Catalyst 3850 Series switches, which two modes of operation can you choose from?

Accepted Answer

A)  Active mode and Standby mode 
B)  Install mode and Bundle mode 
C)  Boot mode and Run mode 
D)  Exec mode and User mode 
A)  Active mode and Standby mode 
B)  Install mode and Bundle mode 
C)  Boot mode and Run mode 
D)  Exec mode and User mode

Question 4

Which protocol does TFTP typically use for transport?

Accepted Answer

A)  RSVP 
B)  TCP 
C)  HTTP 
D)  UDP 
A)  RSVP 
B)  TCP 
C)  HTTP 
D)  UDP

Question 5

Cisco NX-OS has added the ability to use which type of custom scripting to help manage user networks?

Accepted Answer

A)  C++ 
B)  Collective 
C)  SQL 
D)  Python 
A)  C++ 
B)  Collective 
C)  SQL 
D)  Python

Question 6

TFTP is a simple protocol for transferring files, such as a Cisco IOS or configuration file, from one device to another. Which device can be configured as a TFTP server?

Accepted Answer

A)  Cisco Content Engine 
B)  modem 
C)  Cisco router 
D)  CSU/DSU 
A)  Cisco Content Engine 
B)  modem 
C)  Cisco router 
D)  CSU/DSU

Question 7

Which type of memory stores the decompressed form of Cisco IOS Software and the running configuration?

Accepted Answer

A)  flash 
B)  ROM 
C)  NVRAM 
D)  DRAM 
A)  flash 
B)  ROM 
C)  NVRAM 
D)  DRAM

Question 8

Which two statements about a SmartJack are true? (Choose two.)

Accepted Answer

A)  It provides signal conversion. 
B)  It acts as a concentration point for dial-in and dial-out connections. 
C)  It operates at Layer 2 of the OSI model. 
D)  It provides channel testing. 
E)  It regenerates the signal to compensate for signal degradation from line transmission. 
A)  It provides signal conversion. 
B)  It acts as a concentration point for dial-in and dial-out connections. 
C)  It operates at Layer 2 of the OSI model. 
D)  It provides channel testing. 
E)  It regenerates the signal to compensate for signal degradation from line transmission.

Question 9

At the interface configuration prompt, which command returns you to the main configuration prompt?

Accepted Answer

A)  end 
B)  clear 
C)  quit 
D)  exit 
A)  end 
B)  clear 
C)  quit 
D)  exit

Question 10

Which address facilitates the routing of packets over an IP network?

Accepted Answer

A)  physical 
B)  transport 
C)  network 
D)  MAC 
A)  physical 
B)  transport 
C)  network 
D)  MAC

Question 11

Which command displays a list of file systems that are available on Cisco devices?

Accepted Answer

A)  show memory 
B)  show directory 
C)  show file system 
D)  show version 
A)  show memory 
B)  show directory 
C)  show file system 
D)  show version

Question 12

Which set of steps best describes how to assign a static IP address to the Ethernet port on a computer?

Accepted Answer

A)  From the Network and Sharing Center, click Internet Protocol (TCP/IP) , and follow the New Connection Wizard instructions. From the Network and Sharing Center, click Internet Protocol (TCP/IP) , and follow the New Connection Wizard instructions. 
B)  From the Network and Sharing Center, click Change adapter , then double-click a local area connection. Select Internet Protocol (TCP/IP) > Properties > Use the Following Address, and then configure the IP information. Change adapter , then double-click a local area connection. Select Internet Protocol (TCP/IP) > Properties > Use the Following Address, and then configure the IP information. 
C)  Click Start . Enter cmd and click OK . Enter the IP address XXX.XXX.XXX.XXX . Click Start . Enter cmd and click OK . Enter the IP address XXX.XXX.XXX.XXX . 
D)  From the Network and Sharing Center, double-click Local Area Connection. Select Properties > iPass Protocol (IEEE 802.1x) > Properties > Static IP . From the Network and Sharing Center, double-click Local Area Connection. Select Properties > iPass Protocol (IEEE 802.1x) > Properties > Static IP 
A)  From the Network and Sharing Center, click Internet Protocol (TCP/IP) , and follow the New Connection Wizard instructions. From the Network and Sharing Center, click Internet Protocol (TCP/IP) , and follow the New Connection Wizard instructions. 
B)  From the Network and Sharing Center, click Change adapter , then double-click a local area connection. Select Internet Protocol (TCP/IP) > Properties > Use the Following Address, and then configure the IP information. Change adapter , then double-click a local area connection. Select Internet Protocol (TCP/IP) > Properties > Use the Following Address, and then configure the IP information. 
C)  Click Start . Enter cmd and click OK . Enter the IP address XXX.XXX.XXX.XXX . Click Start . Enter cmd and click OK . Enter the IP address XXX.XXX.XXX.XXX . 
D)  From the Network and Sharing Center, double-click Local Area Connection. Select Properties > iPass Protocol (IEEE 802.1x) > Properties > Static IP . From the Network and Sharing Center, double-click Local Area Connection. Select Properties > iPass Protocol (IEEE 802.1x) > Properties > Static IP

Question 13

Which two Cisco Nexus 3400 Series switches support 400-Gbps Ethernet ports? (Choose two.)

Accepted Answer

A)  Cisco Nexus 34180YC 
B)  Cisco Nexus 34200YC-SM 
C)  Cisco Nexus 3432D-S 
D)  Cisco Nexus 3408-S 
E)  Cisco Nexus 3464C 
A)  Cisco Nexus 34180YC 
B)  Cisco Nexus 34200YC-SM 
C)  Cisco Nexus 3432D-S 
D)  Cisco Nexus 3408-S 
E)  Cisco Nexus 3464C

Question 14

Which command displays the configuration register setting?

Accepted Answer

A)  show flash 
B)  show running-config 
C)  show version 
D)  show config-register 
A)  show flash 
B)  show running-config 
C)  show version 
D)  show config-register

Question 15

Which bits represent the boot field in the configuration register value?

Accepted Answer

A)  highest two bits 
B)  lowest two bits 
C)  highest four bits 
D)  lowest four bits 
A)  highest two bits 
B)  lowest two bits 
C)  highest four bits 
D)  lowest four bits

Question 16

The colored wires at one end of a cable are in reverse sequence to the colored wires at the other end of the cable. Which cable does this configuration describe?

Accepted Answer

A)  rolled 
B)  crossover 
C)  coaxial 
D)  straight-through 
A)  rolled 
B)  crossover 
C)  coaxial 
D)  straight-through

Question 17

What are two standard fiber-optic connectors? (Choose two.)

Accepted Answer

A)  Lucent 
B)  rollover 
C)  subscriber 
D)  multidimension 
E)  crossover 
A)  Lucent 
B)  rollover 
C)  subscriber 
D)  multidimension 
E)  crossover

Question 18

Which two pairs of LAN Ethernet devices use an RJ-45 straight-through cable? (Choose two.)

Accepted Answer

A)  switch-to-switch 
B)  switch-to-router 
C)  switch-to-hub 
D)  router-to-router 
E)  switch-to-server 
A)  switch-to-switch 
B)  switch-to-router 
C)  switch-to-hub 
D)  router-to-router 
E)  switch-to-server

Question 19

Which two statements about Telnet and SSH are true? (Choose two.)

Accepted Answer

A)  SSH is a protocol that provides a secure remote access connection to network devices. 
B)  SSH uses the well-known TCP port 23 for its communication. 
C)  A Telnet network management connection is dropped when a router reboots. 
D)  Telnet is a protocol that provides a secure remote access connection to network devices. 
E)  Telnet is preferred over SSH for security reasons. 
A)  SSH is a protocol that provides a secure remote access connection to network devices. 
B)  SSH uses the well-known TCP port 23 for its communication. 
C)  A Telnet network management connection is dropped when a router reboots. 
D)  Telnet is a protocol that provides a secure remote access connection to network devices. 
E)  Telnet is preferred over SSH for security reasons.

Question 20

From a Windows command prompt, which command displays the local IP address of a computer?

Accepted Answer

A)  ipconfiguration 
B)  ip configuration 
C)  ipconfig 
D)  ip config 
A)  ipconfiguration 
B)  ip configuration 
C)  ipconfig 
D)  ip config

Exam 2: Cisco Certified Technician Routing & Switching (RSTECH)

Which command displays information about the carrier network, cell site, and available service?

Which Xmodem option is used to enhance error checking of an image that is copied to flash memory?

When you deploy Cisco Catalyst 3850 Series switches, which two modes of operation can you choose from?

Which protocol does TFTP typically use for transport?

Cisco NX-OS has added the ability to use which type of custom scripting to help manage user networks?

TFTP is a simple protocol for transferring files, such as a Cisco IOS or configuration file, from one device to another. Which device can be configured as a TFTP server?

Which type of memory stores the decompressed form of Cisco IOS Software and the running configuration?

Which two statements about a SmartJack are true? (Choose two.)

At the interface configuration prompt, which command returns you to the main configuration prompt?

Which address facilitates the routing of packets over an IP network?

Which command displays a list of file systems that are available on Cisco devices?

Which set of steps best describes how to assign a static IP address to the Ethernet port on a computer?

Which two Cisco Nexus 3400 Series switches support 400-Gbps Ethernet ports? (Choose two.)

Which command displays the configuration register setting?

Which bits represent the boot field in the configuration register value?

The colored wires at one end of a cable are in reverse sequence to the colored wires at the other end of the cable. Which cable does this configuration describe?

What are two standard fiber-optic connectors? (Choose two.)

Which two pairs of LAN Ethernet devices use an RJ-45 straight-through cable? (Choose two.)

Which two statements about Telnet and SSH are true? (Choose two.)

From a Windows command prompt, which command displays the local IP address of a computer?

Supporting Cisco Data Center System Devices (DCTECH)

Understanding Cisco Cybersecurity Operations Fundamentals (CBROPS)

Cisco Certified Network Associate (CCNA)

Managing Industrial Networks with Cisco Networking Technologies (IMINS)

DevNet Associate (DEVASC)

Conducting Forensic Analysis and Incident Response Using Cisco CyberOps Technologies (CBRFIR)

Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)

Implementing Cisco SD-WAN Solutions (ENSDWI)

Designing Cisco Enterprise Networks (ENSLD)

Designing Cisco Enterprise Wireless Networks (300-425 ENWLSD)

Implementing Cisco Enterprise Wireless Networks (300-430 ENWLSI)

Automating Cisco Enterprise Solutions (ENAUTO)

Implementing Cisco Service Provider Advanced Routing Solutions (SPRI)

Implementing Cisco Service Provider VPN Services (SPVI)

Designing Cisco Data Center Infrastructure (DCID)

Troubleshooting Cisco Data Center Infrastructure (DCIT)

Implementing Cisco Application Centric Infrastructure (DCACI)

Configuring Cisco MDS 9000 Series Switches (DCSAN)

Implementing Cisco Application Centric Infrastructure - Advanced

Automating Cisco Data Center Solutions (DCAUTO)

Securing Networks with Cisco Firepower (300-710 SNCF)

Implementing and Configuring Cisco Identity Services Engine (300-715 SISE)

Securing Email with Cisco Email Security Appliance (300-720 SESA)

Securing the Web with Cisco Web Security Appliance (300-725 SWSA)

Implementing Secure Solutions with Virtual Private Networks (SVPN 300-730)

Automating Cisco Security Solutions (SAUTO)

Implementing Cisco Collaboration Applications (CLICA)

Implementing Cisco Advanced Call Control and Mobility Services (CLASSM)

Implementing Cisco Collaboration Cloud and Edge Solutions

Implementing Cisco Collaboration Conferencing

Automating Cisco Collaboration Solutions (CLAUTO)

Implementing DevOps Solutions and Practices using Cisco Platforms (DEVOPS)

Developing Solutions Using Cisco IoT and Edge Platforms (DEVIOT)

Developing Applications for Cisco Webex and Webex Devices (DEVWBX)

Performing CyberOps Using Core Security Technologies (CBRCOR)

Implementing Cisco Enterprise Network Core Technologies (ENCOR)

Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)

Implementing and Operating Cisco Data Center Core Technologies (DCCOR)

Implementing and Operating Cisco Security Core Technologies

Implementing Cisco Collaboration Core Technologies (CLCOR)

Developing Applications using Cisco Core Platforms and APIs (DEVCOR)

CCDE Design Written

Deploying Cisco Unified Contact Center Express

Cisco Meraki Solutions Specialist

Securing Cisco Networks with Sourcefire FireAMP Endpoints

Designing Cisco Unified Contact Center Enterprise (UCCED)

Implementing and Supporting Cisco Unified Contact Center Enterprise (UCCEIS)

Cisco Collaboration SaaS Authorization Exam

Cisco Security Architecture for System Engineers

Adopting The Cisco Business Architecture Approach (DTBAA)

Cisco Customer Success Manager (CSM)

Mastering The Cisco Business Architecture Discipline (DTBAD)

Filters