Question 1

Refer to the exhibit. Which statement correctly identifies the hardware features on the Cisco Nexus 9500 Series supervisor A modules?

Accepted Answer

A)  A is 10/100/1000 Management port; B is USB port; C is Console port; D is external clock input 
B)  A is Console port; B is USB port; C is 10/100/1000 Management port; D is external clock input 
C)  A is Optical port; B is USB port; C is 10/100/1000 Management port; D is external clock input 
D)  A is Console port; B is USB port; C is 10/100/1000 Management port; D is Diagnostic port 
A)  A is 10/100/1000 Management port; B is USB port; C is Console port; D is external clock input 
B)  A is Console port; B is USB port; C is 10/100/1000 Management port; D is external clock input 
C)  A is Optical port; B is USB port; C is 10/100/1000 Management port; D is external clock input 
D)  A is Console port; B is USB port; C is 10/100/1000 Management port; D is Diagnostic port

Question 2

When a host firmware package policy is created, what must it be associated with to upgrade the BIOS?

Accepted Answer

A)  blade or blade pool 
B)  service profile 
C)  boot policy 
D)  service template 
A)  blade or blade pool 
B)  service profile 
C)  boot policy 
D)  service template

Question 3

Which three statements about powering down a Cisco UCS C-Series Rack-Mount Server to perform maintenance or replacement are true?  (Choose three.)

Accepted Answer

A)  Standby power mode: Power is supplied only to the service processor and the cooling fans, and it is safe to power off the server from this mode. 
B)  Power status LED.  Green indicates that the server is in main power mode and can be safely powered off. 
C)  Graceful shutdown: Press and release the power button. The operating system performs a graceful shutdown, and the server goes to standby mode, which is indicated by an amber power status LED. 
D)  Disconnect the power cords from the power supplies in your server to completely power off the server. 
E)  Only an emergency shutdown can be performed using the power button on the server front panel.
F) The Cisco UCS C-Series Rack-Mount Server has only one power mode. 
A)  Standby power mode: Power is supplied only to the service processor and the cooling fans, and it is safe to power off the server from this mode. 
B)  Power status LED.  Green indicates that the server is in main power mode and can be safely powered off. 
C)  Graceful shutdown: Press and release the power button. The operating system performs a graceful shutdown, and the server goes to standby mode, which is indicated by an amber power status LED. 
D)  Disconnect the power cords from the power supplies in your server to completely power off the server. 
E)  Only an emergency shutdown can be performed using the power button on the server front panel.
F) The Cisco UCS C-Series Rack-Mount Server has only one power mode.

Question 4

Which two specialized tools do you need to service a UCS product? (Choose two.)

Accepted Answer

A)  Laptop 
B)  Anti-static Strap 
C)  KVM Console to USB 2.0 Portable Laptop Crash Cart 
D)  Cable Tester 
E)  Needle-nose pliers 
A)  Laptop 
B)  Anti-static Strap 
C)  KVM Console to USB 2.0 Portable Laptop Crash Cart 
D)  Cable Tester 
E)  Needle-nose pliers

Question 5

What is the wire transmission speed for 100GBASE-ER4 Ethernet?

Accepted Answer

A)  100 Mb/s 
B)  1 Gb/s 
C)  10 Gb/s 
D)  100 Gb/s 
A)  100 Mb/s 
B)  1 Gb/s 
C)  10 Gb/s 
D)  100 Gb/s

Question 6

Which two statements about Cisco UCS 6454 Fabric Interconnect are true? (Choose two.)

Accepted Answer

A)  1-RU 10/25/40/100/200/400 Gigabit Ethernet, FCoE, and Fibre Channel switch offers up to 32 ports. 
B)  It hosts and runs Cisco Integrated Management Controller (CIM
C) . 
C)  All Ethernet ports can support FCoE. 
D)  Provides the management and communication backbone for the Cisco UCS 5108 Server Chassis and Cisco UCS B-Series Blade Servers only. 
E)  Provides both the LAN and SAN connectivity for all servers within its domain. 
A)  1-RU 10/25/40/100/200/400 Gigabit Ethernet, FCoE, and Fibre Channel switch offers up to 32 ports. 
B)  It hosts and runs Cisco Integrated Management Controller (CIM
C) . 
C)  All Ethernet ports can support FCoE. 
D)  Provides the management and communication backbone for the Cisco UCS 5108 Server Chassis and Cisco UCS B-Series Blade Servers only. 
E)  Provides both the LAN and SAN connectivity for all servers within its domain.

Question 7

Which command-line interface mode is best described by this prompt? Switch (config) #

Accepted Answer

A)  Local management mode 
B)  EXEC mode 
C)  Boot mode 
D)  Global configuration command mode 
A)  Local management mode 
B)  EXEC mode 
C)  Boot mode 
D)  Global configuration command mode

Question 8

Which command can be used to exit to EXEC mode from this current mode? switch(config-if) #

Accepted Answer

A)  Ctrl-C 
B)  Ctrl-L 
C)  quit 
D)  exit 
E)  end 
A)  Ctrl-C 
B)  Ctrl-L 
C)  quit 
D)  exit 
E)  end

Question 9

Refer to the exhibit. Which two faults can occur if the System Health LED is in a steady amber state? (Choose two.)

Accepted Answer

A)  At least one DIMM is faulty. 
B)  Major fault with CPU 
C)  Major fault with the system board 
D)  CPU mismatch 
E)  Major fault with memory DIMM 
A)  At least one DIMM is faulty. 
B)  Major fault with CPU 
C)  Major fault with the system board 
D)  CPU mismatch 
E)  Major fault with memory DIMM

Question 10

Refer to the exhibit. Which item does B represent?

Accepted Answer

A)  mLOM 
B)  Rear 2.5-inch drive bays 
C)  PCle Riser 1 
D)  PCle Riser 2 
E)  Power Supply 
A)  mLOM 
B)  Rear 2.5-inch drive bays 
C)  PCle Riser 1 
D)  PCle Riser 2 
E)  Power Supply

Question 11

What is the name of the process to automatically upgrade a new Fabric Interconnect when it is connected to the functioning Fabric Interconnect?

Accepted Answer

A)  Firmware Policy Process 
B)  Auto-Negotiate Process 
C)  Auto-Sync Process 
D)  Firmware Update Process 
A)  Firmware Policy Process 
B)  Auto-Negotiate Process 
C)  Auto-Sync Process 
D)  Firmware Update Process

Question 12

Which Cisco MDS 9700 Series platform supports the Supervisor-1E module?

Accepted Answer

A)  Cisco MDS 9706 
B)  Cisco MDS 9709 
C)  Cisco MDS 9710 
D)  Cisco MDS 9718 
A)  Cisco MDS 9706 
B)  Cisco MDS 9709 
C)  Cisco MDS 9710 
D)  Cisco MDS 9718

Question 13

Up to what speed can Category 5 UTP cable transmit data?

Accepted Answer

A)  10 Mb/s 
B)  100 Mb/s 
C)  1000 Mb/s 
D)  10000 Mb/s 
A)  10 Mb/s 
B)  100 Mb/s 
C)  1000 Mb/s 
D)  10000 Mb/s

Question 14

Which cable is used to access the command-line interface of a Cisco UCS 6120XP Fabric Interconnects?

Accepted Answer

A)  KVM cable 
B)  console cable 
C)  Ethernet cable 
D)  SFP+ Ethernet transceiver cable 
A)  KVM cable 
B)  console cable 
C)  Ethernet cable 
D)  SFP+ Ethernet transceiver cable

Question 15

What enables NVM Express host software to communicate with nonvolatile memory?

Accepted Answer

A)  SATA 
B)  SAS 
C)  PCle 
D)  SCSI 
A)  SATA 
B)  SAS 
C)  PCle 
D)  SCSI

Question 16

What enables NVM Express host software to communicate with nonvolatile memory?

Accepted Answer

A)  SATA 
B)  SAS 
C)  PCIe 
D)  SCSI 
A)  SATA 
B)  SAS 
C)  PCIe 
D)  SCSI

Question 17

Which device provides analysis of Fibre Channel traffic without any network disruption?

Accepted Answer

A)  Cisco MDS 9000 Data Analyzer Adapter 
B)  Cisco MDS 9000 Port Analyzer Adapter 
C)  Cisco MDS 9000 Channel Analyzer Device 
D)  Cisco MDS 9000 Channel Analyzer Adapter 
A)  Cisco MDS 9000 Data Analyzer Adapter 
B)  Cisco MDS 9000 Port Analyzer Adapter 
C)  Cisco MDS 9000 Channel Analyzer Device 
D)  Cisco MDS 9000 Channel Analyzer Adapter

Question 18

Which two commands display the version of Cisco NX-OS code that the device is currently running on? (Choose two.)

Accepted Answer

A)  show version 
B)  show module 
C)  show interface 
D)  show boot 
E)  show license 
A)  show version 
B)  show module 
C)  show interface 
D)  show boot 
E)  show license

Question 19

Which three tools are necessary to console into a Cisco UCS C-Series Rack-Mount Server? (Choose three.)

Accepted Answer

A)  Cisco DB-9-to-RJ-45 console cable 
B)  laptop 
C)  monitor 
D)  keyboard 
E)  KVM dongle
F) USB serial adapter 
A)  Cisco DB-9-to-RJ-45 console cable 
B)  laptop 
C)  monitor 
D)  keyboard 
E)  KVM dongle
F) USB serial adapter

Question 20

Which action should the administrator take before physically removing a blade server for maintenance or replacement?

Accepted Answer

A)  Force the server to shut down. 
B)  Disassociate the service profile. 
C)  Decommission the server. 
D)  Perform a graceful shutdown of the server. 
A)  Force the server to shut down. 
B)  Disassociate the service profile. 
C)  Decommission the server. 
D)  Perform a graceful shutdown of the server.

Exam 1: Supporting Cisco Data Center System Devices (DCTECH)

Refer to the exhibit. Which statement correctly identifies the hardware features on the Cisco Nexus 9500 Series supervisor A modules?

When a host firmware package policy is created, what must it be associated with to upgrade the BIOS?

Which three statements about powering down a Cisco UCS C-Series Rack-Mount Server to perform maintenance or replacement are true? (Choose three.)

Which two specialized tools do you need to service a UCS product? (Choose two.)

What is the wire transmission speed for 100GBASE-ER4 Ethernet?

Which two statements about Cisco UCS 6454 Fabric Interconnect are true? (Choose two.)

Which command-line interface mode is best described by this prompt? Switch (config) #

Which command can be used to exit to EXEC mode from this current mode? switch(config-if) #

Refer to the exhibit. Which two faults can occur if the System Health LED is in a steady amber state? (Choose two.)

Refer to the exhibit. Which item does B represent?

What is the name of the process to automatically upgrade a new Fabric Interconnect when it is connected to the functioning Fabric Interconnect?

Which Cisco MDS 9700 Series platform supports the Supervisor-1E module?

Up to what speed can Category 5 UTP cable transmit data?

Which cable is used to access the command-line interface of a Cisco UCS 6120XP Fabric Interconnects?

What enables NVM Express host software to communicate with nonvolatile memory?

What enables NVM Express host software to communicate with nonvolatile memory?

Which device provides analysis of Fibre Channel traffic without any network disruption?

Which two commands display the version of Cisco NX-OS code that the device is currently running on? (Choose two.)

Which three tools are necessary to console into a Cisco UCS C-Series Rack-Mount Server? (Choose three.)

Which action should the administrator take before physically removing a blade server for maintenance or replacement?

Cisco Certified Technician Routing & Switching (RSTECH)

Understanding Cisco Cybersecurity Operations Fundamentals (CBROPS)

Cisco Certified Network Associate (CCNA)

Managing Industrial Networks with Cisco Networking Technologies (IMINS)

DevNet Associate (DEVASC)

Conducting Forensic Analysis and Incident Response Using Cisco CyberOps Technologies (CBRFIR)

Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)

Implementing Cisco SD-WAN Solutions (ENSDWI)

Designing Cisco Enterprise Networks (ENSLD)

Designing Cisco Enterprise Wireless Networks (300-425 ENWLSD)

Implementing Cisco Enterprise Wireless Networks (300-430 ENWLSI)

Automating Cisco Enterprise Solutions (ENAUTO)

Implementing Cisco Service Provider Advanced Routing Solutions (SPRI)

Implementing Cisco Service Provider VPN Services (SPVI)

Designing Cisco Data Center Infrastructure (DCID)

Troubleshooting Cisco Data Center Infrastructure (DCIT)

Implementing Cisco Application Centric Infrastructure (DCACI)

Configuring Cisco MDS 9000 Series Switches (DCSAN)

Implementing Cisco Application Centric Infrastructure - Advanced

Automating Cisco Data Center Solutions (DCAUTO)

Securing Networks with Cisco Firepower (300-710 SNCF)

Implementing and Configuring Cisco Identity Services Engine (300-715 SISE)

Securing Email with Cisco Email Security Appliance (300-720 SESA)

Securing the Web with Cisco Web Security Appliance (300-725 SWSA)

Implementing Secure Solutions with Virtual Private Networks (SVPN 300-730)

Automating Cisco Security Solutions (SAUTO)

Implementing Cisco Collaboration Applications (CLICA)

Implementing Cisco Advanced Call Control and Mobility Services (CLASSM)

Implementing Cisco Collaboration Cloud and Edge Solutions

Implementing Cisco Collaboration Conferencing

Automating Cisco Collaboration Solutions (CLAUTO)

Implementing DevOps Solutions and Practices using Cisco Platforms (DEVOPS)

Developing Solutions Using Cisco IoT and Edge Platforms (DEVIOT)

Developing Applications for Cisco Webex and Webex Devices (DEVWBX)

Performing CyberOps Using Core Security Technologies (CBRCOR)

Implementing Cisco Enterprise Network Core Technologies (ENCOR)

Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)

Implementing and Operating Cisco Data Center Core Technologies (DCCOR)

Implementing and Operating Cisco Security Core Technologies

Implementing Cisco Collaboration Core Technologies (CLCOR)

Developing Applications using Cisco Core Platforms and APIs (DEVCOR)

CCDE Design Written

Deploying Cisco Unified Contact Center Express

Cisco Meraki Solutions Specialist

Securing Cisco Networks with Sourcefire FireAMP Endpoints

Designing Cisco Unified Contact Center Enterprise (UCCED)

Implementing and Supporting Cisco Unified Contact Center Enterprise (UCCEIS)

Cisco Collaboration SaaS Authorization Exam

Cisco Security Architecture for System Engineers

Adopting The Cisco Business Architecture Approach (DTBAA)

Cisco Customer Success Manager (CSM)

Mastering The Cisco Business Architecture Discipline (DTBAD)

Filters