Question 1

Which Ethernet to Cisco Fabric Interconnect connectivity configuration is supported when FCoE is implemented?

Accepted Answer

A)  VSS that has unified uplinks 
B)  Ethernet and unified ports on the same port channel 
C)  vPC that has unified uplinks 
D)  cross-connections with pinning 
A)  VSS that has unified uplinks 
B)  Ethernet and unified ports on the same port channel 
C)  vPC that has unified uplinks 
D)  cross-connections with pinning

Question 2

An engineer designs a Cisco UCS solution that must provide guaranteed and deterministic bandwidth to a specific server in the environment. The solution must apply to network and storage traffic of C-Series and B-Series servers. Which solution should be included to meet these requirements?

Accepted Answer

A)  Pin the vNICs and the vHBAs of the service profile to dedicated uplink ports. 
B)  Pin the IOM ports of the service profile to dedicated server ports. 
C)  Pin the server ports of the service profile to dedicated uplink ports. 
D)  Pin the vNICs and vHBAs of the service profile to dedicated server ports. 
A)  Pin the vNICs and the vHBAs of the service profile to dedicated uplink ports. 
B)  Pin the IOM ports of the service profile to dedicated server ports. 
C)  Pin the server ports of the service profile to dedicated uplink ports. 
D)  Pin the vNICs and vHBAs of the service profile to dedicated server ports.

Question 3

A cloud service provider is managing day-2 operations of over 200 blade servers installed in the Cisco UCS environment. This pool of network resources is providing virtual networks to their customers. To successfully operate this environment, frequent changes to vNICs and other operational policies are required across multiple UCS domains. The operations team must streamline these repetitive tasks. Which orchestration tool must be used to meet this requirement?

Accepted Answer

A)  Cisco ACI Multisite Orchestrator 
B)  Cisco DAN Center 
C)  Cisco UCS Director 
D)  Cisco UCS Manager 
A)  Cisco ACI Multisite Orchestrator 
B)  Cisco DAN Center 
C)  Cisco UCS Director 
D)  Cisco UCS Manager

Question 4

An engineer finishes the initial set up of a VXLAN EVPN network. The engineer is asked to plan for external connectivity that supports redundancy and extends multiple virtual routing and forwarding domains. The requirement is to use the same default gateway addressing across all leaf switches that belong to the VXLAN network. Which two solutions must be used to meet these requirements? (Choose two.)

Accepted Answer

A)  Distributed Anycast Gateway 
B)  VRF-Lite 
C)  Inter-Site Network 
D)  DC Interconnect 
E)  Spanning Tree Protocol 
A)  Distributed Anycast Gateway 
B)  VRF-Lite 
C)  Inter-Site Network 
D)  DC Interconnect 
E)  Spanning Tree Protocol

Question 5

What are two functions of a Network Services Orchestrator in an NFV environment? (Choose two.)

Accepted Answer

A)  It operates at the resource-facing services layer and provides overall lifecycle management at the network service level. 
B)  It provides an API-based northbound interface for transparent integration with systems that operate at the resource-facing services layer. 
C)  It provides a standards-based southbound interface for transparent integration with systems that operate at the customer-facing services layer. 
D)  It provides a standards-based northbound interface for transparent integration with systems that operate at the customer-facing services layer. 
E)  It operates at the customer-facing services layer and provides the management interface for the virtual network devices. 
A)  It operates at the resource-facing services layer and provides overall lifecycle management at the network service level. 
B)  It provides an API-based northbound interface for transparent integration with systems that operate at the resource-facing services layer. 
C)  It provides a standards-based southbound interface for transparent integration with systems that operate at the customer-facing services layer. 
D)  It provides a standards-based northbound interface for transparent integration with systems that operate at the customer-facing services layer. 
E)  It operates at the customer-facing services layer and provides the management interface for the virtual network devices.

Question 6

Which approach splits a pair of clustered fabric interconnects into two standalone devices?

Accepted Answer

A)  Run the disable fips-mode command on each fabric interconnect. Run the disable fips-mode command on each fabric interconnect. 
B)  Run the connect local-management command on each fabric interconnect. connect local-management 
C)  Erase the configuration of both fabric interconnects. 
D)  Unplug the Layer 1 and Layer 2 interfaces between the devices. 
A)  Run the disable fips-mode command on each fabric interconnect. Run the disable fips-mode command on each fabric interconnect. 
B)  Run the connect local-management command on each fabric interconnect. connect local-management 
C)  Erase the configuration of both fabric interconnects. 
D)  Unplug the Layer 1 and Layer 2 interfaces between the devices.

Question 7

Which multicast rendezvous point redundancy mode is valid for Bidirectional PIM?

Accepted Answer

A)  Embedded RP 
B)  Phantom RP 
C)  MSDP 
D)  PIM anycast RP 
A)  Embedded RP 
B)  Phantom RP 
C)  MSDP 
D)  PIM anycast RP

Question 8

A customer requires a tool to manage Cisco network hardware. The solution must use secure communication using a secure network protocol, support the use of declarative language to manage the state of resources, and periodically pull changes to the controlled nodes. Which tool meets these requirements?

Accepted Answer

A)  Ansible 
B)  SaltStack 
C)  Puppet 
D)  Nomir 
A)  Ansible 
B)  SaltStack 
C)  Puppet 
D)  Nomir

Question 9

An engineer must secure the payload traversing across the DCI. The solution must support confidentiality and integrity and it must be open standard. The solution must encrypt Ethernet frames regardless of the upper layer protocol used. Which technology must be used to support these requirements?

Accepted Answer

A)  GRE 
B)  OTV 
C)  MACsec 
D)  IPsec 
A)  GRE 
B)  OTV 
C)  MACsec 
D)  IPsec

Question 10

An engineer is implementing management access to a Cisco Nexus platform. The customer requires a solution that provides isolation between the data and control planes, in addition to management that uses encryption and authentication. The customer will manage the device using both IPv4 and IPv6. Which two components should be used to meet these requirements? (Choose two.)

Accepted Answer

A)  mgmt0 interface 
B)  SSH protocol 
C)  SNMP 
D)  SVI interface 
E)  Telnet protocol 
A)  mgmt0 interface 
B)  SSH protocol 
C)  SNMP 
D)  SVI interface 
E)  Telnet protocol

Question 11

Which two vSphere features must be included in the design of a Cisco HyperFlex systems stretched cluster? (Choose two.)

Accepted Answer

A)  HA 
B)  VSS 
C)  FT 
D)  VDP 
E)  DRS 
A)  HA 
B)  VSS 
C)  FT 
D)  VDP 
E)  DRS

Question 12

Which orchestration tool provides a graphical interface to manage LAN and SAN fabrics?

Accepted Answer

A)  Cisco Virtual Topology System 
B)  Cisco Data Center Network Manager 
C)  Cisco Nexus Fabric Manager 
D)  Cisco CloudCenter 
A)  Cisco Virtual Topology System 
B)  Cisco Data Center Network Manager 
C)  Cisco Nexus Fabric Manager 
D)  Cisco CloudCenter

Question 13

What is an advantage of Cisco HyperFlex Edge as compared to Cisco HyperFlex Standard Clusters?

Accepted Answer

A)  Cisco Intersight automatically creates an invisible cloud witness. 
B)  Cisco UCS 5108 Blade Server chassis provides SEEPROM connectivity to solve split-brain scenarios. 
C)  Cisco UCS Manager provides service profile portability across nodes. 
D)  Cisco HyperFlex Edge provides native container support through the KVM hypervisor. 
A)  Cisco Intersight automatically creates an invisible cloud witness. 
B)  Cisco UCS 5108 Blade Server chassis provides SEEPROM connectivity to solve split-brain scenarios. 
C)  Cisco UCS Manager provides service profile portability across nodes. 
D)  Cisco HyperFlex Edge provides native container support through the KVM hypervisor.

Question 14

An engineer wants to eliminate the manual process of checking the system hardware and firmware against a specified hardware compatibility tool. The tool must be able to manage an extensive list of devices including Cisco HyperFlex, MDS, and Nexus switches. The tool must manage hardware in multiple data centers so it should be deployed on public cloud infrastructure. Which tool meets these requirements?

Accepted Answer

A)  Cisco Tetration 
B)  Cisco Data Center Network Manager 
C)  Cisco UCS Director 
D)  Cisco Intersight 
A)  Cisco Tetration 
B)  Cisco Data Center Network Manager 
C)  Cisco UCS Director 
D)  Cisco Intersight

Question 15

Which orchestration tool should be used for the management and analytics of servers across multiple sites?

Accepted Answer

A)  Cisco Intersight 
B)  Cisco Nexus Fabric Manager 
C)  Cisco UCS Manager 
D)  Cisco Data Center Network Manager 
A)  Cisco Intersight 
B)  Cisco Nexus Fabric Manager 
C)  Cisco UCS Manager 
D)  Cisco Data Center Network Manager

Question 16

Refer to the exhibit.   What must be the default gateway of the servers in EPG Web?

Accepted Answer

A)  subnet address of BD1 
B)  subnet address of L3Out 
C)  subnet address of BD2 
D)  NAT appliance 
A)  subnet address of BD1 
B)  subnet address of L3Out 
C)  subnet address of BD2 
D)  NAT appliance

Question 17

A client in a commercial building installs a Cisco blade server in the multitenant Cisco UCS blade infrastructure. To cut operating costs, the client's data center is shared with other organizations. The client asks an engineer to prevent third parties from accessing their equipment and from accessing BIOS-related information when booting a server. Which two policies must be used to meet these requirements? (Choose two.)

Accepted Answer

A)  post error pause 
B)  CDN control 
C)  ASPM support 
D)  front panel lockout 
E)  quiet boot 
A)  post error pause 
B)  CDN control 
C)  ASPM support 
D)  front panel lockout 
E)  quiet boot

Question 18

A Cisco UCS instance has four interfaces on a UCS VIC. Where on the fabric interconnect does each interface terminate?

Accepted Answer

A)  vPC 
B)  virtual interface 
C)  port channel 
D)  physical port 
A)  vPC 
B)  virtual interface 
C)  port channel 
D)  physical port

Question 19

An engineer is designing a data center that uses FCIP. How is QoS configured in this environment?

Accepted Answer

A)  A separate DSCP value and CoPP must be configured for all FCIP traffic and another for all of the FCIP frames in the data connection. 
B)  A separate DSCP value must be configured for all FCIP VSAN traffic. 
C)  A separate DSCP value and priority queuing must be configured for all FCIP traffic. 
D)  Two separate DSCP values must be configured, one of all of the FCIP frames in the control TCP connection and another for all of the FCIP frames in the data connection. 
A)  A separate DSCP value and CoPP must be configured for all FCIP traffic and another for all of the FCIP frames in the data connection. 
B)  A separate DSCP value must be configured for all FCIP VSAN traffic. 
C)  A separate DSCP value and priority queuing must be configured for all FCIP traffic. 
D)  Two separate DSCP values must be configured, one of all of the FCIP frames in the control TCP connection and another for all of the FCIP frames in the data connection.

Question 20

An engineer must logically partition two Cisco Nexus 7000 Series Switches into two environments called Test_39919596 and Production_59423879. The environments must use only F2-Series line cards and be limited to a maximum of 265 port-channels. Which Cisco Nexus feature must be used?

Accepted Answer

A)  vPC 
B)  VDC 
C)  vFC 
D)  VRF 
A)  vPC 
B)  VDC 
C)  vFC 
D)  VRF

Exam 17: Troubleshooting Cisco Data Center Infrastructure (DCIT)

Which Ethernet to Cisco Fabric Interconnect connectivity configuration is supported when FCoE is implemented?

An engineer designs a Cisco UCS solution that must provide guaranteed and deterministic bandwidth to a specific server in the environment. The solution must apply to network and storage traffic of C-Series and B-Series servers. Which solution should be included to meet these requirements?

What are two functions of a Network Services Orchestrator in an NFV environment? (Choose two.)

Which approach splits a pair of clustered fabric interconnects into two standalone devices?

Which multicast rendezvous point redundancy mode is valid for Bidirectional PIM?

An engineer must secure the payload traversing across the DCI. The solution must support confidentiality and integrity and it must be open standard. The solution must encrypt Ethernet frames regardless of the upper layer protocol used. Which technology must be used to support these requirements?

Which two vSphere features must be included in the design of a Cisco HyperFlex systems stretched cluster? (Choose two.)

Which orchestration tool provides a graphical interface to manage LAN and SAN fabrics?

What is an advantage of Cisco HyperFlex Edge as compared to Cisco HyperFlex Standard Clusters?

Which orchestration tool should be used for the management and analytics of servers across multiple sites?

Refer to the exhibit. What must be the default gateway of the servers in EPG Web?

A Cisco UCS instance has four interfaces on a UCS VIC. Where on the fabric interconnect does each interface terminate?

An engineer is designing a data center that uses FCIP. How is QoS configured in this environment?

An engineer must logically partition two Cisco Nexus 7000 Series Switches into two environments called Test_39919596 and Production_59423879. The environments must use only F2-Series line cards and be limited to a maximum of 265 port-channels. Which Cisco Nexus feature must be used?

Supporting Cisco Data Center System Devices (DCTECH)

Cisco Certified Technician Routing & Switching (RSTECH)

Understanding Cisco Cybersecurity Operations Fundamentals (CBROPS)

Cisco Certified Network Associate (CCNA)

Managing Industrial Networks with Cisco Networking Technologies (IMINS)

DevNet Associate (DEVASC)

Conducting Forensic Analysis and Incident Response Using Cisco CyberOps Technologies (CBRFIR)

Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)

Implementing Cisco SD-WAN Solutions (ENSDWI)

Designing Cisco Enterprise Networks (ENSLD)

Designing Cisco Enterprise Wireless Networks (300-425 ENWLSD)

Implementing Cisco Enterprise Wireless Networks (300-430 ENWLSI)

Automating Cisco Enterprise Solutions (ENAUTO)

Implementing Cisco Service Provider Advanced Routing Solutions (SPRI)

Implementing Cisco Service Provider VPN Services (SPVI)

Designing Cisco Data Center Infrastructure (DCID)

Implementing Cisco Application Centric Infrastructure (DCACI)

Configuring Cisco MDS 9000 Series Switches (DCSAN)

Implementing Cisco Application Centric Infrastructure - Advanced

Automating Cisco Data Center Solutions (DCAUTO)

Securing Networks with Cisco Firepower (300-710 SNCF)

Implementing and Configuring Cisco Identity Services Engine (300-715 SISE)

Securing Email with Cisco Email Security Appliance (300-720 SESA)

Securing the Web with Cisco Web Security Appliance (300-725 SWSA)

Implementing Secure Solutions with Virtual Private Networks (SVPN 300-730)

Automating Cisco Security Solutions (SAUTO)

Implementing Cisco Collaboration Applications (CLICA)

Implementing Cisco Advanced Call Control and Mobility Services (CLASSM)

Implementing Cisco Collaboration Cloud and Edge Solutions

Implementing Cisco Collaboration Conferencing

Automating Cisco Collaboration Solutions (CLAUTO)

Implementing DevOps Solutions and Practices using Cisco Platforms (DEVOPS)

Developing Solutions Using Cisco IoT and Edge Platforms (DEVIOT)

Developing Applications for Cisco Webex and Webex Devices (DEVWBX)

Performing CyberOps Using Core Security Technologies (CBRCOR)

Implementing Cisco Enterprise Network Core Technologies (ENCOR)

Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)

Implementing and Operating Cisco Data Center Core Technologies (DCCOR)

Implementing and Operating Cisco Security Core Technologies

Implementing Cisco Collaboration Core Technologies (CLCOR)

Developing Applications using Cisco Core Platforms and APIs (DEVCOR)

CCDE Design Written

Deploying Cisco Unified Contact Center Express

Cisco Meraki Solutions Specialist

Securing Cisco Networks with Sourcefire FireAMP Endpoints

Designing Cisco Unified Contact Center Enterprise (UCCED)

Implementing and Supporting Cisco Unified Contact Center Enterprise (UCCEIS)

Cisco Collaboration SaaS Authorization Exam

Cisco Security Architecture for System Engineers

Adopting The Cisco Business Architecture Approach (DTBAA)

Cisco Customer Success Manager (CSM)

Mastering The Cisco Business Architecture Discipline (DTBAD)

Filters