Question 1

Which command-line interface mode is best described by this prompt? UCS-switch-A (nxos)#

Accepted Answer

A)  maintenance mode 
B)  EXEC mode 
C)  local management mode 
D)  global configuration mode 
E)  Cisco IOS mode 
A)  maintenance mode 
B)  EXEC mode 
C)  local management mode 
D)  global configuration mode 
E)  Cisco IOS mode B

Question 2

Refer to the exhibit. Which item does C represent?

Accepted Answer

A)  Pin icon (prevents Navigation pane from sliding) 
B)  Icon to view the Navigation pane 
C)  Favorite Icon (make any specific work pane in the application as your favorite) 
D)  Index Icon (view listing in alphabetical order) 
A)  Pin icon (prevents Navigation pane from sliding) 
B)  Icon to view the Navigation pane 
C)  Favorite Icon (make any specific work pane in the application as your favorite) 
D)  Index Icon (view listing in alphabetical order) C

Question 3

Which Cisco Nexus 5000 Series model supports 1/10G BASE-T ports?

Accepted Answer

A)  Cisco Nexus 5548P 
B)  Cisco Nexus 5548UP 
C)  Cisco Nexus 5596UP 
D)  Cisco Nexus 5596T 
A)  Cisco Nexus 5548P 
B)  Cisco Nexus 5548UP 
C)  Cisco Nexus 5596UP 
D)  Cisco Nexus 5596T D

Question 4

Refer to the exhibit. Which item does B represent?

Accepted Answer

A)  mLOM 
B)  Rear 2.5-inch drive bays 
C)  PCIe Riser 1 
D)  PCIe Riser 2 
E)  Power Supply 
A)  mLOM 
B)  Rear 2.5-inch drive bays 
C)  PCIe Riser 1 
D)  PCIe Riser 2 
E)  Power Supply

Question 5

With which data center type can a company lease the equipment and infrastructure?

Accepted Answer

A)  Managed services data center 
B)  Colocation data center 
C)  Green technology data center 
D)  Enterprise data center 
A)  Managed services data center 
B)  Colocation data center 
C)  Green technology data center 
D)  Enterprise data center

Question 6

Refer to the exhibit. What item does 6 represent?

Accepted Answer

A)  Trusted platform module (TPM) socket 
B)  RAID supercap connector 
C)  RTC battery CR2032 socket 
D)  Mezzanine-style connector for optional I/O expander module 
A)  Trusted platform module (TPM) socket 
B)  RAID supercap connector 
C)  RTC battery CR2032 socket 
D)  Mezzanine-style connector for optional I/O expander module

Question 7

Which tool is needed when servicing a UCS M5 server?

Accepted Answer

A)  PCIe slot cover 
B)  T-30 Torx driver 
C)  M5 DIMM puller 
D)  HDD removal tool 
A)  PCIe slot cover 
B)  T-30 Torx driver 
C)  M5 DIMM puller 
D)  HDD removal tool

Question 8

Which tool is needed when servicing a UCS M5 server?

Accepted Answer

A)  PCle slot cover 
B)  T-30 Torx driver 
C)  M5 DIMM puller 
D)  HDD removal tool 
A)  PCle slot cover 
B)  T-30 Torx driver 
C)  M5 DIMM puller 
D)  HDD removal tool

Question 9

In the Cisco UCS S3260 Storage Server which two of the below ports are available on a System I/O Controller? (Choose two.)

Accepted Answer

A)  Dedicated Management port 
B)  PCIe ports 
C)  KVM Console port 
D)  QSFP port 
E)  Ethernet LOM port 
A)  Dedicated Management port 
B)  PCIe ports 
C)  KVM Console port 
D)  QSFP port 
E)  Ethernet LOM port

Question 10

Which two types of information does the show module NX-OS command display? (Choose two.)

Accepted Answer

A)  Module license information 
B)  Module ports type 
C)  Module IP address 
D)  Module type 
E)  Module status 
A)  Module license information 
B)  Module ports type 
C)  Module IP address 
D)  Module type 
E)  Module status

Question 11

How many 10GBASE-T port licenses are preinstalled on a Cisco Nexus 3064-32T?

Accepted Answer

A)  16 
B)  32 
C)  48 
D)  64 
A)  16 
B)  32 
C)  48 
D)  64

Question 12

Which two cable types can support 10Gbps speed? (Choose two.)

Accepted Answer

A)  CAT7 
B)  CAT5a 
C)  CAT5e 
D)  CAT6a 
E)  CAT5 
A)  CAT7 
B)  CAT5a 
C)  CAT5e 
D)  CAT6a 
E)  CAT5

Question 13

Which three troubleshooting procedures do you perform when there is no power to a Cisco UCS B250 M2 Blade Server? (Choose three.)

Accepted Answer

A)  Decommission and acknowledge the blade. 
B)  Check the back of the blade to ensure that there is no damage to the connection that goes into chassis. 
C)  Reseat the memory DIMMs. 
D)  Check the CPU sockets for bent pins. 
E)  Reseat the blade in the same slot in the chassis.
F) Move the blade to another slot in the chassis. 
A)  Decommission and acknowledge the blade. 
B)  Check the back of the blade to ensure that there is no damage to the connection that goes into chassis. 
C)  Reseat the memory DIMMs. 
D)  Check the CPU sockets for bent pins. 
E)  Reseat the blade in the same slot in the chassis.
F) Move the blade to another slot in the chassis.

Question 14

Which type of optics module is supported by a Cisco Nexus 7700 F4-Series 30-Port 100-Gigabit Ethernet Module?

Accepted Answer

A)  QSFP28 
B)  SFP+ 
C)  Cisco CPAK 
D)  QSFP+ 
A)  QSFP28 
B)  SFP+ 
C)  Cisco CPAK 
D)  QSFP+

Question 15

Which type of optics module is supported by a 6-port 40 GE Cisco Nexus 7000 M2 Series I/O module?

Accepted Answer

A)  CPAK 
B)  QSFP+ 
C)  SFP/SFP+ 
D)  CFP 
A)  CPAK 
B)  QSFP+ 
C)  SFP/SFP+ 
D)  CFP

Question 16

Refer to the exhibit.   Which item does A represent?

Accepted Answer

A)  Emulex Adapter Card for Cisco UCS B420 M3 Blade Servers 
B)  Virtual Interface Card for Cisco UCS B420 M3 Blade Servers 
C)  mLOM for Cisco UCS B420 M3 Blade Servers 
D)  Virtual Emulex Adapter Card for Cisco UCS B420 M3 Blade Servers 
E)  SuperCap module for Cisco UCS B420 M3 Blade Servers 
A)  Emulex Adapter Card for Cisco UCS B420 M3 Blade Servers 
B)  Virtual Interface Card for Cisco UCS B420 M3 Blade Servers 
C)  mLOM for Cisco UCS B420 M3 Blade Servers 
D)  Virtual Emulex Adapter Card for Cisco UCS B420 M3 Blade Servers 
E)  SuperCap module for Cisco UCS B420 M3 Blade Servers

Question 17

Which two statements are true about the Cisco UCS C4200 Rack server and UCS C125 M5 compute node? (Choose two.)

Accepted Answer

A)  8 NVIDIA SXM2 V100 32G modules with NVLink interconnect 
B)  AMD EPYC 7000 series processors, with up to 32 cores per socket 
C)  2666-MHz DDR4 memory and 24 DIMM slots for up to 3 TB of total memory 
D)  Optional dual USB ports for increased storage or boot drive capacity 
E)  Over 45 TB of storage, with up to six small-form-factor 2.5-inch direct-attached drives per node 
A)  8 NVIDIA SXM2 V100 32G modules with NVLink interconnect 
B)  AMD EPYC 7000 series processors, with up to 32 cores per socket 
C)  2666-MHz DDR4 memory and 24 DIMM slots for up to 3 TB of total memory 
D)  Optional dual USB ports for increased storage or boot drive capacity 
E)  Over 45 TB of storage, with up to six small-form-factor 2.5-inch direct-attached drives per node

Question 18

What is the command to provide details pertaining to the state of the cluster?

Accepted Answer

A)  Show cluster 
B)  Show cluster extended-state 
C)  Show cluster state 
D)  Show extended cluster state 
A)  Show cluster 
B)  Show cluster extended-state 
C)  Show cluster state 
D)  Show extended cluster state

Question 19

Which supervisor module is supported by a Cisco Nexus 7700 Series Switch?

Accepted Answer

A)  first-generation supervisor module 
B)  second-generation supervisor module (Sup2) 
C)  second-generation supervisor enhanced module (Sup2
E)  
D)  third-generation supervisor enhanced module (Sup3
E)  
A)  first-generation supervisor module 
B)  second-generation supervisor module (Sup2) 
C)  second-generation supervisor enhanced module (Sup2
E)  
D)  third-generation supervisor enhanced module (Sup3
E)

Question 20

Which two statements are true about system controllers of Cisco Nexus 9500 Series? (Choose two.)

Accepted Answer

A)  They provide centralized arbitration to the system fabric for all line cards. 
B)  They control the Layer 2 and Layer 3 services. 
C)  The Cisco Nexus 9500 Series switch software, Enhanced NX-OS, runs on the system controllers. 
D)  They are used to offload the internal non-data-path switching and management functions from the supervisor engines. 
E)  The Cisco Nexus 9500 Series supports redundant system controllers. 
A)  They provide centralized arbitration to the system fabric for all line cards. 
B)  They control the Layer 2 and Layer 3 services. 
C)  The Cisco Nexus 9500 Series switch software, Enhanced NX-OS, runs on the system controllers. 
D)  They are used to offload the internal non-data-path switching and management functions from the supervisor engines. 
E)  The Cisco Nexus 9500 Series supports redundant system controllers.

Exam 1: Supporting Cisco Data Center System Devices (DCTECH)

Which command-line interface mode is best described by this prompt? UCS-switch-A (nxos)#

Refer to the exhibit. Which item does C represent?

Which Cisco Nexus 5000 Series model supports 1/10G BASE-T ports?

Refer to the exhibit. Which item does B represent?

With which data center type can a company lease the equipment and infrastructure?

Refer to the exhibit. What item does 6 represent?

Which tool is needed when servicing a UCS M5 server?

Which tool is needed when servicing a UCS M5 server?

In the Cisco UCS S3260 Storage Server which two of the below ports are available on a System I/O Controller? (Choose two.)

Which two types of information does the show module NX-OS command display? (Choose two.)

How many 10GBASE-T port licenses are preinstalled on a Cisco Nexus 3064-32T?

Which two cable types can support 10Gbps speed? (Choose two.)

Which three troubleshooting procedures do you perform when there is no power to a Cisco UCS B250 M2 Blade Server? (Choose three.)

Which type of optics module is supported by a Cisco Nexus 7700 F4-Series 30-Port 100-Gigabit Ethernet Module?

Which type of optics module is supported by a 6-port 40 GE Cisco Nexus 7000 M2 Series I/O module?

Refer to the exhibit. Which item does A represent?

Which two statements are true about the Cisco UCS C4200 Rack server and UCS C125 M5 compute node? (Choose two.)

What is the command to provide details pertaining to the state of the cluster?

Which supervisor module is supported by a Cisco Nexus 7700 Series Switch?

Which two statements are true about system controllers of Cisco Nexus 9500 Series? (Choose two.)

Cisco Certified Technician Routing & Switching (RSTECH)

Understanding Cisco Cybersecurity Operations Fundamentals (CBROPS)

Cisco Certified Network Associate (CCNA)

Managing Industrial Networks with Cisco Networking Technologies (IMINS)

DevNet Associate (DEVASC)

Conducting Forensic Analysis and Incident Response Using Cisco CyberOps Technologies (CBRFIR)

Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)

Implementing Cisco SD-WAN Solutions (ENSDWI)

Designing Cisco Enterprise Networks (ENSLD)

Designing Cisco Enterprise Wireless Networks (300-425 ENWLSD)

Implementing Cisco Enterprise Wireless Networks (300-430 ENWLSI)

Automating Cisco Enterprise Solutions (ENAUTO)

Implementing Cisco Service Provider Advanced Routing Solutions (SPRI)

Implementing Cisco Service Provider VPN Services (SPVI)

Designing Cisco Data Center Infrastructure (DCID)

Troubleshooting Cisco Data Center Infrastructure (DCIT)

Implementing Cisco Application Centric Infrastructure (DCACI)

Configuring Cisco MDS 9000 Series Switches (DCSAN)

Implementing Cisco Application Centric Infrastructure - Advanced

Automating Cisco Data Center Solutions (DCAUTO)

Securing Networks with Cisco Firepower (300-710 SNCF)

Implementing and Configuring Cisco Identity Services Engine (300-715 SISE)

Securing Email with Cisco Email Security Appliance (300-720 SESA)

Securing the Web with Cisco Web Security Appliance (300-725 SWSA)

Implementing Secure Solutions with Virtual Private Networks (SVPN 300-730)

Automating Cisco Security Solutions (SAUTO)

Implementing Cisco Collaboration Applications (CLICA)

Implementing Cisco Advanced Call Control and Mobility Services (CLASSM)

Implementing Cisco Collaboration Cloud and Edge Solutions

Implementing Cisco Collaboration Conferencing

Automating Cisco Collaboration Solutions (CLAUTO)

Implementing DevOps Solutions and Practices using Cisco Platforms (DEVOPS)

Developing Solutions Using Cisco IoT and Edge Platforms (DEVIOT)

Developing Applications for Cisco Webex and Webex Devices (DEVWBX)

Performing CyberOps Using Core Security Technologies (CBRCOR)

Implementing Cisco Enterprise Network Core Technologies (ENCOR)

Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)

Implementing and Operating Cisco Data Center Core Technologies (DCCOR)

Implementing and Operating Cisco Security Core Technologies

Implementing Cisco Collaboration Core Technologies (CLCOR)

Developing Applications using Cisco Core Platforms and APIs (DEVCOR)

CCDE Design Written

Deploying Cisco Unified Contact Center Express

Cisco Meraki Solutions Specialist

Securing Cisco Networks with Sourcefire FireAMP Endpoints

Designing Cisco Unified Contact Center Enterprise (UCCED)

Implementing and Supporting Cisco Unified Contact Center Enterprise (UCCEIS)

Cisco Collaboration SaaS Authorization Exam

Cisco Security Architecture for System Engineers

Adopting The Cisco Business Architecture Approach (DTBAA)

Cisco Customer Success Manager (CSM)

Mastering The Cisco Business Architecture Discipline (DTBAD)

Filters