Question 1

Refer to the exhibit.   What is the name of this Cisco Nexus 3000 Series Switch?

Accepted Answer

A)  Cisco Nexus 3132Q 
B)  Cisco Nexus 3172PQ 
C)  Cisco Nexus 3524 
D)  Cisco Nexus 3016 
A)  Cisco Nexus 3132Q 
B)  Cisco Nexus 3172PQ 
C)  Cisco Nexus 3524 
D)  Cisco Nexus 3016

Question 2

Which RAID level fault tolerance allows two disk failures?

Accepted Answer

A)  RAID 1 
B)  RAID 4 
C)  RAID 5 
D)  RAID 6 
A)  RAID 1 
B)  RAID 4 
C)  RAID 5 
D)  RAID 6

Question 3

Which two statements about DIMM replacement in Cisco UCS Servers are true? (Choose two.)

Accepted Answer

A)  In blade servers, DIMMs can be installed in either 1, 2, 4, or 8 DIMMs per channel. 
B)  Rack-mount and blade servers have memory fault LEDs that indicate which DIMM requires attention. 
C)  In servers that require pairs of DIMMs, the pairs must be identical (manufacturer, size, part #, and so on). 
D)  If the memory in a server is not fully populated, you can install DIMMs in any open slot. 
A)  In blade servers, DIMMs can be installed in either 1, 2, 4, or 8 DIMMs per channel. 
B)  Rack-mount and blade servers have memory fault LEDs that indicate which DIMM requires attention. 
C)  In servers that require pairs of DIMMs, the pairs must be identical (manufacturer, size, part #, and so on). 
D)  If the memory in a server is not fully populated, you can install DIMMs in any open slot.

Question 4

Which two statements about Cisco UCS S3260 Storage Server are true? (Choose two.)

Accepted Answer

A)  AMD EPYC 7000 series processors, with up to 32 cores per socket 
B)  Up to 1 TB of Intel Optane DC Persistent Memory 
C)  It is in a compact 2-RU form factor. 
D)  Support for the Cisco 12-G 9460-8i PCle SAS RAID controller 
E)  Massive 840-TB data storage capacity 
A)  AMD EPYC 7000 series processors, with up to 32 cores per socket 
B)  Up to 1 TB of Intel Optane DC Persistent Memory 
C)  It is in a compact 2-RU form factor. 
D)  Support for the Cisco 12-G 9460-8i PCle SAS RAID controller 
E)  Massive 840-TB data storage capacity

Question 5

What are two common steps to troubleshooting a rack server with unrecognized or memory errors? (Choose two.)

Accepted Answer

A)  Ensure DIMMs are installed in correct slots 
B)  Check CPU sockets for bent pins 
C)  Check that the AC power cord is OK 
D)  Reseat DIMMs 
E)  Check the front I/O cable connection to the motherboard 
A)  Ensure DIMMs are installed in correct slots 
B)  Check CPU sockets for bent pins 
C)  Check that the AC power cord is OK 
D)  Reseat DIMMs 
E)  Check the front I/O cable connection to the motherboard

Question 6

Which two statements about PCIe are true? (Choose two.)

Accepted Answer

A)  The PCle supports native hot-swap functionality. 
B)  You can install a PCI Express x16 adapter into an x4 slot. 
C)  The PCIe standard is a bus-based system in which all the devices share the same bidirectional, 32-bit or 64-bit, parallel signal path. 
D)  The PCIe 4.0 standard doubles the transfer rate compared to PCIe 5.0. 
E)  A link that is composed of four lanes is called an x4 link. 
A)  The PCle supports native hot-swap functionality. 
B)  You can install a PCI Express x16 adapter into an x4 slot. 
C)  The PCIe standard is a bus-based system in which all the devices share the same bidirectional, 32-bit or 64-bit, parallel signal path. 
D)  The PCIe 4.0 standard doubles the transfer rate compared to PCIe 5.0. 
E)  A link that is composed of four lanes is called an x4 link.

Question 7

When the Cisco UCS Manager is used to verify the B- or C-Series device, which two types of Overall Status are acceptable and do not indicate a failure?  (Choose two.)

Accepted Answer

A)  Online 
B)  OK 
C)  Unassociated 
D)  Active 
A)  Online 
B)  OK 
C)  Unassociated 
D)  Active

Question 8

What is the correct path to verify the Overall Status of Chassis 1 | Server 3?

Accepted Answer

A)  Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 Status tab 
B)  Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 General tab 
C)  Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 FSM tab 
D)  Servers Tab > Chassis > Server 3 General tab 
E)  Status Tab > Chassis > Chassis 1 > Servers > Server 3
F) Admin Tab > Chassis > Chassis 1 > Servers > Server 3 General tab 
A)  Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 Status tab 
B)  Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 General tab 
C)  Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 FSM tab 
D)  Servers Tab > Chassis > Server 3 General tab 
E)  Status Tab > Chassis > Chassis 1 > Servers > Server 3
F) Admin Tab > Chassis > Chassis 1 > Servers > Server 3 General tab

Question 9

Which statement about the Cisco Nexus 3408-S switch is true?

Accepted Answer

A)  It is offered in a three-rack-unit (3-RU) form factor. 
B)  It supports 200G or 400G line card expansion modules. 
C)  It has dual-redundant power supplies. 
D)  It is 4-slot chassis with 400G line card expansion modules. 
A)  It is offered in a three-rack-unit (3-RU) form factor. 
B)  It supports 200G or 400G line card expansion modules. 
C)  It has dual-redundant power supplies. 
D)  It is 4-slot chassis with 400G line card expansion modules.

Question 10

Refer to the exhibit.   Where is the best place to find the B200 BIOS version used in a specific Cisco UCS Manager version?

Accepted Answer

A)  A - Installed Firmware 
B)  B - Packages 
C)  C - Images 
D)  D - Capability Catalog 
E)  E - Management Extension 
A)  A - Installed Firmware 
B)  B - Packages 
C)  C - Images 
D)  D - Capability Catalog 
E)  E - Management Extension

Question 11

Refer to the exhibit. Which item does 3 represent?

Accepted Answer

A)  Operate as 40-Gbps QSFP+ ports or as 4 × 10-Gbps SFP+ breakout ports 
B)  Operate as 40-Gbps QSFP+ ports, and support QSA adapters to provide 1-Gbps to 10-Gbps operation 
C)  Operate as port lane switch button, port lane LEDs, and Layer 1 and Layer 2 ports. 
D)  Operate as dedicated 40-Gbps, QSFP+ uplink ports. 
A)  Operate as 40-Gbps QSFP+ ports or as 4 × 10-Gbps SFP+ breakout ports 
B)  Operate as 40-Gbps QSFP+ ports, and support QSA adapters to provide 1-Gbps to 10-Gbps operation 
C)  Operate as port lane switch button, port lane LEDs, and Layer 1 and Layer 2 ports. 
D)  Operate as dedicated 40-Gbps, QSFP+ uplink ports.

Question 12

Which three statements about FCoE are true? (Choose three.)

Accepted Answer

A)  Allows Fibre Channel and Ethernet networks to share a single, integrated infrastructure. 
B)  Encapsulates Fibre Channel frames into Ethernet frames, which allows them to run alongside traditional IP traffic. 
C)  Increases capital costs due to the difficulty to manage. 
D)  Consolidates I/O traffic in the data center. 
A)  Allows Fibre Channel and Ethernet networks to share a single, integrated infrastructure. 
B)  Encapsulates Fibre Channel frames into Ethernet frames, which allows them to run alongside traditional IP traffic. 
C)  Increases capital costs due to the difficulty to manage. 
D)  Consolidates I/O traffic in the data center.

Question 13

Which fiber optic cable type is used most often with a Subscriber connector?

Accepted Answer

A)  dual-mode 
B)  single-mode 
C)  straight-mode 
D)  multi-mode 
E)  subscriber-mode 
A)  dual-mode 
B)  single-mode 
C)  straight-mode 
D)  multi-mode 
E)  subscriber-mode

Question 14

Which two remote file system methods are used in the training material to transfer firmware to the Fabric Interconnect? (Choose two.)

Accepted Answer

A)  FTPS 
B)  FTP 
C)  TFTP 
D)  RSH 
A)  FTPS 
B)  FTP 
C)  TFTP 
D)  RSH

Question 15

Which statement is true about cloud deployment models?

Accepted Answer

A)  A public cloud is typically infrastructure used by a single organization. 
B)  Public clouds are more expensive than private clouds. 
C)  Hybrid cloud supports multiple organizations sharing computing resources that are part of a community. 
D)  Public clouds are less secure than private clouds. 
A)  A public cloud is typically infrastructure used by a single organization. 
B)  Public clouds are more expensive than private clouds. 
C)  Hybrid cloud supports multiple organizations sharing computing resources that are part of a community. 
D)  Public clouds are less secure than private clouds.

Question 16

Refer to the exhibit.   Which option should you select to get the output of the show tech-support detail command for the Cisco UCS B-Series blade?

Accepted Answer

A)  A - ucsm 
B)  B - chassis 
C)  C - fabric-extender 
D)  D - rack-server 
A)  A - ucsm 
B)  B - chassis 
C)  C - fabric-extender 
D)  D - rack-server

Question 17

Where do you find the model number of a Cisco MDS 9200 Series chassis?

Accepted Answer

A)  on the top front of the chassis next to the serial number 
B)  on the bottom front of the chassis next to the Cisco logo 
C)  on the top front of the chassis next to the Cisco logo 
D)  on the bottom front of the chassis next to the serial number 
A)  on the top front of the chassis next to the serial number 
B)  on the bottom front of the chassis next to the Cisco logo 
C)  on the top front of the chassis next to the Cisco logo 
D)  on the bottom front of the chassis next to the serial number

Question 18

Refer to the exhibit.   What is the name of this rack-mount server?

Accepted Answer

A)  Cisco UCS C220 Rack-Mount Server 
B)  Cisco UCS C240 Rack-Mount Server 
C)  Cisco UCS C420 Rack-Mount Server 
D)  Cisco UCS C460 Rack-Mount Server 
A)  Cisco UCS C220 Rack-Mount Server 
B)  Cisco UCS C240 Rack-Mount Server 
C)  Cisco UCS C420 Rack-Mount Server 
D)  Cisco UCS C460 Rack-Mount Server

Question 19

Which three components are hot swappable in a Cisco UCS Blade Server and Chassis? (Choose three.)

Accepted Answer

A)  Fabric Extender 
B)  Power supply 
C)  Heat sink 
D)  SAS Hard Drive 
E)  2x8GB Kit DIMMs
F) Mezzanine card 
A)  Fabric Extender 
B)  Power supply 
C)  Heat sink 
D)  SAS Hard Drive 
E)  2x8GB Kit DIMMs
F) Mezzanine card

Question 20

Cisco UCS 5100 Blade Server Chassis supports which two devices? (Choose two.)

Accepted Answer

A)  Blade servers 
B)  Fiber Extenders 
C)  Rack-mount Servers 
D)  S-Series Storage servers 
E)  E-Series Servers 
A)  Blade servers 
B)  Fiber Extenders 
C)  Rack-mount Servers 
D)  S-Series Storage servers 
E)  E-Series Servers

Exam 1: Supporting Cisco Data Center System Devices (DCTECH)

Refer to the exhibit. What is the name of this Cisco Nexus 3000 Series Switch?

Which RAID level fault tolerance allows two disk failures?

Which two statements about DIMM replacement in Cisco UCS Servers are true? (Choose two.)

Which two statements about Cisco UCS S3260 Storage Server are true? (Choose two.)

What are two common steps to troubleshooting a rack server with unrecognized or memory errors? (Choose two.)

Which two statements about PCIe are true? (Choose two.)

When the Cisco UCS Manager is used to verify the B- or C-Series device, which two types of Overall Status are acceptable and do not indicate a failure? (Choose two.)

What is the correct path to verify the Overall Status of Chassis 1 | Server 3?

Which statement about the Cisco Nexus 3408-S switch is true?

Refer to the exhibit. Where is the best place to find the B200 BIOS version used in a specific Cisco UCS Manager version?

Refer to the exhibit. Which item does 3 represent?

Which three statements about FCoE are true? (Choose three.)

Which fiber optic cable type is used most often with a Subscriber connector?

Which two remote file system methods are used in the training material to transfer firmware to the Fabric Interconnect? (Choose two.)

Which statement is true about cloud deployment models?

Refer to the exhibit. Which option should you select to get the output of the show tech-support detail command for the Cisco UCS B-Series blade?

Where do you find the model number of a Cisco MDS 9200 Series chassis?

Refer to the exhibit. What is the name of this rack-mount server?

Which three components are hot swappable in a Cisco UCS Blade Server and Chassis? (Choose three.)

Cisco UCS 5100 Blade Server Chassis supports which two devices? (Choose two.)

Cisco Certified Technician Routing & Switching (RSTECH)

Understanding Cisco Cybersecurity Operations Fundamentals (CBROPS)

Cisco Certified Network Associate (CCNA)

Managing Industrial Networks with Cisco Networking Technologies (IMINS)

DevNet Associate (DEVASC)

Conducting Forensic Analysis and Incident Response Using Cisco CyberOps Technologies (CBRFIR)

Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)

Implementing Cisco SD-WAN Solutions (ENSDWI)

Designing Cisco Enterprise Networks (ENSLD)

Designing Cisco Enterprise Wireless Networks (300-425 ENWLSD)

Implementing Cisco Enterprise Wireless Networks (300-430 ENWLSI)

Automating Cisco Enterprise Solutions (ENAUTO)

Implementing Cisco Service Provider Advanced Routing Solutions (SPRI)

Implementing Cisco Service Provider VPN Services (SPVI)

Designing Cisco Data Center Infrastructure (DCID)

Troubleshooting Cisco Data Center Infrastructure (DCIT)

Implementing Cisco Application Centric Infrastructure (DCACI)

Configuring Cisco MDS 9000 Series Switches (DCSAN)

Implementing Cisco Application Centric Infrastructure - Advanced

Automating Cisco Data Center Solutions (DCAUTO)

Securing Networks with Cisco Firepower (300-710 SNCF)

Implementing and Configuring Cisco Identity Services Engine (300-715 SISE)

Securing Email with Cisco Email Security Appliance (300-720 SESA)

Securing the Web with Cisco Web Security Appliance (300-725 SWSA)

Implementing Secure Solutions with Virtual Private Networks (SVPN 300-730)

Automating Cisco Security Solutions (SAUTO)

Implementing Cisco Collaboration Applications (CLICA)

Implementing Cisco Advanced Call Control and Mobility Services (CLASSM)

Implementing Cisco Collaboration Cloud and Edge Solutions

Implementing Cisco Collaboration Conferencing

Automating Cisco Collaboration Solutions (CLAUTO)

Implementing DevOps Solutions and Practices using Cisco Platforms (DEVOPS)

Developing Solutions Using Cisco IoT and Edge Platforms (DEVIOT)

Developing Applications for Cisco Webex and Webex Devices (DEVWBX)

Performing CyberOps Using Core Security Technologies (CBRCOR)

Implementing Cisco Enterprise Network Core Technologies (ENCOR)

Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)

Implementing and Operating Cisco Data Center Core Technologies (DCCOR)

Implementing and Operating Cisco Security Core Technologies

Implementing Cisco Collaboration Core Technologies (CLCOR)

Developing Applications using Cisco Core Platforms and APIs (DEVCOR)

CCDE Design Written

Deploying Cisco Unified Contact Center Express

Cisco Meraki Solutions Specialist

Securing Cisco Networks with Sourcefire FireAMP Endpoints

Designing Cisco Unified Contact Center Enterprise (UCCED)

Implementing and Supporting Cisco Unified Contact Center Enterprise (UCCEIS)

Cisco Collaboration SaaS Authorization Exam

Cisco Security Architecture for System Engineers

Adopting The Cisco Business Architecture Approach (DTBAA)

Cisco Customer Success Manager (CSM)

Mastering The Cisco Business Architecture Discipline (DTBAD)

Filters