Question 1

What is a step in the SAML SSO process?

Accepted Answer

A)  The IdP redirects the SAML response to the browser. 
B)  The LDAP server extracts the assertion. 
C)  The service provider issues an authentication challenge to the browser. 
D)  The browser issues an HTTPS POST request to the IdP. 
A)  The IdP redirects the SAML response to the browser. 
B)  The LDAP server extracts the assertion. 
C)  The service provider issues an authentication challenge to the browser. 
D)  The browser issues an HTTPS POST request to the IdP.

Question 2

Which statement describes a role of AXL communications in the BLF Plug-in Service of the Cisco Unified Attendant Console?

Accepted Answer

A)  The AXL communications allow registered attendants to log in to Cisco Unified Communications Manager and receive calls. 
B)  The AXL communications enable Device Resolution Manager to resolve the device statuses of operator and system devices. 
C)  The AXL communications is required after installation to verify that the specified CTI manager or managers and Cisco Unified Attendant Console versions match. 
D)  The AXL communications is required after installation to verify that the specified CTI manager or managers and Cisco Unified CM versions. 
A)  The AXL communications allow registered attendants to log in to Cisco Unified Communications Manager and receive calls. 
B)  The AXL communications enable Device Resolution Manager to resolve the device statuses of operator and system devices. 
C)  The AXL communications is required after installation to verify that the specified CTI manager or managers and Cisco Unified Attendant Console versions match. 
D)  The AXL communications is required after installation to verify that the specified CTI manager or managers and Cisco Unified CM versions.

Question 3

How is automatic fallback enabled on a Cisco IM and Presence server?

Accepted Answer

A)  In IM and Presence Service Parameter Configuration > Cisco Server Recovery Manager, change the Failover parameter to True. 
B)  In Communications Manager Service Parameter Configuration > Cisco Server Recovery Manager, change the Enable Automatic Fallback parameter to True. 
C)  Automatic fallback is enabled by default. 
D)  In the Presence Redundancy Group Configuration > Cisco Unified Communications Manager, check the Enable Automatic Fallback parameter. 
A)  In IM and Presence Service Parameter Configuration > Cisco Server Recovery Manager, change the Failover parameter to True. 
B)  In Communications Manager Service Parameter Configuration > Cisco Server Recovery Manager, change the Enable Automatic Fallback parameter to True. 
C)  Automatic fallback is enabled by default. 
D)  In the Presence Redundancy Group Configuration > Cisco Unified Communications Manager, check the Enable Automatic Fallback parameter.

Question 4

What are two authentication mechanisms for identity provider authentication? (Choose two.)

Accepted Answer

A)  UID 
B)  PKI/CAC 
C)  ACS 
D)  password only 
E)  Kerberos 
A)  UID 
B)  PKI/CAC 
C)  ACS 
D)  password only 
E)  Kerberos

Question 5

An engineer is configuring a remote Cisco IM and Presence Service and needs to ensure that users can communicate across clusters in the same domain and receive presence status. Which protocol should be used to accomplish this task?

Accepted Answer

A)  LDAP 
B)  AXL/SOAP 
C)  DNS 
D)  XMPP 
A)  LDAP 
B)  AXL/SOAP 
C)  DNS 
D)  XMPP

Question 6

What is the maximum number of Cisco Unity Connection locations connected in a HTTPS network?

Accepted Answer

A)  50 
B)  25 
C)  200 
D)  10 
A)  50 
B)  25 
C)  200 
D)  10

Question 7

Which SAML 2.0 profile is supported by Cisco UCM, Cisco Unified IM and Presence, and Unity Connection version 10.x and above?

Accepted Answer

A)  name identifier management 
B)  identity provider discovery 
C)  single logout 
D)  web browser SSO 
A)  name identifier management 
B)  identity provider discovery 
C)  single logout 
D)  web browser SSO

Question 8

A customer is using Cisco Unified IM and Presence with high availability and has reported that their primary node is not providing any IM and Presence services. What is causing this issue?

Accepted Answer

A)  The presence redundancy group node state of the primary node is "idle". 
B)  The presence redundancy group node state of the peer node is "normal". 
C)  The presence redundancy group node state of the primary node is "initializing". 
D)  The presence redundancy group node state of the peer node is "running in backup mode". 
A)  The presence redundancy group node state of the primary node is "idle". 
B)  The presence redundancy group node state of the peer node is "normal". 
C)  The presence redundancy group node state of the primary node is "initializing". 
D)  The presence redundancy group node state of the peer node is "running in backup mode".

Question 9

Which two SSO features are true? (Choose two.)

Accepted Answer

A)  allows Jabber to use LDAP directory services for contact imports 
B)  allows LDAP user import on Cisco Unified Communications Manager 
C)  improves productivity by reducing time spent re-entering credentials for the same identity 
D)  transfers the authentication from the system that hosts the applications to a third-party system 
E)  reduces costs by decreasing the number of help calls that are made for voicemail PIN resets 
A)  allows Jabber to use LDAP directory services for contact imports 
B)  allows LDAP user import on Cisco Unified Communications Manager 
C)  improves productivity by reducing time spent re-entering credentials for the same identity 
D)  transfers the authentication from the system that hosts the applications to a third-party system 
E)  reduces costs by decreasing the number of help calls that are made for voicemail PIN resets

Question 10

Refer to the exhibit.   An administrator is troubleshooting an issue with XMPP Federation between two, eight-node IM and Presence clusters. After looking at the logs, the administrator finds this message and must publish one or more DNS SRV records containing one or more addresses of the IM and Presence node(s). How many nodes must be selected to publish?

Accepted Answer

A)  1 
B)  5 
C)  10 
D)  20 
A)  1 
B)  5 
C)  10 
D)  20

Question 11

Refer to the exhibit.   After configuration of the Cisco IM&P cluster in high-availability mode, both IM&P servers remain in the initializing state. Which two actions ensure normal operations of this IM&P high-availability cluster? (Choose two.)

Accepted Answer

A)  Clear the Enable High Availability check box in the Presence Redundancy Group configuration. 
B)  Confirm that Cisco Presence Engine, Cisco XCP Router, and Cisco DB services are up and running on both IM&P servers. 
C)  Restart the Server Recovery Manager service in Cisco Unified Serviceability - Network Services on both IM&P servers. 
D)  Verify that the Cisco XCP SIP Federation Connection Manager service is running. 
E)  Ensure that an equal number of users are assigned to each IM&P server. 
A)  Clear the Enable High Availability check box in the Presence Redundancy Group configuration. 
B)  Confirm that Cisco Presence Engine, Cisco XCP Router, and Cisco DB services are up and running on both IM&P servers. 
C)  Restart the Server Recovery Manager service in Cisco Unified Serviceability - Network Services on both IM&P servers. 
D)  Verify that the Cisco XCP SIP Federation Connection Manager service is running. 
E)  Ensure that an equal number of users are assigned to each IM&P server.

Question 12

Digital networking is configured between two Cisco Unity Connection clusters using an HTTPS connection. Which two objects are replicated between these two clusters? (Choose two.)

Accepted Answer

A)  partitions and search spaces 
B)  user greetings 
C)  user templates and user greetings 
D)  call handlers 
E)  users and their corresponding mailboxes 
A)  partitions and search spaces 
B)  user greetings 
C)  user templates and user greetings 
D)  call handlers 
E)  users and their corresponding mailboxes

Question 13

An engineer must configure a test user mailbox in a newly deployed Cisco Unity Express module. Which console command set reflects the correct configuration in this scenario?

Accepted Answer

A)    
B)    
C)    
D)    
A)    
B)    
C)    
D)

Question 14

In Digital Network Cisco Unity Connection clusters, each site transmits and receives messages for the recipients based on which protocol?

Accepted Answer

A)  SMTP 
B)  IMAP 
C)  SCCP 
D)  SIP 
A)  SMTP 
B)  IMAP 
C)  SCCP 
D)  SIP

Question 15

Secure XMPP communication is required for XMPP federation with external domains and the Cisco IM and Presence. Which certificate is used for XMPP interdomain federation when connecting to an externally federated domain?

Accepted Answer

A)  cup 
B)  cup-xmpp 
C)  cup-xmpp-s2s 
D)  Tomcat 
A)  cup 
B)  cup-xmpp 
C)  cup-xmpp-s2s 
D)  Tomcat

Question 16

Refer to the exhibit.   Users report that they are prompted to accept server certificates when they initially run Cisco Jabber. An engineer removes these prompts to prevent confusion. Which statement about this scenario is true?

Accepted Answer

A)  Presentation of the certificates can be disabled by setting up Cisco IM&P servers into nonsecure mode. 
B)  Nothing can be done to resolve this issue because certificates must be accepted by each Jabber user, per Cisco policy. 
C)  These certificates are self-signed certificates, so they must be added manually to the user OS certificate stores. 
D)  The behavior is a security breach because certificates are considered untrusted and as not coming from Cisco Collaboration servers. 
A)  Presentation of the certificates can be disabled by setting up Cisco IM&P servers into nonsecure mode. 
B)  Nothing can be done to resolve this issue because certificates must be accepted by each Jabber user, per Cisco policy. 
C)  These certificates are self-signed certificates, so they must be added manually to the user OS certificate stores. 
D)  The behavior is a security breach because certificates are considered untrusted and as not coming from Cisco Collaboration servers.

Question 17

Refer to the exhibit.   The associated directory number is configured with Call Forward All to voicemail in Cisco UCM. When users call the directory number, they hear the opening greeting. Which action should be taken to correct this issue?

Accepted Answer

A)  Modify the Calling Number to 3005. 
B)  Modify the Call Forward All to the voicemail pilot. 
C)  Modify the Dialed Number condition from "Equals" to "In". 
D)  Modify the rule to a Forward Routing Rule. 
A)  Modify the Calling Number to 3005. 
B)  Modify the Call Forward All to the voicemail pilot. 
C)  Modify the Dialed Number condition from "Equals" to "In". 
D)  Modify the rule to a Forward Routing Rule.

Question 18

Which two child elements can be in an XMPP message stanza? (Choose two.)

Accepted Answer

A) B) C) D) E) A) B) C) D) E)

Question 19

Refer to the exhibit.   An engineer is troubleshooting operational performance in the network. Which action should be taken to restore high availability in this subcluster?

Accepted Answer

A)  Go to "Presence Redundancy Group Configuration" on the Cisco UCM Administration page and select the Fallback button. 
B)  Go to "Presence User Assignment" on the Cisco UCM Administration page and select "rebalance users" for all users. 
C)  Start all critical services on the second node, and select the Fallback button in the "Presence Redundancy Group Configuration". 
D)  Start all critical services on both nodes and select "rebalance users" in the "Presence User Assignment". 
A)  Go to "Presence Redundancy Group Configuration" on the Cisco UCM Administration page and select the Fallback button. 
B)  Go to "Presence User Assignment" on the Cisco UCM Administration page and select "rebalance users" for all users. 
C)  Start all critical services on the second node, and select the Fallback button in the "Presence Redundancy Group Configuration". 
D)  Start all critical services on both nodes and select "rebalance users" in the "Presence User Assignment".

Question 20

What is the primary mechanism in Cisco Unity Connection that is used for toll fraud prevention?

Accepted Answer

A)  restriction tables 
B)  fraud tables 
C)  transfer rules 
D)  calling search spaces 
A)  restriction tables 
B)  fraud tables 
C)  transfer rules 
D)  calling search spaces

Exam 29: Implementing Cisco Advanced Call Control and Mobility Services (CLASSM)

What is a step in the SAML SSO process?

Which statement describes a role of AXL communications in the BLF Plug-in Service of the Cisco Unified Attendant Console?

How is automatic fallback enabled on a Cisco IM and Presence server?

What are two authentication mechanisms for identity provider authentication? (Choose two.)

An engineer is configuring a remote Cisco IM and Presence Service and needs to ensure that users can communicate across clusters in the same domain and receive presence status. Which protocol should be used to accomplish this task?

What is the maximum number of Cisco Unity Connection locations connected in a HTTPS network?

Which SAML 2.0 profile is supported by Cisco UCM, Cisco Unified IM and Presence, and Unity Connection version 10.x and above?

A customer is using Cisco Unified IM and Presence with high availability and has reported that their primary node is not providing any IM and Presence services. What is causing this issue?

Which two SSO features are true? (Choose two.)

Refer to the exhibit. After configuration of the Cisco IM&P cluster in high-availability mode, both IM&P servers remain in the initializing state. Which two actions ensure normal operations of this IM&P high-availability cluster? (Choose two.)

Digital networking is configured between two Cisco Unity Connection clusters using an HTTPS connection. Which two objects are replicated between these two clusters? (Choose two.)

An engineer must configure a test user mailbox in a newly deployed Cisco Unity Express module. Which console command set reflects the correct configuration in this scenario?

In Digital Network Cisco Unity Connection clusters, each site transmits and receives messages for the recipients based on which protocol?

Secure XMPP communication is required for XMPP federation with external domains and the Cisco IM and Presence. Which certificate is used for XMPP interdomain federation when connecting to an externally federated domain?

Refer to the exhibit. Users report that they are prompted to accept server certificates when they initially run Cisco Jabber. An engineer removes these prompts to prevent confusion. Which statement about this scenario is true?

Refer to the exhibit. The associated directory number is configured with Call Forward All to voicemail in Cisco UCM. When users call the directory number, they hear the opening greeting. Which action should be taken to correct this issue?

Which two child elements can be in an XMPP message stanza? (Choose two.)

Refer to the exhibit. An engineer is troubleshooting operational performance in the network. Which action should be taken to restore high availability in this subcluster?

What is the primary mechanism in Cisco Unity Connection that is used for toll fraud prevention?

Supporting Cisco Data Center System Devices (DCTECH)

Cisco Certified Technician Routing & Switching (RSTECH)

Understanding Cisco Cybersecurity Operations Fundamentals (CBROPS)

Cisco Certified Network Associate (CCNA)

Managing Industrial Networks with Cisco Networking Technologies (IMINS)

DevNet Associate (DEVASC)

Conducting Forensic Analysis and Incident Response Using Cisco CyberOps Technologies (CBRFIR)

Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)

Implementing Cisco SD-WAN Solutions (ENSDWI)

Designing Cisco Enterprise Networks (ENSLD)

Designing Cisco Enterprise Wireless Networks (300-425 ENWLSD)

Implementing Cisco Enterprise Wireless Networks (300-430 ENWLSI)

Automating Cisco Enterprise Solutions (ENAUTO)

Implementing Cisco Service Provider Advanced Routing Solutions (SPRI)

Implementing Cisco Service Provider VPN Services (SPVI)

Designing Cisco Data Center Infrastructure (DCID)

Troubleshooting Cisco Data Center Infrastructure (DCIT)

Implementing Cisco Application Centric Infrastructure (DCACI)

Configuring Cisco MDS 9000 Series Switches (DCSAN)

Implementing Cisco Application Centric Infrastructure - Advanced

Automating Cisco Data Center Solutions (DCAUTO)

Securing Networks with Cisco Firepower (300-710 SNCF)

Implementing and Configuring Cisco Identity Services Engine (300-715 SISE)

Securing Email with Cisco Email Security Appliance (300-720 SESA)

Securing the Web with Cisco Web Security Appliance (300-725 SWSA)

Implementing Secure Solutions with Virtual Private Networks (SVPN 300-730)

Automating Cisco Security Solutions (SAUTO)

Implementing Cisco Collaboration Applications (CLICA)

Implementing Cisco Collaboration Cloud and Edge Solutions

Implementing Cisco Collaboration Conferencing

Automating Cisco Collaboration Solutions (CLAUTO)

Implementing DevOps Solutions and Practices using Cisco Platforms (DEVOPS)

Developing Solutions Using Cisco IoT and Edge Platforms (DEVIOT)

Developing Applications for Cisco Webex and Webex Devices (DEVWBX)

Performing CyberOps Using Core Security Technologies (CBRCOR)

Implementing Cisco Enterprise Network Core Technologies (ENCOR)

Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)

Implementing and Operating Cisco Data Center Core Technologies (DCCOR)

Implementing and Operating Cisco Security Core Technologies

Implementing Cisco Collaboration Core Technologies (CLCOR)

Developing Applications using Cisco Core Platforms and APIs (DEVCOR)

CCDE Design Written

Deploying Cisco Unified Contact Center Express

Cisco Meraki Solutions Specialist

Securing Cisco Networks with Sourcefire FireAMP Endpoints

Designing Cisco Unified Contact Center Enterprise (UCCED)

Implementing and Supporting Cisco Unified Contact Center Enterprise (UCCEIS)

Cisco Collaboration SaaS Authorization Exam

Cisco Security Architecture for System Engineers

Adopting The Cisco Business Architecture Approach (DTBAA)

Cisco Customer Success Manager (CSM)

Mastering The Cisco Business Architecture Discipline (DTBAD)

Filters