Question 1

Cisco Extension Mobility does not show up when the services button is pressed. What is the cause of the issue?

Accepted Answer

A)  The URL configured for Cisco Extension Mobility is not correct. 
B)  Cisco Extension Mobility Service is not running. 
C)  The phone is not subscribed to Cisco Extension Mobility Service. 
D)  Cisco Extension Mobility is not enabled in the Phone Configuration Window (Device > Phone) 
A)  The URL configured for Cisco Extension Mobility is not correct. 
B)  Cisco Extension Mobility Service is not running. 
C)  The phone is not subscribed to Cisco Extension Mobility Service. 
D)  Cisco Extension Mobility is not enabled in the Phone Configuration Window (Device > Phone)

Question 2

Refer to the exhibit. Outbound calls to the service provider cause intermittent errors due to a codec mismatch. The internal network sends early offer SDP that contains only G.711 A-law. The service provider reports that some destinations support only G.711 A-law while others support only iLBC. The service provider also allows only 20 active calls at a time. Which configuration allows successful media negotiation for all calls using outbound dial peers 5002 and 5003?

Accepted Answer

A)  dial-peer voice 5002 voip codec g711alaw ilbc ! dial-peer voice 5003 voip 
B)  voice-class codec 101 offer-all 
C)  voice-class codec 101 
D)  codec g711alaw codec ilbc 
A)  dial-peer voice 5002 voip codec g711alaw ilbc ! dial-peer voice 5003 voip 
B)  voice-class codec 101 offer-all 
C)  voice-class codec 101 
D)  codec g711alaw codec ilbc

Question 3

Which two types of authentication are supported for the configuration of Intercluster Lookup Service? (Choose two.)

Accepted Answer

A)  TokenID 
B)  username and secret key 
C)  TLS certificates 
D)  passwords 
E)  FQDN of the servers defined in DNS 
A)  TokenID 
B)  username and secret key 
C)  TLS certificates 
D)  passwords 
E)  FQDN of the servers defined in DNS

Question 4

The Cisco Unified Communications Manager Dialed Number Analyzer allows analysis of calls from which two devices? (Choose two.)

Accepted Answer

A)  translation patterns 
B)  device pools 
C)  CTI ports 
D)  CTI route points 
E)  IP phones 
A)  translation patterns 
B)  device pools 
C)  CTI ports 
D)  CTI route points 
E)  IP phones

Question 5

Refer to the exhibit. Regions have been configured for all major branches based on the available circuit bandwidth. Some calls from Region A endpoints to Region B endpoints are failing to connect. How is the issue resolved?

Accepted Answer

A)  Update the calling search space for affected endpoints to none. 
B)  Update all regions to 8 kbps maximum audio bitrate. 
C)  Increase the number of available media termination points. 
D)  Add a media resource to transcode between available capabilities. 
A)  Update the calling search space for affected endpoints to none. 
B)  Update all regions to 8 kbps maximum audio bitrate. 
C)  Increase the number of available media termination points. 
D)  Add a media resource to transcode between available capabilities.

Question 6

Refer to the exhibit. An administrator is troubleshooting a problem in which some outbound calls from an internal network to the Internet telephony service provider are not getting connected, but some others connect successfully. The firewall team found that some call attempts on port 5060 came from an unrecognized IP that has not been defined in the firewall rule. What should the administrator configure in the Cisco Unified Border Element to fix this issue?

Accepted Answer

A)  use of port 5061 for SIP secure 
B)  access list allowing the firewall IP 
C)  bind signaling and media to the loopback interface 
D)  ip prefix-list to filter the unwanted IP address 
A)  use of port 5061 for SIP secure 
B)  access list allowing the firewall IP 
C)  bind signaling and media to the loopback interface 
D)  ip prefix-list to filter the unwanted IP address

Question 7

What are two configuration features of the Client Matter Code setting in the route pattern configuration? (Choose two.)

Accepted Answer

A)  The Client Matter Code feature does not support overlap sending since the Cisco UCM cannot determine when to prompt the user for the code. 
B)  Selecting the Allow Overlap Sending setting disables the Require Client Matter Code setting. 
C)  Selecting the Allow Overlap Sending setting allows a user to select the Require Client Matter Code setting. 
D)  The Client Matter Code feature supports overlap sending since the Cisco UCM can determine when to prompt the user for the code. 
E)  The Client Matter Code feature provides the option to configure Authorization Level such as in the Forced Authorization Code. 
A)  The Client Matter Code feature does not support overlap sending since the Cisco UCM cannot determine when to prompt the user for the code. 
B)  Selecting the Allow Overlap Sending setting disables the Require Client Matter Code setting. 
C)  Selecting the Allow Overlap Sending setting allows a user to select the Require Client Matter Code setting. 
D)  The Client Matter Code feature supports overlap sending since the Cisco UCM can determine when to prompt the user for the code. 
E)  The Client Matter Code feature provides the option to configure Authorization Level such as in the Forced Authorization Code.

Question 8

An IP Telephony administrator is deploying IP phones. The administrator has an existing Cisco UCME router with several SCCP & SIP phones registered. The administrator receives a request for a new SIP phone with MAC address 1111.2222.3333 and directory number 2050 to be added in the Cisco UCME. Which two configurations should be added in CME to support this request? (Choose two.)

Accepted Answer

A)    
B)    
C)    
D)    
E)    
A)    
B)    
C)    
D)    
E)

Question 9

A user in location X dials an extension at location Y. The call travels through a QoS-enabled WAN network, but the user experiences choppy or clipped audio. What is the cause of this issue?

Accepted Answer

A)  missing Call Admission Control 
B)  codec mismatch 
C)  ptime mismatch 
D)  phone class of service issue 
A)  missing Call Admission Control 
B)  codec mismatch 
C)  ptime mismatch 
D)  phone class of service issue

Question 10

An administrator is implementing a new dial-plan on Cisco Unified Border Element. The administrator must ensure that incoming dial-peers are matched based on the IP address from where the incoming request originates. Which dial-peer configuration should be applied to accomplish this requirement?

Accepted Answer

A)  dial-peer voice 1 voip incoming uri to 
B)  incoming called-number 
C)  incoming uri via 
D)  incoming uri request 
A)  dial-peer voice 1 voip incoming uri to 
B)  incoming called-number 
C)  incoming uri via 
D)  incoming uri request

Exam 30: Implementing Cisco Collaboration Cloud and Edge Solutions

Cisco Extension Mobility does not show up when the services button is pressed. What is the cause of the issue?

Which two types of authentication are supported for the configuration of Intercluster Lookup Service? (Choose two.)

The Cisco Unified Communications Manager Dialed Number Analyzer allows analysis of calls from which two devices? (Choose two.)

Refer to the exhibit. Regions have been configured for all major branches based on the available circuit bandwidth. Some calls from Region A endpoints to Region B endpoints are failing to connect. How is the issue resolved?

What are two configuration features of the Client Matter Code setting in the route pattern configuration? (Choose two.)

A user in location X dials an extension at location Y. The call travels through a QoS-enabled WAN network, but the user experiences choppy or clipped audio. What is the cause of this issue?

An administrator is implementing a new dial-plan on Cisco Unified Border Element. The administrator must ensure that incoming dial-peers are matched based on the IP address from where the incoming request originates. Which dial-peer configuration should be applied to accomplish this requirement?

Supporting Cisco Data Center System Devices (DCTECH)

Cisco Certified Technician Routing & Switching (RSTECH)

Understanding Cisco Cybersecurity Operations Fundamentals (CBROPS)

Cisco Certified Network Associate (CCNA)

Managing Industrial Networks with Cisco Networking Technologies (IMINS)

DevNet Associate (DEVASC)

Conducting Forensic Analysis and Incident Response Using Cisco CyberOps Technologies (CBRFIR)

Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)

Implementing Cisco SD-WAN Solutions (ENSDWI)

Designing Cisco Enterprise Networks (ENSLD)

Designing Cisco Enterprise Wireless Networks (300-425 ENWLSD)

Implementing Cisco Enterprise Wireless Networks (300-430 ENWLSI)

Automating Cisco Enterprise Solutions (ENAUTO)

Implementing Cisco Service Provider Advanced Routing Solutions (SPRI)

Implementing Cisco Service Provider VPN Services (SPVI)

Designing Cisco Data Center Infrastructure (DCID)

Troubleshooting Cisco Data Center Infrastructure (DCIT)

Implementing Cisco Application Centric Infrastructure (DCACI)

Configuring Cisco MDS 9000 Series Switches (DCSAN)

Implementing Cisco Application Centric Infrastructure - Advanced

Automating Cisco Data Center Solutions (DCAUTO)

Securing Networks with Cisco Firepower (300-710 SNCF)

Implementing and Configuring Cisco Identity Services Engine (300-715 SISE)

Securing Email with Cisco Email Security Appliance (300-720 SESA)

Securing the Web with Cisco Web Security Appliance (300-725 SWSA)

Implementing Secure Solutions with Virtual Private Networks (SVPN 300-730)

Automating Cisco Security Solutions (SAUTO)

Implementing Cisco Collaboration Applications (CLICA)

Implementing Cisco Advanced Call Control and Mobility Services (CLASSM)

Implementing Cisco Collaboration Conferencing

Automating Cisco Collaboration Solutions (CLAUTO)

Implementing DevOps Solutions and Practices using Cisco Platforms (DEVOPS)

Developing Solutions Using Cisco IoT and Edge Platforms (DEVIOT)

Developing Applications for Cisco Webex and Webex Devices (DEVWBX)

Performing CyberOps Using Core Security Technologies (CBRCOR)

Implementing Cisco Enterprise Network Core Technologies (ENCOR)

Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)

Implementing and Operating Cisco Data Center Core Technologies (DCCOR)

Implementing and Operating Cisco Security Core Technologies

Implementing Cisco Collaboration Core Technologies (CLCOR)

Developing Applications using Cisco Core Platforms and APIs (DEVCOR)

CCDE Design Written

Deploying Cisco Unified Contact Center Express

Cisco Meraki Solutions Specialist

Securing Cisco Networks with Sourcefire FireAMP Endpoints

Designing Cisco Unified Contact Center Enterprise (UCCED)

Implementing and Supporting Cisco Unified Contact Center Enterprise (UCCEIS)

Cisco Collaboration SaaS Authorization Exam

Cisco Security Architecture for System Engineers

Adopting The Cisco Business Architecture Approach (DTBAA)

Cisco Customer Success Manager (CSM)

Mastering The Cisco Business Architecture Discipline (DTBAD)

Filters