Question 1

Refer to the exhibit.   Which statement correctly identifies the front panel LEDs on the Cisco UCS C220 Server?

Accepted Answer

A)  A is power button and power status LED; B is identification button and LED; C is system status LED; D is network link activity LED. 
B)  A is network link activity LED; B is system status LED; C is power button and power status LED; D is identification button and LED. 
C)  A is system status LED; B is network link activity LED; C is power button and power status LED; D is identification button and LED. 
D)  A is network link activity LED; B is system status LED; C is identification button and LED; D is power button and power status LED. 
A)  A is power button and power status LED; B is identification button and LED; C is system status LED; D is network link activity LED. 
B)  A is network link activity LED; B is system status LED; C is power button and power status LED; D is identification button and LED. 
C)  A is system status LED; B is network link activity LED; C is power button and power status LED; D is identification button and LED. 
D)  A is network link activity LED; B is system status LED; C is identification button and LED; D is power button and power status LED.

Question 2

Which three steps do you perform to troubleshoot when a rack server powers on with no video? (Choose three.)

Accepted Answer

A)  Check that the front I/O dongle is properly seated. 
B)  Check the front I/O cable connection to the motherboard. 
C)  Check for memory subsystem failure. 
D)  Verify the power source to equipment. 
E)  Reseat the DIMMs, CPU, and PCI cards. 
A)  Check that the front I/O dongle is properly seated. 
B)  Check the front I/O cable connection to the motherboard. 
C)  Check for memory subsystem failure. 
D)  Verify the power source to equipment. 
E)  Reseat the DIMMs, CPU, and PCI cards.

Question 3

Which Cisco NX-OS command displays kernel uptime?

Accepted Answer

A)  show module 
B)  show version 
C)  show license 
D)  show boot 
E)  show interface 
A)  show module 
B)  show version 
C)  show license 
D)  show boot 
E)  show interface

Question 4

Which two external features are in the Cisco UCS C125 M5 Compute Node? (Choose two.)

Accepted Answer

A)  PCIe Risers 
B)  USB 3.0 port 
C)  Supercap unit 
D)  SD card slots 
E)  SAS/SATA drives 
A)  PCIe Risers 
B)  USB 3.0 port 
C)  Supercap unit 
D)  SD card slots 
E)  SAS/SATA drives

Question 5

Which Cisco MDS model supports the most Fibre Channel ports per chassis?

Accepted Answer

A)  MDS 9513 
B)  MDS 9509 
C)  MDS 9506 
D)  MDS 9250i 
A)  MDS 9513 
B)  MDS 9509 
C)  MDS 9506 
D)  MDS 9250i

Question 6

Which two provide connectivity to Fabric Extenders? (Choose two.)

Accepted Answer

A)  UCS 6300 series 
B)  UCS B-Series Servers 
C)  UCS 6400 series 
D)  UCS S-Series Storage Servers 
E)  UCS E-Series Servers 
A)  UCS 6300 series 
B)  UCS B-Series Servers 
C)  UCS 6400 series 
D)  UCS S-Series Storage Servers 
E)  UCS E-Series Servers

Question 7

What do the small form-factor, x86 64-bit blade servers reside in Cisco branch-office router?

Accepted Answer

A)  Cisco UCS E-Series Servers 
B)  Cisco UCS S-Series Storage Servers 
C)  Cisco UCS Blade Servers 
D)  Cisco UCS C-Series Rack-Mount Servers 
A)  Cisco UCS E-Series Servers 
B)  Cisco UCS S-Series Storage Servers 
C)  Cisco UCS Blade Servers 
D)  Cisco UCS C-Series Rack-Mount Servers

Question 8

Which two commands allow you to view the state of high availability between the two clustered Fabric Interconnects? (Choose two.)

Accepted Answer

A)  show cluster state extended 
B)  show cluster extended-state 
C)  show cluster HA status 
D)  show cluster state 
E)  show cluster HA state 
A)  show cluster state extended 
B)  show cluster extended-state 
C)  show cluster HA status 
D)  show cluster state 
E)  show cluster HA state

Question 9

How do you find the serial number of a Cisco UCS 5108 Blade Server chassis?

Accepted Answer

A)  Use the Cisco UCS Admin. 
B)  Use the Cisco UCS Application. 
C)  Use the Cisco UCS Assistant. 
D)  Use the Cisco UCS Manager. 
A)  Use the Cisco UCS Admin. 
B)  Use the Cisco UCS Application. 
C)  Use the Cisco UCS Assistant. 
D)  Use the Cisco UCS Manager.

Question 10

Which tool does a network administrator not need when installing hardware?

Accepted Answer

A)  cable tester 
B)  wrench set 
C)  cable wraps 
D)  needle-nose pliers 
E)  PCMCIA memory
F) soldering iron with grounded tip 
A)  cable tester 
B)  wrench set 
C)  cable wraps 
D)  needle-nose pliers 
E)  PCMCIA memory
F) soldering iron with grounded tip

Question 11

Refer to the exhibit.   Where is the best place to see bootflash free space?

Accepted Answer

A)  A - Available Memory 
B)  B - Total Memory 
C)  C - Local Storage Information 
D)  D - High Availability Details 
A)  A - Available Memory 
B)  B - Total Memory 
C)  C - Local Storage Information 
D)  D - High Availability Details

Question 12

Refer to the exhibit.   Where is the best place to see whether the system is ready for a Fabric Interconnect failover?

Accepted Answer

A)  A - Overall Status operable 
B)  B - L1 Connection 
C)  C - Part Details 
D)  D - Access 
E)  E - High Availability Details 
A)  A - Overall Status operable 
B)  B - L1 Connection 
C)  C - Part Details 
D)  D - Access 
E)  E - High Availability Details

Question 13

When replacing a standalone C-Series server which order will be used to shut down the server via CIMC?

Accepted Answer

A)  Click Power off, Click Shut off 
B)  Click Power off, Click Shut down 
C)  Click Host power, Click Shut off 
D)  Click Host power, Click Shut down 
A)  Click Power off, Click Shut off 
B)  Click Power off, Click Shut down 
C)  Click Host power, Click Shut off 
D)  Click Host power, Click Shut down

Question 14

Which statement about RAID is true?

Accepted Answer

A)  RAID is a scheme used to logically combine several independent disks to form an array or group of drives. 
B)  RAID provides data redundancy with either odd parity or even parity. 
C)  RAID drive group appears to the host computer as multiple physical storage units. 
D)  RAID parity information can be stored across multiple RAID levels. 
E)  RAID stores data in the array with data striping, encryption, and parity to organize the data among the disks. 
A)  RAID is a scheme used to logically combine several independent disks to form an array or group of drives. 
B)  RAID provides data redundancy with either odd parity or even parity. 
C)  RAID drive group appears to the host computer as multiple physical storage units. 
D)  RAID parity information can be stored across multiple RAID levels. 
E)  RAID stores data in the array with data striping, encryption, and parity to organize the data among the disks.

Question 15

Which two major components does a Cisco Nexus 1000V Series Switch have? (Choose two.)

Accepted Answer

A)  Virtual Fiber Channel Module 
B)  Virtual Ethernet Module 
C)  Virtual Supervisor Module 
D)  Virtual Memory Controller Module 
E)  Virtual Network Module 
A)  Virtual Fiber Channel Module 
B)  Virtual Ethernet Module 
C)  Virtual Supervisor Module 
D)  Virtual Memory Controller Module 
E)  Virtual Network Module

Question 16

Which two form factors are available in the Cisco UCS E-Series Servers? (Choose two.)

Accepted Answer

A)  EHWIC 
B)  PVDM 
C)  NIM 
D)  VIC 
E)  WIC 
A)  EHWIC 
B)  PVDM 
C)  NIM 
D)  VIC 
E)  WIC

Question 17

Which three options are the minimum browser requirements to log into the Cisco CIMC GUI? (Choose three.)

Accepted Answer

A)  Java 1.6 or higher 
B)  HTTP and HTTPS enabled 
C)  Adobe Flash Player 10 or higher 
D)  Internet Explorer version 10 
E)  Firefox 26.0
F) Adobe Shockwave Player 11 or higher 
A)  Java 1.6 or higher 
B)  HTTP and HTTPS enabled 
C)  Adobe Flash Player 10 or higher 
D)  Internet Explorer version 10 
E)  Firefox 26.0
F) Adobe Shockwave Player 11 or higher

Question 18

Which method does FCIP use to enable connectivity of geographically distributed Fibre Channel SANs over IP?

Accepted Answer

A)  routing 
B)  tunneling 
C)  handshaking 
D)  transporting 
A)  routing 
B)  tunneling 
C)  handshaking 
D)  transporting

Question 19

Which statement is true about QSFP?

Accepted Answer

A)  The four 10 Gbit/sec channels that QSFP+ supports can be combined into a single 40 Gigabit Ethernet link. 
B)  QSFP-DD stands for Quad Small Form Factor Pluggable Double Distance. 
C)  The QSFP+ offers higher data speed than QSFP28. 
D)  100GBASE-SR4 supports a much longer distance than 100GBASE-LR4. 
A)  The four 10 Gbit/sec channels that QSFP+ supports can be combined into a single 40 Gigabit Ethernet link. 
B)  QSFP-DD stands for Quad Small Form Factor Pluggable Double Distance. 
C)  The QSFP+ offers higher data speed than QSFP28. 
D)  100GBASE-SR4 supports a much longer distance than 100GBASE-LR4.

Question 20

After installation or replacement of a Cisco UCS C-Series Rack-Mount Server, the host does not boot.   Which four options should be verified? (Choose four.)

Accepted Answer

A)  Verify the power source to the equipment. 
B)  Check for loose HDD cables. 
C)  Reseat the DIMMs, CPU, and PCI cards. 
D)  Verify that power supplies are receiving power. 
E)  Reseat the mezzanine card connector.
F) Check the CPU sockets for bent pins.
G) Check the Cisco IMC for fan faults. 
A)  Verify the power source to the equipment. 
B)  Check for loose HDD cables. 
C)  Reseat the DIMMs, CPU, and PCI cards. 
D)  Verify that power supplies are receiving power. 
E)  Reseat the mezzanine card connector.
F) Check the CPU sockets for bent pins.
G) Check the Cisco IMC for fan faults.

Exam 1: Supporting Cisco Data Center System Devices (DCTECH)

Refer to the exhibit. Which statement correctly identifies the front panel LEDs on the Cisco UCS C220 Server?

Which three steps do you perform to troubleshoot when a rack server powers on with no video? (Choose three.)

Which Cisco NX-OS command displays kernel uptime?

Which two external features are in the Cisco UCS C125 M5 Compute Node? (Choose two.)

Which Cisco MDS model supports the most Fibre Channel ports per chassis?

Which two provide connectivity to Fabric Extenders? (Choose two.)

What do the small form-factor, x86 64-bit blade servers reside in Cisco branch-office router?

Which two commands allow you to view the state of high availability between the two clustered Fabric Interconnects? (Choose two.)

How do you find the serial number of a Cisco UCS 5108 Blade Server chassis?

Which tool does a network administrator not need when installing hardware?

Refer to the exhibit. Where is the best place to see bootflash free space?

Refer to the exhibit. Where is the best place to see whether the system is ready for a Fabric Interconnect failover?

When replacing a standalone C-Series server which order will be used to shut down the server via CIMC?

Which statement about RAID is true?

Which two major components does a Cisco Nexus 1000V Series Switch have? (Choose two.)

Which two form factors are available in the Cisco UCS E-Series Servers? (Choose two.)

Which three options are the minimum browser requirements to log into the Cisco CIMC GUI? (Choose three.)

Which method does FCIP use to enable connectivity of geographically distributed Fibre Channel SANs over IP?

Which statement is true about QSFP?

After installation or replacement of a Cisco UCS C-Series Rack-Mount Server, the host does not boot. Which four options should be verified? (Choose four.)

Cisco Certified Technician Routing & Switching (RSTECH)

Understanding Cisco Cybersecurity Operations Fundamentals (CBROPS)

Cisco Certified Network Associate (CCNA)

Managing Industrial Networks with Cisco Networking Technologies (IMINS)

DevNet Associate (DEVASC)

Conducting Forensic Analysis and Incident Response Using Cisco CyberOps Technologies (CBRFIR)

Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)

Implementing Cisco SD-WAN Solutions (ENSDWI)

Designing Cisco Enterprise Networks (ENSLD)

Designing Cisco Enterprise Wireless Networks (300-425 ENWLSD)

Implementing Cisco Enterprise Wireless Networks (300-430 ENWLSI)

Automating Cisco Enterprise Solutions (ENAUTO)

Implementing Cisco Service Provider Advanced Routing Solutions (SPRI)

Implementing Cisco Service Provider VPN Services (SPVI)

Designing Cisco Data Center Infrastructure (DCID)

Troubleshooting Cisco Data Center Infrastructure (DCIT)

Implementing Cisco Application Centric Infrastructure (DCACI)

Configuring Cisco MDS 9000 Series Switches (DCSAN)

Implementing Cisco Application Centric Infrastructure - Advanced

Automating Cisco Data Center Solutions (DCAUTO)

Securing Networks with Cisco Firepower (300-710 SNCF)

Implementing and Configuring Cisco Identity Services Engine (300-715 SISE)

Securing Email with Cisco Email Security Appliance (300-720 SESA)

Securing the Web with Cisco Web Security Appliance (300-725 SWSA)

Implementing Secure Solutions with Virtual Private Networks (SVPN 300-730)

Automating Cisco Security Solutions (SAUTO)

Implementing Cisco Collaboration Applications (CLICA)

Implementing Cisco Advanced Call Control and Mobility Services (CLASSM)

Implementing Cisco Collaboration Cloud and Edge Solutions

Implementing Cisco Collaboration Conferencing

Automating Cisco Collaboration Solutions (CLAUTO)

Implementing DevOps Solutions and Practices using Cisco Platforms (DEVOPS)

Developing Solutions Using Cisco IoT and Edge Platforms (DEVIOT)

Developing Applications for Cisco Webex and Webex Devices (DEVWBX)

Performing CyberOps Using Core Security Technologies (CBRCOR)

Implementing Cisco Enterprise Network Core Technologies (ENCOR)

Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)

Implementing and Operating Cisco Data Center Core Technologies (DCCOR)

Implementing and Operating Cisco Security Core Technologies

Implementing Cisco Collaboration Core Technologies (CLCOR)

Developing Applications using Cisco Core Platforms and APIs (DEVCOR)

CCDE Design Written

Deploying Cisco Unified Contact Center Express

Cisco Meraki Solutions Specialist

Securing Cisco Networks with Sourcefire FireAMP Endpoints

Designing Cisco Unified Contact Center Enterprise (UCCED)

Implementing and Supporting Cisco Unified Contact Center Enterprise (UCCEIS)

Cisco Collaboration SaaS Authorization Exam

Cisco Security Architecture for System Engineers

Adopting The Cisco Business Architecture Approach (DTBAA)

Cisco Customer Success Manager (CSM)

Mastering The Cisco Business Architecture Discipline (DTBAD)

Filters