Question 1

Refer to the exhibit.   Which backup operation type does not include the Preserve Identities feature?

Accepted Answer

A)  full state 
B)  all configuration 
C)  logical configuration 
D)  system configuration 
A)  full state 
B)  all configuration 
C)  logical configuration 
D)  system configuration

Question 2

An engineer is implementing an import operation in Cisco UCS Manager. What is the impact of performing this operation?

Accepted Answer

A)  Information is modified on the management plane only. 
B)  A configuration is imported from a higher release to a lower release. 
C)  It is possible to schedule an import operation. 
D)  Only a configuration file that was exported from the same Cisco UCS Manager is allowed to be imported. 
A)  Information is modified on the management plane only. 
B)  A configuration is imported from a higher release to a lower release. 
C)  It is possible to schedule an import operation. 
D)  Only a configuration file that was exported from the same Cisco UCS Manager is allowed to be imported.

Question 3

Due to a domain name change at a customer site, a Cisco UCS cluster must be renamed. An engineer must recommend a solution to ensure that the Cisco UCS Manager is available over HTTPS. Which action accomplishes this goal?

Accepted Answer

A)  Regenerate the default key ring certificate manually 
B)  Reinstall the cluster to generate the default key ring certificate 
C)  Reboot the SSO component of the Cisco UCS Manager 
D)  Generate a new default key ring certificate from the Cisco UCS Manager 
A)  Regenerate the default key ring certificate manually 
B)  Reinstall the cluster to generate the default key ring certificate 
C)  Reboot the SSO component of the Cisco UCS Manager 
D)  Generate a new default key ring certificate from the Cisco UCS Manager

Question 4

Refer to the exhibit. A network engineer requires remote access via SSH to a Cisco MDS 9000 Series Switch. The solution must support secure access using the local user database when the RADIUS servers are unreachable from the switches. Which command meets these requirements?

Accepted Answer

A)  aaa authentication none 
B)  aaa authentication login default group radius 
C)  aaa authentication login default fallback error local 
D)  aaa authentication login default group local 
A)  aaa authentication none 
B)  aaa authentication login default group radius 
C)  aaa authentication login default fallback error local 
D)  aaa authentication login default group local

Question 5

An engineer updated firmware on Fabric Interconnects and activates it. However, the endpoint fails to boot from the new firmware image. What is expected to occur in this case?

Accepted Answer

A)  The system defaults to and boots into kickstart image 
B)  The system defaults to and boots into GOLD firmware image 
C)  The system defaults to the GOLD firmware image 
D)  The system defaults to the backup image version 
A)  The system defaults to and boots into kickstart image 
B)  The system defaults to and boots into GOLD firmware image 
C)  The system defaults to the GOLD firmware image 
D)  The system defaults to the backup image version

Question 6

An engineer is configuring a backup operation on the existing Cisco UCS environment using a logical configuration. Which configuration is expected to be saved by using this backup type?

Accepted Answer

A)  systems 
B)  roles 
C)  servers 
D)  service profiles 
A)  systems 
B)  roles 
C)  servers 
D)  service profiles

Question 7

Refer to the exhibit. A network engineer plans to upgrade the current software images of a Cisco Nexus switch. What is the impact of starting the EPLD upgrade?

Accepted Answer

A)  The switch reboots one time for the new EPLD versions to take effect. 
B)  The switch reboots multiple times for the new EPLD versions to take effect. 
C)  The switch skips the EPLD upgrade for each EPLD device of the switch. 
D)  The switch skips the EPLD upgrade for MIFPGA and proceeds with the other EPLD devices. 
A)  The switch reboots one time for the new EPLD versions to take effect. 
B)  The switch reboots multiple times for the new EPLD versions to take effect. 
C)  The switch skips the EPLD upgrade for each EPLD device of the switch. 
D)  The switch skips the EPLD upgrade for MIFPGA and proceeds with the other EPLD devices.

Question 8

An engineer must configure OSPF routing on Cisco Nexus 9000 Series Switches. The IP subnet of the Eth1/2 interfaces for both switches must be advertised via OSPF. However, these interfaces must not establish OSPF adjacency or send routing updates. The current OSPF adjacency over the interfaces Eth1/1 on SW1 and Eth1/1 on SW2 must remain unaffected. Which configuration must be applied to both Nexus switches to meet these requirements?

Accepted Answer

A)    
B)    
C)    
D)    
A)    
B)    
C)    
D)

Question 9

Which two firmware packages are included in the Cisco UCS C-Series Rack-Mount UCS-Managed Server Software bundle? (Choose two.)

Accepted Answer

A)  CIMC 
B)  BIOS 
C)  PSU 
D)  system 
E)  third-party 
A)  CIMC 
B)  BIOS 
C)  PSU 
D)  system 
E)  third-party

Question 10

An engineer is configuring a vHBA template in UCS Manager. The engineer needs to specify the logical addresses used by the vHBA and the path through which the SAN traffic flows. Which two resources must be specified in the vHBA template? (Choose two.)

Accepted Answer

A)  MAC addresses 
B)  WWPN Pool 
C)  WWNN 
D)  Fabric ID 
E)  VLAN ID 
A)  MAC addresses 
B)  WWPN Pool 
C)  WWNN 
D)  Fabric ID 
E)  VLAN ID

Question 11

Which two statements about modifying Cisco UCS user accounts are true? (Choose two.)

Accepted Answer

A)  Disabling a user account maintains all of the data in the Cisco UCS Fabric Interconnect. 
B)  The admin account can be used to log on by using SSH only. 
C)  The password of the user account must contain a minimum of 10 characters. 
D)  Local user accounts override the same account on a remote authentication server, such as TACACS, RADIUS, or LDAP. 
E)  The password of the user account expires in 30 days. 
A)  Disabling a user account maintains all of the data in the Cisco UCS Fabric Interconnect. 
B)  The admin account can be used to log on by using SSH only. 
C)  The password of the user account must contain a minimum of 10 characters. 
D)  Local user accounts override the same account on a remote authentication server, such as TACACS, RADIUS, or LDAP. 
E)  The password of the user account expires in 30 days.

Question 12

A Cisco MDS 9000 Series Storage Switch has reloaded unexpectedly. Where does the engineer look for the latest core dump file?

Accepted Answer

A)  /mnt/recovery 
B)  /mnt/core 
C)  /mnt/logs 
D)  /mnt/pss 
A)  /mnt/recovery 
B)  /mnt/core 
C)  /mnt/logs 
D)  /mnt/pss

Question 13

Which two statements about the process at upgrading an EPLD on a Cisco MDS 9000 Series Switch are correct? (Choose two.)

Accepted Answer

A)  EPLDs can be upgraded only to the latest EPLD image. 
B)  EPLD upgrades can be completed without powering down the module during the upgrade. 
C)  An upgrade verification identifies the impact of each EPLD upgrade. 
D)  The EPLDs for all the modules on a switch must be upgraded at the same time. 
E)  EPLDs can be upgraded without replacing the hardware. 
A)  EPLDs can be upgraded only to the latest EPLD image. 
B)  EPLD upgrades can be completed without powering down the module during the upgrade. 
C)  An upgrade verification identifies the impact of each EPLD upgrade. 
D)  The EPLDs for all the modules on a switch must be upgraded at the same time. 
E)  EPLDs can be upgraded without replacing the hardware.

Question 14

Which configuration implements static ingress replication?

Accepted Answer

A)    
B)    
C)    
D)    
A)    
B)    
C)    
D)

Question 15

A server engineer wants to control power usage on a Cisco UCS C-Series rack server down to the component level. Which two components support specific power limits? (Choose two.)

Accepted Answer

A)  storage controller 
B)  network controller 
C)  processor 
D)  graphic card 
E)  memory 
A)  storage controller 
B)  network controller 
C)  processor 
D)  graphic card 
E)  memory

Question 16

Refer to the exhibit.   An engineer configures a new application profile using REST API and receives this error message. Which method can be used before the application profile can be configured?

Accepted Answer

A)  GET to aaaListDomains 
B)  POST to aaaRefresh 
C)  POST to aaaLogin 
D)  POST to aaaLogout 
A)  GET to aaaListDomains 
B)  POST to aaaRefresh 
C)  POST to aaaLogin 
D)  POST to aaaLogout

Question 17

What is an advantage of using Ansible for automation as compared to Puppet and Chef?

Accepted Answer

A)  Ansible performs automation without installing a software agent on the target node. 
B)  Ansible abstracts a scenario so that one set of configuration settings can be used across multiple operating systems. 
C)  Ansible automates the enforcement of configuration settings. 
D)  Ansible configures a set of CLI commands on a device by using NETCONF. 
A)  Ansible performs automation without installing a software agent on the target node. 
B)  Ansible abstracts a scenario so that one set of configuration settings can be used across multiple operating systems. 
C)  Ansible automates the enforcement of configuration settings. 
D)  Ansible configures a set of CLI commands on a device by using NETCONF.

Question 18

Which product includes prebuilt templates that can be used to customize fabric deployments?

Accepted Answer

A)  Cisco Tetration 
B)  Cisco Data Center Network Manager 
C)  Cisco ACI 
D)  Cisco UCS Manager 
A)  Cisco Tetration 
B)  Cisco Data Center Network Manager 
C)  Cisco ACI 
D)  Cisco UCS Manager

Question 19

Refer to the exhibit. An engineer needs to implement streaming telemetry on a Cisco MDS 9000 Series Switch. The requirement is for the show command data to be collected every 30 seconds and sent to receivers. Which command must be added to the configuration to meet this requirement?

Accepted Answer

A)  snsr-grp 200 sample-interval 30000 
B)  snsr-grp 200 sample-interval 30 
C)  sensor-grp 200 sample-period 30 
D)  sensor-grp 200 sample-period 30000 
A)  snsr-grp 200 sample-interval 30000 
B)  snsr-grp 200 sample-interval 30 
C)  sensor-grp 200 sample-period 30 
D)  sensor-grp 200 sample-period 30000

Question 20

The engineer must configure SPAN on a Cisco Nexus 5000 Series Switch to get a capture of the traffic from these applications for an in-depth packet analysis. Which two SPAN characteristics must be considered? (Choose two.)

Accepted Answer

A)  SPAN source ports can be monitored in multiple SPAN sessions. 
B)  The Ethernet, FC, vFC, port channel, SAN port channel can be used as SPAN source ports. 
C)  A SPAN source port cannot be a destination SPAN port. 
D)  Only Ethernet, FC, vFC, port channel port types can be used as SPAN source ports. 
E)  The rx/tx option is available for VLAN or VSAN SPAN sessions. 
A)  SPAN source ports can be monitored in multiple SPAN sessions. 
B)  The Ethernet, FC, vFC, port channel, SAN port channel can be used as SPAN source ports. 
C)  A SPAN source port cannot be a destination SPAN port. 
D)  Only Ethernet, FC, vFC, port channel port types can be used as SPAN source ports. 
E)  The rx/tx option is available for VLAN or VSAN SPAN sessions.

Exam 40: Implementing and Operating Cisco Security Core Technologies

Refer to the exhibit. Which backup operation type does not include the Preserve Identities feature?

An engineer is implementing an import operation in Cisco UCS Manager. What is the impact of performing this operation?

Due to a domain name change at a customer site, a Cisco UCS cluster must be renamed. An engineer must recommend a solution to ensure that the Cisco UCS Manager is available over HTTPS. Which action accomplishes this goal?

Refer to the exhibit. A network engineer requires remote access via SSH to a Cisco MDS 9000 Series Switch. The solution must support secure access using the local user database when the RADIUS servers are unreachable from the switches. Which command meets these requirements?

An engineer updated firmware on Fabric Interconnects and activates it. However, the endpoint fails to boot from the new firmware image. What is expected to occur in this case?

An engineer is configuring a backup operation on the existing Cisco UCS environment using a logical configuration. Which configuration is expected to be saved by using this backup type?

Refer to the exhibit. A network engineer plans to upgrade the current software images of a Cisco Nexus switch. What is the impact of starting the EPLD upgrade?

Which two firmware packages are included in the Cisco UCS C-Series Rack-Mount UCS-Managed Server Software bundle? (Choose two.)

An engineer is configuring a vHBA template in UCS Manager. The engineer needs to specify the logical addresses used by the vHBA and the path through which the SAN traffic flows. Which two resources must be specified in the vHBA template? (Choose two.)

Which two statements about modifying Cisco UCS user accounts are true? (Choose two.)

A Cisco MDS 9000 Series Storage Switch has reloaded unexpectedly. Where does the engineer look for the latest core dump file?

Which two statements about the process at upgrading an EPLD on a Cisco MDS 9000 Series Switch are correct? (Choose two.)

Which configuration implements static ingress replication?

A server engineer wants to control power usage on a Cisco UCS C-Series rack server down to the component level. Which two components support specific power limits? (Choose two.)

Refer to the exhibit. An engineer configures a new application profile using REST API and receives this error message. Which method can be used before the application profile can be configured?

What is an advantage of using Ansible for automation as compared to Puppet and Chef?

Which product includes prebuilt templates that can be used to customize fabric deployments?

Refer to the exhibit. An engineer needs to implement streaming telemetry on a Cisco MDS 9000 Series Switch. The requirement is for the show command data to be collected every 30 seconds and sent to receivers. Which command must be added to the configuration to meet this requirement?

The engineer must configure SPAN on a Cisco Nexus 5000 Series Switch to get a capture of the traffic from these applications for an in-depth packet analysis. Which two SPAN characteristics must be considered? (Choose two.)

Supporting Cisco Data Center System Devices (DCTECH)

Cisco Certified Technician Routing & Switching (RSTECH)

Understanding Cisco Cybersecurity Operations Fundamentals (CBROPS)

Cisco Certified Network Associate (CCNA)

Managing Industrial Networks with Cisco Networking Technologies (IMINS)

DevNet Associate (DEVASC)

Conducting Forensic Analysis and Incident Response Using Cisco CyberOps Technologies (CBRFIR)

Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)

Implementing Cisco SD-WAN Solutions (ENSDWI)

Designing Cisco Enterprise Networks (ENSLD)

Designing Cisco Enterprise Wireless Networks (300-425 ENWLSD)

Implementing Cisco Enterprise Wireless Networks (300-430 ENWLSI)

Automating Cisco Enterprise Solutions (ENAUTO)

Implementing Cisco Service Provider Advanced Routing Solutions (SPRI)

Implementing Cisco Service Provider VPN Services (SPVI)

Designing Cisco Data Center Infrastructure (DCID)

Troubleshooting Cisco Data Center Infrastructure (DCIT)

Implementing Cisco Application Centric Infrastructure (DCACI)

Configuring Cisco MDS 9000 Series Switches (DCSAN)

Implementing Cisco Application Centric Infrastructure - Advanced

Automating Cisco Data Center Solutions (DCAUTO)

Securing Networks with Cisco Firepower (300-710 SNCF)

Implementing and Configuring Cisco Identity Services Engine (300-715 SISE)

Securing Email with Cisco Email Security Appliance (300-720 SESA)

Securing the Web with Cisco Web Security Appliance (300-725 SWSA)

Implementing Secure Solutions with Virtual Private Networks (SVPN 300-730)

Automating Cisco Security Solutions (SAUTO)

Implementing Cisco Collaboration Applications (CLICA)

Implementing Cisco Advanced Call Control and Mobility Services (CLASSM)

Implementing Cisco Collaboration Cloud and Edge Solutions

Implementing Cisco Collaboration Conferencing

Automating Cisco Collaboration Solutions (CLAUTO)

Implementing DevOps Solutions and Practices using Cisco Platforms (DEVOPS)

Developing Solutions Using Cisco IoT and Edge Platforms (DEVIOT)

Developing Applications for Cisco Webex and Webex Devices (DEVWBX)

Performing CyberOps Using Core Security Technologies (CBRCOR)

Implementing Cisco Enterprise Network Core Technologies (ENCOR)

Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)

Implementing and Operating Cisco Data Center Core Technologies (DCCOR)

Implementing Cisco Collaboration Core Technologies (CLCOR)

Developing Applications using Cisco Core Platforms and APIs (DEVCOR)

CCDE Design Written

Deploying Cisco Unified Contact Center Express

Cisco Meraki Solutions Specialist

Securing Cisco Networks with Sourcefire FireAMP Endpoints

Designing Cisco Unified Contact Center Enterprise (UCCED)

Implementing and Supporting Cisco Unified Contact Center Enterprise (UCCEIS)

Cisco Collaboration SaaS Authorization Exam

Cisco Security Architecture for System Engineers

Adopting The Cisco Business Architecture Approach (DTBAA)

Cisco Customer Success Manager (CSM)

Mastering The Cisco Business Architecture Discipline (DTBAD)

Filters