Question 1

What are two types of FC/FCoE oversubscription ratios? (Choose two.)

Accepted Answer

A)  switch processing power to end-node processing power 
B)  port bandwidth to uplink bandwidth 
C)  server storage to end-node count 
D)  edge ISL bandwidth to core ISL bandwidth 
E)  host bandwidth to storage bandwidth 
A)  switch processing power to end-node processing power 
B)  port bandwidth to uplink bandwidth 
C)  server storage to end-node count 
D)  edge ISL bandwidth to core ISL bandwidth 
E)  host bandwidth to storage bandwidth

Question 2

The Cisco Nexus switch Generic Online Diagnostics policy for a PortLoopback test requires 10 consecutive failures to error disable the port. The customer wants to change it to 5 consecutive failures. Which configuration applies the changes for module 1 only?

Accepted Answer

A)  Nexus(config)# event manager applet custom-PortLoopback override __PortLoopback Nexus(config-applet)# event gold mod all test PortLoopback testing-type bootup consecutive-failure 5 Nexus(config-applet)# action 1 publish-event 
B)  Nexus(config-applet)# event gold mod 1 test PortLoopback testing-type bootup consecutive-failure 5 
C)  Nexus(config-applet)# event gold mod all test PortLoopback testing-type monitoring consecutive-failure 5 Nexus(config-applet)# action 1 policy-default 
D)  Nexus(config-applet)# event gold mod 1 test PortLoopback testing-type monitoring consecutive-failure 5 
A)  Nexus(config)# event manager applet custom-PortLoopback override __PortLoopback Nexus(config-applet)# event gold mod all test PortLoopback testing-type bootup consecutive-failure 5 Nexus(config-applet)# action 1 publish-event 
B)  Nexus(config-applet)# event gold mod 1 test PortLoopback testing-type bootup consecutive-failure 5 
C)  Nexus(config-applet)# event gold mod all test PortLoopback testing-type monitoring consecutive-failure 5 Nexus(config-applet)# action 1 policy-default 
D)  Nexus(config-applet)# event gold mod 1 test PortLoopback testing-type monitoring consecutive-failure 5

Question 3

Refer to the exhibit. Which command is run from the Guest Shell to set the description on the first five interfaces of the Cisco Nexus switch?

Accepted Answer

A)  [guestshell@guestshell ~]$ for x in {1..5}; dohost "conf t ; interface eth1/$x ; description Server$x"; 
B)  [guestshell@guestshell ~]$ for x in {1..5}; do dohost "conf t ; interface eth1/$x ; description Server$x"; done 
C)  [guestshell@guestshell ~]$ for x in (1..5); do dohost "conf t"; "interface eth1/$x" ; "description Server$x"; done 
D)  [guestshell@guestshell ~]$ for x in (1..5); dohost "conf t ; interface eth1/$x ; description Server$x"; 
A)  [guestshell@guestshell ~]$ for x in {1..5}; dohost "conf t ; interface eth1/$x ; description Server$x"; 
B)  [guestshell@guestshell ~]$ for x in {1..5}; do dohost "conf t ; interface eth1/$x ; description Server$x"; done 
C)  [guestshell@guestshell ~]$ for x in (1..5); do dohost "conf t"; "interface eth1/$x" ; "description Server$x"; done 
D)  [guestshell@guestshell ~]$ for x in (1..5); dohost "conf t ; interface eth1/$x ; description Server$x";

Question 4

A small remote office is set to connect to the regional hub site via NSSA ASBR. Which type of LSA is sent to the remote office OSPF area?

Accepted Answer

A)  type 7 LSA 
B)  type 1 LSA 
C)  type 5 LSA 
D)  type 3 LSA 
A)  type 7 LSA 
B)  type 1 LSA 
C)  type 5 LSA 
D)  type 3 LSA

Question 5

Which command reduces the amount of time it takes to complete the ISSU on a Cisco Nexus 7000 Series Switch that has dual supervisor modules and two I/O modules?

Accepted Answer

A) install all epld bootflash: parallel install all epld bootflash: parallel B) install all kickstart system parallel install all kickstart system C) install all kickstart system D) install all epld bootflash: A) install all epld bootflash: parallel install all epld bootflash: parallel B) install all kickstart system parallel install all kickstart system C) install all kickstart system D) install all epld bootflash:

Question 6

Refer to the exhibit. What is the result of implementing the configuration?

Accepted Answer

A)  The RADIUS server timeout value is 15 milliseconds. 
B)  RADIUS traffic is sourced from the VLAN 200 interface. 
C)  Users specify the RADIUS server when they log in. 
D)  Only the RADIUS server is used for authentication. 
A)  The RADIUS server timeout value is 15 milliseconds. 
B)  RADIUS traffic is sourced from the VLAN 200 interface. 
C)  Users specify the RADIUS server when they log in. 
D)  Only the RADIUS server is used for authentication.

Question 7

Due to a major version change, an engineer must perform a software upgrade on a Cisco Nexus Series switch. Which two technologies should be implemented to reduce disruptions to the network during the upgrade? (Choose two.)

Accepted Answer

A)  vPC 
B)  HSRP 
C)  VDC 
D)  MLAG 
E)  PAgP 
A)  vPC 
B)  HSRP 
C)  VDC 
D)  MLAG 
E)  PAgP

Question 8

A network architect must redesign a data center network based on OSPFv2. The network must perform fast reconvergence between directly connected switches. Which two actions must be taken to meet the requirements? (Choose two.)

Accepted Answer

A)  Set low OSPF hello and DEAD timers. 
B)  Configure all links on AREA 0. 
C)  Enable BFD for failure detection. 
D)  Use OSPF point-to-point links only. 
E)  Implement a virtual link between the switches. 
A)  Set low OSPF hello and DEAD timers. 
B)  Configure all links on AREA 0. 
C)  Enable BFD for failure detection. 
D)  Use OSPF point-to-point links only. 
E)  Implement a virtual link between the switches.

Question 9

Refer to the exhibit.   What is a characteristic presented in the service profile of the UUID?

Accepted Answer

A)  unique system generated 
B)  allocated from a UUID pool 
C)  vendor assigned 
D)  based on the hardware 
A)  unique system generated 
B)  allocated from a UUID pool 
C)  vendor assigned 
D)  based on the hardware

Question 10

The Cisco Nexus 5600 Series Switch experiences occasional packet drops on interface ethernet 1/16. An engineer wants to implement a SPAN session to investigate the issue further. The network analyzer to which the packets must be directed is located on interface 1/3. The analyzer is limited on disk space available for traffic capture, so the Nexus switch should send only the relevant data. Which two command sets configure the SPAN session that meets these requirements? (Choose two.)

Accepted Answer

A)    
B)    
C)    
D)    
E)    
A)    
B)    
C)    
D)    
E)

Question 11

A POAP-enabled Cisco Nexus switch will not enter POAP mode. Which two conditions should be verified? (Choose two.)

Accepted Answer

A)  No startup configuration is available. 
B)  The switch is in bootup process. 
C)  The license file is missing on the switch. 
D)  Bootflash must contain a special directory named POAP with poap.py file. 
E)  No Cisco NX-OS image is present on the bootflash. 
A)  No startup configuration is available. 
B)  The switch is in bootup process. 
C)  The license file is missing on the switch. 
D)  Bootflash must contain a special directory named POAP with poap.py file. 
E)  No Cisco NX-OS image is present on the bootflash.

Question 12

Which feature must be enabled to support the use of JSON and XML encodings when a Cisco Nexus 7000 Series Switch is deployed?

Accepted Answer

A)  Bash shell 
B)  NX-API 
C)  Open Agent Container 
D)  LLDP 
A)  Bash shell 
B)  NX-API 
C)  Open Agent Container 
D)  LLDP

Question 13

What is required for using Puppet in a Cisco NX-OS environment?

Accepted Answer

A)  OpenNP 
B)  XML management interface 
C)  NX-API 
D)  Open Agent Container 
A)  OpenNP 
B)  XML management interface 
C)  NX-API 
D)  Open Agent Container

Question 14

Refer to the exhibit.   What is the result of this series of commands?

Accepted Answer

A)  It reboots the server immediately. 
B)  It activates the firmware on the next adapter boot. 
C)  It updates the firmware on adapter 1/1/1 immediately. 
D)  It verifies the firmware update on the server. 
A)  It reboots the server immediately. 
B)  It activates the firmware on the next adapter boot. 
C)  It updates the firmware on adapter 1/1/1 immediately. 
D)  It verifies the firmware update on the server.

Question 15

The EPLD update of the supervisor module has been scheduled for several Cisco MDS 9000 Series Switches. What will be the impact of the update?

Accepted Answer

A)  All traffic is stopped for the duration of the EPLD update and the switch is rebooted after the upgrade is completed. 
B)  The redundant supervisor takes over while the EPLD update is in progress and the switch is rebooted after the upgrade is completed. 
C)  All control plane traffic is stopped for the duration of the EPLD update and the switch remains operational for the duration of the upgrade. 
D)  The redundant supervisor takes over while the EPLD update is in progress and there is no service disruption. 
A)  All traffic is stopped for the duration of the EPLD update and the switch is rebooted after the upgrade is completed. 
B)  The redundant supervisor takes over while the EPLD update is in progress and the switch is rebooted after the upgrade is completed. 
C)  All control plane traffic is stopped for the duration of the EPLD update and the switch remains operational for the duration of the upgrade. 
D)  The redundant supervisor takes over while the EPLD update is in progress and there is no service disruption.

Question 16

Refer to the exhibit.   What is the result of implementing this configuration?

Accepted Answer

A)  The switch queries the TACACS+ server by using an encrypted text PAP login. 
B)  The TACACS+ server uses the type-6 encrypted format. 
C)  The switch queries the TACACS+ server by using a clear text PAP login. 
D)  The timeout value on the TACACS+ server is 10 seconds. 
A)  The switch queries the TACACS+ server by using an encrypted text PAP login. 
B)  The TACACS+ server uses the type-6 encrypted format. 
C)  The switch queries the TACACS+ server by using a clear text PAP login. 
D)  The timeout value on the TACACS+ server is 10 seconds.

Question 17

A company is running a pair of Cisco Nexus 7706 Series Switches as part of a data center segment. All network engineers have restricted read-write access to the core switches. A network engineer must add a new FCoE VLAN to allow traffic from servers toward FCoE storage. Which set of actions must be taken to meet these requirements?

Accepted Answer

A)  1. Assign the network-admin role to a user. 2. Commit the role to the switch to the active user database. 
B)  1. Modify a network-operator role and add the required privileges. 2. Assign a VDC-operator role to a user. 
C)  1. Create a user-defined role and add the required privileges. 2. Assign a role to a user. 
D)  1. Add the required privilege to the VDC-admin role. 2. Commit the changes to the active user database. 
A)  1. Assign the network-admin role to a user. 2. Commit the role to the switch to the active user database. 
B)  1. Modify a network-operator role and add the required privileges. 2. Assign a VDC-operator role to a user. 
C)  1. Create a user-defined role and add the required privileges. 2. Assign a role to a user. 
D)  1. Add the required privilege to the VDC-admin role. 2. Commit the changes to the active user database.

Question 18

An engineer requires a solution to automate the configuration and deployment of remote network for a customer. The engineer must keep these considerations in mind: The customer's environment is based on industry-accepted standards and requires a solution that meets these standards. The security requirements mandate the use of a secure transport mechanism between the automation software and target devices such as SSH or TLS. The solution must be based on a human-readable and easy to parse format such as XML or JSON. Which solution must be used to meet these requirements?

Accepted Answer

A)  Ansible 
B)  REST API 
C)  NETCONF 
D)  SNMP 
A)  Ansible 
B)  REST API 
C)  NETCONF 
D)  SNMP

Question 19

A network engineer needs to configure system logging on the MDS switch. The messages must be displayed with the severity level of "warning" and above. For security reasons, the users must be logged out of the console after 5 minutes of inactivity. Which configuration must be applied to meet these requirements?

Accepted Answer

A)  MDS-A(config)# logging console 5 MDS-A(config-console)# exec-timeout 300 
B)  MDS-A(config)# line console MDS-A(config-console)# speed 38400 MDS-A(config-console)# exec-timeout 5 MDS-A(config)# logging console 4 
C)  MDS-A(config)# logging line 4 MDS-A(config-console)# session-limit 300 
D)  MDS-A(config)# console MDS-A(config-console)# session-limit 5 
A)  MDS-A(config)# logging console 5 MDS-A(config-console)# exec-timeout 300 
B)  MDS-A(config)# line console MDS-A(config-console)# speed 38400 MDS-A(config-console)# exec-timeout 5 MDS-A(config)# logging console 4 
C)  MDS-A(config)# logging line 4 MDS-A(config-console)# session-limit 300 
D)  MDS-A(config)# console MDS-A(config-console)# session-limit 5

Question 20

An engineer must configure OSPF in the data center. The external routes have already been redistributed into OSPF. The network most meets these criteria: • The data center servers must reach services in the cloud and the services behind the redistributed routes. • The exit point toward the Internet should be propagated only when there is a dynamically learned default route from the upstream router. Which feature is required?

Accepted Answer

A)  stubby area 
B)  totally stubby area 
C)  default-information originate 
D)  default-information originate always 
A)  stubby area 
B)  totally stubby area 
C)  default-information originate 
D)  default-information originate always

Exam 40: Implementing and Operating Cisco Security Core Technologies

What are two types of FC/FCoE oversubscription ratios? (Choose two.)

The Cisco Nexus switch Generic Online Diagnostics policy for a PortLoopback test requires 10 consecutive failures to error disable the port. The customer wants to change it to 5 consecutive failures. Which configuration applies the changes for module 1 only?

Refer to the exhibit. Which command is run from the Guest Shell to set the description on the first five interfaces of the Cisco Nexus switch?

A small remote office is set to connect to the regional hub site via NSSA ASBR. Which type of LSA is sent to the remote office OSPF area?

Which command reduces the amount of time it takes to complete the ISSU on a Cisco Nexus 7000 Series Switch that has dual supervisor modules and two I/O modules?

Refer to the exhibit. What is the result of implementing the configuration?

Due to a major version change, an engineer must perform a software upgrade on a Cisco Nexus Series switch. Which two technologies should be implemented to reduce disruptions to the network during the upgrade? (Choose two.)

A network architect must redesign a data center network based on OSPFv2. The network must perform fast reconvergence between directly connected switches. Which two actions must be taken to meet the requirements? (Choose two.)

Refer to the exhibit. What is a characteristic presented in the service profile of the UUID?

A POAP-enabled Cisco Nexus switch will not enter POAP mode. Which two conditions should be verified? (Choose two.)

Which feature must be enabled to support the use of JSON and XML encodings when a Cisco Nexus 7000 Series Switch is deployed?

What is required for using Puppet in a Cisco NX-OS environment?

Refer to the exhibit. What is the result of this series of commands?

The EPLD update of the supervisor module has been scheduled for several Cisco MDS 9000 Series Switches. What will be the impact of the update?

Refer to the exhibit. What is the result of implementing this configuration?

Supporting Cisco Data Center System Devices (DCTECH)

Cisco Certified Technician Routing & Switching (RSTECH)

Understanding Cisco Cybersecurity Operations Fundamentals (CBROPS)

Cisco Certified Network Associate (CCNA)

Managing Industrial Networks with Cisco Networking Technologies (IMINS)

DevNet Associate (DEVASC)

Conducting Forensic Analysis and Incident Response Using Cisco CyberOps Technologies (CBRFIR)

Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)

Implementing Cisco SD-WAN Solutions (ENSDWI)

Designing Cisco Enterprise Networks (ENSLD)

Designing Cisco Enterprise Wireless Networks (300-425 ENWLSD)

Implementing Cisco Enterprise Wireless Networks (300-430 ENWLSI)

Automating Cisco Enterprise Solutions (ENAUTO)

Implementing Cisco Service Provider Advanced Routing Solutions (SPRI)

Implementing Cisco Service Provider VPN Services (SPVI)

Designing Cisco Data Center Infrastructure (DCID)

Troubleshooting Cisco Data Center Infrastructure (DCIT)

Implementing Cisco Application Centric Infrastructure (DCACI)

Configuring Cisco MDS 9000 Series Switches (DCSAN)

Implementing Cisco Application Centric Infrastructure - Advanced

Automating Cisco Data Center Solutions (DCAUTO)

Securing Networks with Cisco Firepower (300-710 SNCF)

Implementing and Configuring Cisco Identity Services Engine (300-715 SISE)

Securing Email with Cisco Email Security Appliance (300-720 SESA)

Securing the Web with Cisco Web Security Appliance (300-725 SWSA)

Implementing Secure Solutions with Virtual Private Networks (SVPN 300-730)

Automating Cisco Security Solutions (SAUTO)

Implementing Cisco Collaboration Applications (CLICA)

Implementing Cisco Advanced Call Control and Mobility Services (CLASSM)

Implementing Cisco Collaboration Cloud and Edge Solutions

Implementing Cisco Collaboration Conferencing

Automating Cisco Collaboration Solutions (CLAUTO)

Implementing DevOps Solutions and Practices using Cisco Platforms (DEVOPS)

Developing Solutions Using Cisco IoT and Edge Platforms (DEVIOT)

Developing Applications for Cisco Webex and Webex Devices (DEVWBX)

Performing CyberOps Using Core Security Technologies (CBRCOR)

Implementing Cisco Enterprise Network Core Technologies (ENCOR)

Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)

Implementing and Operating Cisco Data Center Core Technologies (DCCOR)

Implementing Cisco Collaboration Core Technologies (CLCOR)

Developing Applications using Cisco Core Platforms and APIs (DEVCOR)

CCDE Design Written

Deploying Cisco Unified Contact Center Express

Cisco Meraki Solutions Specialist

Securing Cisco Networks with Sourcefire FireAMP Endpoints

Designing Cisco Unified Contact Center Enterprise (UCCED)

Implementing and Supporting Cisco Unified Contact Center Enterprise (UCCEIS)

Cisco Collaboration SaaS Authorization Exam

Cisco Security Architecture for System Engineers

Adopting The Cisco Business Architecture Approach (DTBAA)

Cisco Customer Success Manager (CSM)

Mastering The Cisco Business Architecture Discipline (DTBAD)

Filters